washer fluid resevior

bearmedic · **Posted:** Sat Oct 27, 2007 2:19 pm

im thinking bout pulling the washer fluid resevior and just fill a spray bottle with windex and and my nephew on the hood think dot will allow it???????

nah but seriously the darn thing is to low any body remove theirs? or modify it to be smaller?

tommudd · **Posted:** Sat Oct 27, 2007 2:28 pm

Lots of people have moved to one under the hood, using an overflow jug as the new one, several posts about doing it just look

carroll952 · **Posted:** Sat Oct 27, 2007 2:50 pm

This is what alot of folks have done. Nice writeup by Matt.

http://www.lostjeeps.com/forum/phpBB3/vie ... her#187707

Pablo · **Joined:** Thu Feb 02, 2006 10:06 pm **Posts:** 1201

I have a CRD, so there is no room to relocate this. I am considering buying an extra stock one from the junk yard and operating on it. I am not sure if the bottom of the design is long enough to permit this, but if it is a straight box for long enough , you could cut it in half across, insert the bottom of the box back into the top-- collapse it inward and then JB weld it back together, now much shorter. Then it should fit in the stock location with more clearance.

bearmedic · **Posted:** Sat Oct 27, 2007 6:42 pm

i htough bout doing that to but if i remember correctly the last time i had my bumper off the thing was an awkward shape. I even though bout taking a 3liter coke bottle and thowring it wiht the pump actually in teh bumpper and run a long hose lol .
drew

0311_DoC · **Posted:** Sat Oct 27, 2007 11:27 pm

Pablo wrote:

I have a CRD, so there is no room to relocate this. I am considering buying an extra stock one from the junk yard and operating on it. I am not sure if the bottom of the design is long enough to permit this, but if it is a straight box for long enough , you could cut it in half across, insert the bottom of the box back into the top-- collapse it inward and then JB weld it back together, now much shorter. Then it should fit in the stock location with more clearance.

well let us CRD folks know what you find out. im putting on my TR bumper next week and i know that bottle is going to be an eye sore. I gotta figure out something...

JHCRASH · **Posted:** Sat Oct 27, 2007 11:49 pm

bearmedic wrote:

i htough bout doing that to but if i remember correctly the last time i had my bumper off the thing was an awkward shape. I even though bout taking a 3liter coke bottle and thowring it wiht the pump actually in teh bumpper and run a long hose lol .
drew

HMMMMM. I wonder if this is something that could be done if one were to have the after market bottle in hand before the bumper was built :?:

bearmedic · **Posted:** Sun Oct 28, 2007 5:32 am

i dont see why you couldnt do it,

washer fluid resevior

Who is online