Ok, have a taillight out. Posted on another thread about removing the driver side brake light assembly. I have the 2 screws out and it moves a little, but is VERY stubborn to come out. I don't want to break anything. Thoughts?

_________________
"It's better to be alive and cool, than dead and uncool."
2003 Liberty Sport
Pretty Much Bone Stock
Wishin it was a 4x4

Just pull straight out, it will feel as if you are going to break it but if you have the two screws out it will come out just keep pulling! May have to sort of wiggle it back and forth some but it will come out

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Thx Tom,

I got it just after posting. Weird that it does not feel as solid going back in. Just kinda plugs in place. Such a B!tch to get out, did feel like I was pulling teeth...

_________________
"It's better to be alive and cool, than dead and uncool."
2003 Liberty Sport
Pretty Much Bone Stock
Wishin it was a 4x4