Someone here was nice enough to send me the instructions so I can see how that initial piece gets fitted to the crossmember. It looks like I will have to straighten it some so the ARB piece can sit flush. I think its dented in right where you have to drill the holes into the front face on the drivers side. That is good because those bolts and bar nut will prob help draw out the metal. The two ends (and most everything in between) are straight, just bent in a little under the headlight. I also noticed last night that there is a busted black wire in the wire loom. That would explain why my passenger blinker is blinking fast and the side i actually got hit on still works fine. That was a puzzler.... thanks!

_________________
Pre-Lowered 02 Liberty
2.5" Rustys Coil w/ Ranchos in the rear.
ARB, OME927's, 1/4 strut plate and Als Gen 4.5 Uppers in the front.
Flowmaster Super 40 Series (GONE, SO QUIET!)
245/75/16 Kumho KL-78 w/ Spidertraxxxxx
Ripped out the plastic inner wheel liners
Herculined ALLLL over.....

Can I get a copy of those installation instructions?
I have an ARB on the way and I would like to figure out the install prior to.
Any help would be appreciated.

_________________
05 Renegade w/ Select-Trac, Trac-Lok, Mopar Skids, Tow Pkg.
2" BDS Lift, DC-1 Black Rims, Wrangler MTR (245/75 R16)
M8000 winch, Mopar Neoprene Seat Covers

With out violating any copy-right stuff. Would it be possible to post those instructions somewhere?

I am getting one also and would love to have a heads up on the install. It's killing me.

_________________
'07 Ltd 3.7L, Black, OME HD's, OME shocks, Mopar Skids, AEV Bridgers w/ TPMS, Kumho KL78's, ARB Bumper, KC 130 Watters, Warn M8000 Winch, Rock Lizard Gecko Roof Basket KC 150 watters, Cobra 75WSX, 3 ft FireFly, RL Super Step Skinks

It may be possible, what I did was just email Seth at ARB and he sent them to me, which I will contiue to be ever grateful for him doing. Hope one day I can shake the hand of someone who goes out of their way just to be a nice guy like he is. I have sent them on to others so if you want just pm me an email address, if I get into trouble with Seth.....well I am sorry and will never do it again!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited