I have an 04 Renegade with about 70k on it. I'm finally ready to start changing some stuff and I wanted to start with a no-slip in the rear and a frankenlift. With the frankenlift, do you need to get Al's a-arms with the lift or is that something that you do after it settles, to see if you need them. Also, has anyone had any drive shaft issues with this lift. It is only 2.5" and the other lifts that are similar to that said that it wasn't necessary. I didn't see anything on the Frankenlift site that said that. Also, is there anything else that I need to be aware of with this lift? I'm also not any kind of mechanic and am hesitant to do anything that could result in stuff coming apart on the highway and killing me. Does anyone know of a garage/mechanic in the Pittsburgh area that they would recommend? Lastly, I was told by the dealership that I needed to have the breather tubes on the difs lengthened at my last inspection? I asked the guy what would be involved and he didn't really seem to know much, so I don't know if he was looking for more money or what. Any info on this and the difficulty?

I have not heard of any driveshaft issues on Frankenlifts and there are many out there being wheeled regularly.

As for breather tubes..... WTH are they talking about? If they are too short from the factory then they should be replacing them under warranty. Sounds fishy to me. If they are the normal length then they will be fine for all but deep water crossings and if you don't do a lot of water crossings it isn't an issue. It is easy to move the front one up by just disconnecting it from the bolt it is attached to under the batter tray and moving it up to and zip tying it to the battery tray, I was able to raise mine about 6-7" that way. I can get a pic of that if you need it.
I have always done that whenver installing a lift on a KJ as it is easy to do when you have the front end apart, batter tray out, etc to install the lift.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal

Some folks over your way, maybe you can get a lift party together! I have done 4 lifts so far here at my place, and its pretty easy if you have a jack, stands and of course the proper tools. If I can be of any help just let me know. Jon (jerbacher) lives in the Kent/Akron area and has helped on a lift and some others like I said over that way. Pbrug, lives in Pittsburgh area and he did his own lift as well. Ask around, a lot cheaper than paying a shop yo do it! Or just haul your junk over here and we can do it in a few hours! Thats how Jon got his training!!
You dont need the a arms as many have lifts and not the arms.

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

like we are goping to do with my lift when i get it PARTY!!!

_________________
i have a 2004 jeep liberty, i am trying to get it to be the biggest and best around.

aftermarket rims
home made roof light bar
front grill lights
235/75/16 AT
COLD AIR INTAKE

Here is a couple of links about extending your breathers. You don’t need this until you find yourself in water deeper that you expected – then it is too late. Even if your are not sure if you got water in any of the four, you will need to change the fluids to be sure any water is out. There are write-ups on here where guys lost bearings when they didn’t know they had gotten water in the dif.

http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=7229
http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=22690

_________________
Ed

2006 4X4
Full Jeep skids
Rock Lizard Super Sliders
OME Spring Lift
Al's A-Arms and Quick Disconnects
Cobra 75 WXST and Fire Stick
Garmin 580 GPS

LOST #EH075243
http://www.cardomain.com/ride/2934108

My friend has a shop in the South Hills area (Baldwin). He does all the mods to my Libby and installed my FrankinLift a couple of years ago. No problems with it yet but i would suggest Al's A-arms, I changed my upper and lower ball joints also. There really is nothing to worry about with the lift as long as you go back over it once it settles. You will love having it.

_________________
Interco Iroks - Tires for Sale
Jeep is SOLD!

You keep on having lift parties and you may pass Clint on installed lifts.

I would suggest against getting the power-trax unless you know whats youre getting into. Its ok for someone that goes offroad alot but its not the best thing in the world for a DD. It pops, locks up alot in turns, adds alot of slake to the drive-train.. Ive had it for a year and all seems ok but Im ready for it to get out of my diff.

Im looking into getting a Detroit TT sometime or another. It costs about the same but installation is much more involved as you must take the entire carrier out.

Al's arms are not needed but they are alot better than the stock ones. You can grease them, it makes alignments better with a lift, and it takes some angle off the balljoint. If you can afford them without loosing food at the table then I would get them some time or another. Probably before you align it just to save some money since youve got to get an alignment after getting the arms too.

If the breathers are stock then that guy doesnt know what he is talking about.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster

Never mind, I was going to ask you to post the pic, but then I see there are threads that have excellent write-ups on the procedure!

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.

Frankies are easy to install
remove your current struts assemblies and install the new ones
rear is no harder than changing shocks

DO NOT waste your money on a power trax
I some how broke 2 on back to back trail rides
got one in
go on a trail ride ,it broke
got that one replaced under warranty
go on a trail ride and the new one broke
Got a Detroit locker now and it has better road manners than the power trax and it did not break on the first trail ride
The reason I think the Detroit has better road manners is because you know what it is going to do
the power trax may or may not do some thing

Dont worry about the breathers
They are higher than your lower door seal
and I never go in water that can come in to the Jeep