It is currently Mon Nov 09, 2026 12:51 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 40 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: ARB Measurements
PostPosted: Tue Oct 16, 2007 11:55 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon May 22, 2006 6:28 pm
Posts: 3880
Location: Wichita/ Pittsburg, Kansas
How much does the ARB weigh?
How many bolts hold the bumper to the frame?
Does anyone have pics iof the inside of the ARB?
And can someone with an ARB get some measurements for me?
I need the length where the green lines are


Image

Thanks for all your help!

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 12:19 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
The ARB is about 85-90lbs without a winch and there is 10 bolts holding the subframe to the unibody and then 6 bolts holding the cover to the subframe(yes the ARB is 2 pieces).As far as measurements I'm to lazy to walk the 100ft to my Jeep for those.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 12:25 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Well I had to walk from my home office, all the way down stairs and out to the garage maybe 55 feet....total, :wink: it was rough!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 12:48 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon May 22, 2006 6:28 pm
Posts: 3880
Location: Wichita/ Pittsburg, Kansas
wow really?! 85# thats pretty heavy they could have made the whole thing out of 3/16"

thanks alot tom, my email is jsc7002@yahoo.com

anybody know the measurement for #1?

one more thing it looks lithe the bumper covers up the bottom part of the grille slots, does it?, and roughly how much does it cover?

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 1:04 pm 
Offline
LOST Addict
User avatar

Joined: Wed Nov 30, 2005 7:18 pm
Posts: 1059
Location: tejas de' round rock
on the 05 models, it covers about 2" on the bottom of the grill slots.

Image

_________________
2004.5 dodge qclb
smarty powered / isspros
2005 sivler lj
http://s303.photobucket.com/albums/nn13 ... ider_2008/


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 3:23 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
tommudd wrote:
somewhere I have the instructions get me an email address and I will try and find them and send to you they have some pics of the inside of the bumper. There is a frame work that you mount to the frame which is held on with 10 bolts, then the main bumper bolts on to that

#3 is 6.5
#4 is 17 to where it starts to turn
#2 is 8.25
#1 for got to measure :roll:

tom


number 1 is about 6 inches

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 5:06 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Wed Jun 13, 2007 5:04 pm
Posts: 1557
Location: Louisville, KY
Question:

Why all the messurments?

The box it comes in wont be big enough to put your wife in when she finds out what you have spent and threatens to...

I have seen too many CSI episodes.

Sorry for the rant.


But why the need for messurments?

_________________
'07 Ltd 3.7L, Black, OME HD's, OME shocks, Mopar Skids, AEV Bridgers w/ TPMS, Kumho KL78's, ARB Bumper, KC 130 Watters, Warn M8000 Winch, Rock Lizard Gecko Roof Basket KC 150 watters, Cobra 75WSX, 3 ft FireFly, RL Super Step Skinks


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 5:07 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Wed Jun 13, 2007 5:04 pm
Posts: 1557
Location: Louisville, KY
Jason,

what happened to your horn cover on the drivers side?

_________________
'07 Ltd 3.7L, Black, OME HD's, OME shocks, Mopar Skids, AEV Bridgers w/ TPMS, Kumho KL78's, ARB Bumper, KC 130 Watters, Warn M8000 Winch, Rock Lizard Gecko Roof Basket KC 150 watters, Cobra 75WSX, 3 ft FireFly, RL Super Step Skinks


Top
 Profile  
 
 Post subject: Re: ARB Measurements
PostPosted: Tue Oct 16, 2007 5:09 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Wed Jun 13, 2007 5:04 pm
Posts: 1557
Location: Louisville, KY
Who's ARB is this, Linex? Herculiner? what is it coverd in?

DETAILS PLEASE

Image

Thanks for all your help![/quote]

_________________
'07 Ltd 3.7L, Black, OME HD's, OME shocks, Mopar Skids, AEV Bridgers w/ TPMS, Kumho KL78's, ARB Bumper, KC 130 Watters, Warn M8000 Winch, Rock Lizard Gecko Roof Basket KC 150 watters, Cobra 75WSX, 3 ft FireFly, RL Super Step Skinks


Top
 Profile  
 
 Post subject: Re: ARB Measurements
PostPosted: Tue Oct 16, 2007 5:13 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
WoodysKJ wrote:
Who's ARB is this, Linex? Herculiner? what is it coverd in?

