When the front and rear wiper arms get dull, what kind of black paint is best, to repaint and renew my wipers? Right now, they are starting to dull a bit on my 2002 Liberty. Thanks.

This might be overkill, but I'd see if they can be powder coated.

powder coat yes that would be OVERKILL, just sand down primer them then shoot with some semi gloss black, cheap effective and will last a few more years

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

rustoleum! it will work just fine and is a couple bucks at lowes.

_________________
-Jon-
02 Jeep Liberty - LOST Trail Tested Edition - sold
09 VW Tiguan 4motion - current

Hey! You'd never have to repaint them again!

Personally, I'd still consider it

I just re-painted mine with regular Kylon paint.

_________________
"I'm the guy who does his job, you must be the other guy"
02 Black UNlimited Edition 4X4 Select Trac Liberty Towing/Off Road Packages 245/75/16 on black Moabs
RL diff cover/Super Skink sliders, Rusty's 2.5" Coil Lift w/ clevis lift, Roof basket W/Hella FF75...
On the prowl for an M416/M101/M100 trailer
L.O.S.T. Member 2877

use SEM TRIM BLACK after a light wet sanding... ( krylon and rustoleum are not designed for this ). they will look brand new and this paint is designed to last... i have used it for all exterior black pieces on all my vehicles. u should be able to get it at any automotive paint supply store. about 10.00 a can and worth every penny!!!! can also find it on ebay sometimes.. hope this helps!!!!

_________________
04 SILVER KJ 4X4 LIMITED
5/8" CLEVIS LIFT
CLEAR CORNERS
245/70/16 A/T TIRES
MOPAR FACTORY SUB SOON!!!!