I was just wondering how thick the conduit nuts are that you guys used for the clevis lift? I made my own spacers on the cnc lathe that I run at work and was just wondering how thick they are compared to the nuts? I used 2.65"ODx2.215"IDx0.200"thick. One each side. Leveled out the KJ perfectly, to my eye... pics coming as soon as I get my tires in and on, I promise!

_________________
Ron


"There are few problems in life the liberal application of duct tape can't solve."

The conduit nuts are about 1/8",3/16" thick right about !

_________________
2002 Liberty Limited
2.5" Rusty's Coil Lift + OME 927 springs + 1/4" spacers
265x70 Revos
Warn 4x Floods
ARB bumper
TeraFlex extended front bumpstops
Rock Lizard Skink Super Sliders
Bosch Size 86 battery
Jeepin by Al's 4.5 UC Arms
Kryptonite Differential Cover
JBA Bolt on KJ Tri-Angulated 4 Link

Thanks, USP. That helps. From the looks of it, they appear to be 1/8" so I have .05" less that that. Just about what I was aiming for. Like I said, it looks perfect, to me. And I got my Silentarmors (245/70-17) on it today. Won't be able to go off-road til the weekend but, so far there is absolutely no rubbing, without any trimming. I'm pretty sure that will change once it flexes a little, though. Not far from the pinch weld as is. Looks like it'll probably rub when stuffed but, maybe not. At least it doesn't look like I stole tires off a minivan, now.

_________________
Ron


"There are few problems in life the liberal application of duct tape can't solve."