I will be installing a 2" ome lift on my liberty and I'm also due for new tires. Can I fit a 255/70/16 without any rubbing issuses? the tire is 30.1" tall and 10.3" wide tread according to tirerack.

yes, pound over the pinch weld and you should be fine, maybe some trimming in front , some have to others dont depends on the tires you choose, like BFGs are a wide square tire

tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

I'll be going with the bridgestone dueller A/T revo's

how do i fix the pinch weld issue

_________________
04 KJ sport Patriot Blue
Hella 500's
Tail Light Covers
Mopar Rear Tow Hook
Pathfinder AT's

good question, I dont even know what the pinch weld is :shock: but i figured id just "fix" anything with a clearance issue

The wheel well behind the front tire - there's a plastic liner sticking out - underneath the liner is a seam where 2 body panels are welded - you need to bend it, not cut it off - it holds body panels together.

Tokojoe's writeup
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=7690&highlight=pinch+weld

Moose's pictures

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur