It is currently Fri Nov 06, 2026 5:52 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 32 posts ]  Go to page Previous  1, 2
Author Message
 Post subject:
PostPosted: Sun Oct 07, 2007 7:42 pm 
Offline
LOST Member

Joined: Sat Jul 29, 2006 11:45 am
Posts: 173
Location: ohio
Christopher wrote:
See were it says New Process....hence the NP, like Brian stated.

Chris
you might want to read my previous post i never claimed it was an nv. i claimed it was a bigger case than the 231, and i also claimed it wasn't the 242, and finally i claimed it was related (similair) to the 241 in the trucks. now my 241 doesn't have a pto like the truck but i bet the the liberty 241 shares some internals with the trucks. as far as the pictures go, i proved my case. mike

_________________
06 kj 3.7 nsg 370 np 241 dark khaki


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 07, 2007 7:55 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Aug 26, 2005 6:11 pm
Posts: 995
Location: Fresno, CA
k99jk99j wrote:
Christopher wrote:
See were it says New Process....hence the NP, like Brian stated.

Chris
you might want to read my previous post i never claimed it was an nv. i claimed it was a bigger case than the 231, and i also claimed it wasn't the 242, and finally i claimed it was related (similair) to the 241 in the trucks. now my 241 doesn't have a pto like the truck but i bet the the liberty 241 shares some internals with the trucks. as far as the pictures go, i proved my case. mike


Yea we know that you didnt claim it was an NV like the other uninformed guys were spoutin off with :roll: BUT you did say this...

k99jk99j wrote:
ok just climbed under it it says 241J nothing else but the serial # and the model #.

it does not give a designation of nv or np in front of it. mike


Chris was pointin out that the desgination of NP and NV is RIGHT THERE in the pic you posted!!! It says NEW PROCESS right on the tag, therefore there is a desgination, makin it the NP241J

_________________
Brian

'05 Yellow TJ Rubicon 6spd

Click here for my Jeep Mods

Redneck Yacht Club for life!!


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 07, 2007 7:56 pm 
Offline
LOST Member

Joined: Mon Aug 27, 2007 12:41 pm
Posts: 208
Location: Michigan Lansing
Thanks Brian, no offense intended

Chris

_________________
2002 Liberty, 3.7L auto, Franky


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 07, 2007 8:28 pm 
Offline
LOST Member

Joined: Sat Jul 29, 2006 11:45 am
Posts: 173
Location: ohio
i'm not tryin to get on your nerves and i see it says new process but all the other cases i have (in other jeeps) clearly say np then a space infront of the 231 242 etc... i believe it is an np but it is just not clear from the factory. and i think that is where all the confusion with everybody else is coming from. mike

_________________
06 kj 3.7 nsg 370 np 241 dark khaki


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 07, 2007 8:41 pm 
Offline
This member has been Banned

Joined: Thu Mar 16, 2006 7:18 pm
Posts: 2301
Location: Harahan LA (the burbs)
k99jk99j wrote:
Christopher wrote:
See were it says New Process....hence the NP, like Brian stated.

Chris
you might want to read my previous post i never claimed it was an nv. i claimed it was a bigger case than the 231, and i also claimed it wasn't the 242, and finally i claimed it was related (similair) to the 241 in the trucks. now my 241 doesn't have a pto like the truck but i bet the the liberty 241 shares some internals with the trucks. as far as the pictures go, i proved my case. mike



It is not like the NV241HD found in the dodge trucks ,the guts in those are MUCH BIGGER
it is more like the guts of a NP231 in a bigger housing

And to proving your case the big issue is with the NP and NV that is all
we know NP made a 241 that was used in LIGHT duty trucks up to 1/2 ton and LIGHT duty 3/4 ton
they are slightly different as far as input shafts but the in sides are basicaly 231's
and if you look under a TJ with a NP231 it has only 231 stamped in it NO J after the number
that is because they were ONLY used in jeeps
the 241 you have was used by GM and Dodge as well as Jeep thus the 241J
I dont know for sure but I would bet that a NP241 in a GM truck would read
241GM
Just a guess thow


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 07, 2007 8:55 pm 
Offline
LOST Member

Joined: Sat Jul 29, 2006 11:45 am
Posts: 173
Location: ohio
jason thompson wrote:
k99jk99j wrote:
Christopher wrote:
See were it says New Process....hence the NP, like Brian stated.

Chris
you might want to read my previous post i never claimed it was an nv. i claimed it was a bigger case than the 231, and i also claimed it wasn't the 242, and finally i claimed it was related (similair) to the 241 in the trucks. now my 241 doesn't have a pto like the truck but i bet the the liberty 241 shares some internals with the trucks. as far as the pictures go, i proved my case. mike





we know NP made a 241 that was used in LIGHT duty trucks up to 1/2 ton and LIGHT duty 3/4 ton
they are slightly different as far as input shafts but the in sides are basicaly 231's

the 241 you have was used by GM and Dodge as well as Jeep
Just a guess thow
i also never claimed it was an hd. but i did claim they were used in trucks just like your above quote! mike

_________________
06 kj 3.7 nsg 370 np 241 dark khaki


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 07, 2007 9:03 pm 
Offline
This member has been Banned

Joined: Thu Mar 16, 2006 7:18 pm
Posts: 2301
Location: Harahan LA (the burbs)
k99jk99j wrote:
jason thompson wrote:
k99jk99j wrote:
Christopher wrote:
See were it says New Process....hence the NP, like Brian stated.

Chris
you might want to read my previous post i never claimed it was an nv. i claimed it was a bigger case than the 231, and i also claimed it wasn't the 242, and finally i claimed it was related (similair) to the 241 in the trucks. now my 241 doesn't have a pto like the truck but i bet the the liberty 241 shares some internals with the trucks. as far as the pictures go, i proved my case. mike





we know NP made a 241 that was used in LIGHT duty trucks up to 1/2 ton and LIGHT duty 3/4 ton
they are slightly different as far as input shafts but the in sides are basicaly 231's

the 241 you have was used by GM and Dodge as well as Jeep
Just a guess thow
i also never claimed it was an hd. but i did claim they were used in trucks just like your above quote! mike



This is from another topic and i coppied and pasted it from another site a while back
note the NP231/241
note also the "tipically found in V8 aplications" this is why I keep saying
"they are the same guts in a different housing"

Starting in about 1987, the New Process 231/241 series transfer case became standard in Jeep, Dodge, and Chevrolet applications. These transfer cases are part time 4WD (Shift positions 2HI - 4HI - N - 4L). They have a relatively thin aluminum housing. They are 1:1 direct drive in high range, and use planetary reduction gears for low range with a ratio of 2.72:1 They use chain drive for the front output. The NP241 was typically used in V8 applications.
Exact identification:

These New Process cases have a circular plate, about 2" in dia., on the rear of the case, in the center. Full identification info for the case is on this plate


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 09, 2007 10:50 am 
Offline
LOST Member
User avatar

Joined: Mon Aug 14, 2006 11:38 am
Posts: 493
Location: Highlands Ranch, Colorado
jason thompson wrote:
kj in a tight spot wrote:
TheJawsOfDeath wrote:
I crawled under my 2006 with the NSG370 6-speed and I have an NV241.


Like Jason said yall, carry over from another thread...Jaws of Death and hoopersfish proved themselves wrong, they DONT have a NV241 like they claim :lol: :wink:



Brian & every one else
I dont want this to sound like a pissing contest
but fact is KJ's have NP cases in them
and for that matter the weaker of the case offered is the NP242 and I would bet that less than 1% of all KJ owners would push their KJ harder than what a NP242 case can handle let alone the NP231 so to sit there and and drool over a "stronger" T-case is just dumb

It is simply a marketing ploy to make you think you are getting some thing special so you pay more for a case you do not need and they pay very very little ,Chrysler owns NV who owns NP and after some time this year will be owned by some one else so who knows what you will get

I have a NP242 in the KJ it is more than strong enough for a KJ
My TJ has a NP231 it is SYE'd and next year will be terra lowed
I know what I have and what it can do/have done


I really don't think it was a marketing ploy. I called my service dealer and he thought it had a 231 as well. They don't push the fact that the 6 speeds come with the 241's at all.(maybe the new models come w/231's?) I can't imagine that the231 isn't strong enough for the 6 speeds. Going on line, the 241's look to be about $100 more than the 231's. So why would chrysler put a more expensive case in a vehicle that lists quite a bit less than the autos? Is there a need for added transfer case size and/or strength w/ the 6 speeds? I don't think so. Maybe jeep had a bunch of these older 241's laying around and wanted to get rid of them. I do not know sales #'s, but the auto way out sells the manuals. So with the relatively small manual units being sold, maybe they thought of it as a perfect opportunity to put em on the manuals. So what do you guys think? Is chrysler just unloading old product?

