Pic of Rusty's Diff Skid

Spike6901 · **Posted:** Tue Mar 13, 2007 11:30 am

I was asked to post this a while back. This is Rusty's diff skid installed. It was easy and fit perfect. It was under $50 too.

psinsyd · **Posted:** Tue Mar 13, 2007 5:47 pm

I've got the same one sitting at home waiting to be installed. I was debating a couple of coats of primer and then a couple of coats of black over that.

It looks like you used different bolts for the cover. I thought everyone was using the stock bolts. Were the stockers a bit too short?

Thanks for the pic!

sgoat · **Posted:** Thu Mar 15, 2007 9:30 pm

Get yourself some Duplicolor Spray-on bedliner (Pepboys,etc.) and be done with it. Works great!

Spike6901 · **Posted:** Fri Mar 16, 2007 11:20 am

Mine came with bolts. Yours did not? They are Allen Wrench type and longer than stock.

I sort of like the way it looks. Also, when you bang it on a rock, the paint does not come off. It is not like it is going to rust.

Video Guy · **Posted:** Fri Mar 16, 2007 1:34 pm

Spike6901 wrote:

Also, when you bang it on a rock, the paint does not come off.

Talk about treading lightly. Not even paint left behind.

This is definitely the environmentally sound approach.

Spike6901 · **Posted:** Fri Mar 16, 2007 3:26 pm

Here is another view of me bum. Hopefully it helps the KJ look a little more 'trail rated'.

psinsyd · **Posted:** Sat Mar 17, 2007 9:57 pm

Spike6901 wrote:

Mine came with bolts. Yours did not? They are Allen Wrench type and longer than stock.

I sort of like the way it looks. Also, when you bang it on a rock, the paint does not come off. It is not like it is going to rust.

Sorry to chime in on this so late.....

I bought mine used, no bolts.... maybe I can call Rusty's or just stop by the hardware store and pick some up....I'm thinkin the hardware store route would be cheaper.

psinsyd · **Posted:** Sat Mar 17, 2007 10:00 pm

sgoat wrote:

Get yourself some Duplicolor Spray-on bedliner (Pepboys,etc.) and be done with it. Works great!

That's a good point. I think I have a can of the stuff in the garage too.

OzLtd · **Posted:** Sat Mar 17, 2007 11:46 pm

That looks pretty good imo. Easy install too, dont have to crack the original cover & drain.

Pic of Rusty's Diff Skid

Who is online