DETAILS PLEASE

Image

Thanks for all your help!
[/quote]A really bad Herculiner job.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 5:16 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Wed Jun 13, 2007 5:04 pm
Posts: 1557
Location: Louisville, KY
it looks like a pretty bad job, but who's

_________________
'07 Ltd 3.7L, Black, OME HD's, OME shocks, Mopar Skids, AEV Bridgers w/ TPMS, Kumho KL78's, ARB Bumper, KC 130 Watters, Warn M8000 Winch, Rock Lizard Gecko Roof Basket KC 150 watters, Cobra 75WSX, 3 ft FireFly, RL Super Step Skinks


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 5:17 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Wed Jun 13, 2007 5:04 pm
Posts: 1557
Location: Louisville, KY
how's my Gecko comming?

_________________
'07 Ltd 3.7L, Black, OME HD's, OME shocks, Mopar Skids, AEV Bridgers w/ TPMS, Kumho KL78's, ARB Bumper, KC 130 Watters, Warn M8000 Winch, Rock Lizard Gecko Roof Basket KC 150 watters, Cobra 75WSX, 3 ft FireFly, RL Super Step Skinks


Top
 Profile  
 
 Post subject: Re: ARB Measurements
PostPosted: Tue Oct 16, 2007 5:18 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
tjkj2002 wrote:
WoodysKJ wrote:
Who's ARB is this, Linex? Herculiner? what is it coverd in?

DETAILS PLEASE

Image

Thanks for all your help!
A really bad Herculiner job.[/quote]

you just said what I was thinking all along, man that stuff must add 50 lbs as thick as it looks :lol:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 5:20 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Wed Jun 13, 2007 5:04 pm
Posts: 1557
Location: Louisville, KY
As thick as it is, no wonder he needs accurate messuments from another bumper.

_________________
'07 Ltd 3.7L, Black, OME HD's, OME shocks, Mopar Skids, AEV Bridgers w/ TPMS, Kumho KL78's, ARB Bumper, KC 130 Watters, Warn M8000 Winch, Rock Lizard Gecko Roof Basket KC 150 watters, Cobra 75WSX, 3 ft FireFly, RL Super Step Skinks


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 5:22 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
WoodysKJ wrote:
As thick as it is, no wonder he needs accurate messuments from another bumper.


:lol: :lol: :-)r

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 5:54 pm 
Offline
LOST Addict
User avatar

Joined: Wed Nov 30, 2005 7:18 pm
Posts: 1059
Location: tejas de' round rock
WoodysKJ wrote:
Jason,

what happened to your horn cover on the drivers side?


i took it off. most of the time if there is a dumbarse driver, i just use my finger, not the horn.

:twisted:

_________________
2004.5 dodge qclb
smarty powered / isspros
2005 sivler lj
http://s303.photobucket.com/albums/nn13 ... ider_2008/


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 6:23 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon May 22, 2006 6:28 pm
Posts: 3880
Location: Wichita/ Pittsburg, Kansas
lol not my bumper, just one I found on cardomain

Im trying to get some measurements b/c im in the process of making my own bumper and I was wondering what the deminsions were to get some ideas

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 8:49 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Wed Jun 13, 2007 5:04 pm
Posts: 1557
Location: Louisville, KY
Ah, Just what I suspected Patent infringment.

Cool dude take pics, LOTS of PICS

_________________
'07 Ltd 3.7L, Black, OME HD's, OME shocks, Mopar Skids, AEV Bridgers w/ TPMS, Kumho KL78's, ARB Bumper, KC 130 Watters, Warn M8000 Winch, Rock Lizard Gecko Roof Basket KC 150 watters, Cobra 75WSX, 3 ft FireFly, RL Super Step Skinks


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 9:00 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon May 22, 2006 6:28 pm
Posts: 3880
Location: Wichita/ Pittsburg, Kansas
WoodysKJ wrote:
Ah, Just what I suspected Patent infringment.

Cool dude take pics, LOTS of PICS


:wink: what else is a poor college student to do? :lol: i will take alot of pics for ya tho, i think im gonna make it out of 3/16" kinda like christopher's or RL's but thicker and more like ARB's

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 16, 2007 10:47 pm 
Offline
LOST Newbie

Joined: Mon Jul 11, 2005 10:37 pm
Posts: 83
Location: Ontario, Canada
That's my KJ; and I do not have a cardomain account.

http://home.cogeco.ca/~chriscannon/JEEP ... erty13.jpg

_________________
08 Jeep Wrangler Unlimited Rubicon
Rescue Green
Teraflex 2.5in
Huskey Liners
Sill Guards
Grab Handles
Neoprene Grab Bar / Handle Wraps


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 40 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com