_________________
'06 3.7 sport 6 speed (long live manual tranny's)
tinted windows, cruise, midnight blue
Mopar roof rack
Royal Purple Synchromax in tranny
Royal Purple Maxgear in pumpkins
Full mopar skids, front diff collar
Future mods: Rock rails, B.F. Goodrich all terains. (In my dreams: Frankenlift)


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 09, 2007 11:48 am 
Offline
LOST Member

Joined: Sat Jul 29, 2006 11:45 am
Posts: 173
Location: ohio
i don't think they are unloading old stock, because almost all manufactures employ just in time manufacturing (to keep inventory low). i think it was more likley an engineering decision which we will probably never here the reason why? maybe it was cheaper to enginneer the np241j on the back of the sixspeed? who knows? i agree with you about the marketing! when i ordered mine they swore (dealer)it would have the 231. and then it shows up with the np241j? everbody was mystified and a call to the district rep couln't even solve the riddle. i'm happy however! mike

_________________
06 kj 3.7 nsg 370 np 241 dark khaki


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 09, 2007 12:57 pm 
Offline
LOST Member
User avatar

Joined: Mon Aug 14, 2006 11:38 am
Posts: 493
Location: Highlands Ranch, Colorado
k99jk99j wrote:
i don't think they are unloading old stock, because almost all manufactures employ just in time manufacturing (to keep inventory low). i think it was more likley an engineering decision which we will probably never here the reason why? maybe it was cheaper to enginneer the np241j on the back of the sixspeed? who knows? i agree with you about the marketing! when i ordered mine they swore (dealer)it would have the 231. and then it shows up with the np241j? everbody was mystified and a call to the district rep couln't even solve the riddle. i'm happy however! mike


Thanks for the reply Mike. I think everyone is kind of in shock that it is even in there. We know how the manufacturers can try to pinch pennies i.e. window regulators! But as you said, I am glad it is in mine as well. :o

_________________
'06 3.7 sport 6 speed (long live manual tranny's)
tinted windows, cruise, midnight blue
Mopar roof rack
Royal Purple Synchromax in tranny
Royal Purple Maxgear in pumpkins
Full mopar skids, front diff collar
Future mods: Rock rails, B.F. Goodrich all terains. (In my dreams: Frankenlift)


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 09, 2007 6:41 pm 
Offline
This member has been Banned

Joined: Thu Mar 16, 2006 7:18 pm
Posts: 2301
Location: Harahan LA (the burbs)
hooperswish wrote:
I really don't think it was a marketing ploy. I called my service dealer and he thought it had a 231 as well. They don't push the fact that the 6 speeds come with the 241's at all.(maybe the new models come w/231's?) I can't imagine that the231 isn't strong enough for the 6 speeds. Going on line, the 241's look to be about $100 more than the 231's. So why would chrysler put a more expensive case in a vehicle that lists quite a bit less than the autos? Is there a need for added transfer case size and/or strength w/ the 6 speeds? I don't think so. Maybe jeep had a bunch of these older 241's laying around and wanted to get rid of them. I do not know sales #'s, but the auto way out sells the manuals. So with the relatively small manual units being sold, maybe they thought of it as a perfect opportunity to put em on the manuals. So what do you guys think? Is chrysler just unloading old product?



You kinda hit the nail on the head
jeep probably agreed to X number of units and then changed their minds on the new grands
I dont know for sure but I think that the TJ sport with the six speed came with a np231

I was told once "the jeep Liberty is kinda like the sensored word step child from the merger of Chrysler and Dimler Benz
this is why it is inconsistant in what it comes with and why they changed so much in 5 years of production"
I think this may be correct


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 10, 2007 6:24 pm 
Offline
LOST Member
User avatar

Joined: Mon Aug 14, 2006 11:38 am
Posts: 493
Location: Highlands Ranch, Colorado
If anyone is interested in what the 241 guts look like, you can download the fiche file at:
http://colorado4wheel.com/manuals/Jeep/KJ/
(thanks sirsam)
and download your years parts manual. For the 2006 year, on page 394 it has the breakdown of the 241. (The 231 and 242 can be seen as well).
Stick a fork in this thread, it is done...

_________________
'06 3.7 sport 6 speed (long live manual tranny's)
tinted windows, cruise, midnight blue
Mopar roof rack
Royal Purple Synchromax in tranny
Royal Purple Maxgear in pumpkins
Full mopar skids, front diff collar
Future mods: Rock rails, B.F. Goodrich all terains. (In my dreams: Frankenlift)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 32 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com