a rocky-road tranny skid. Anyone know where it is?

Thanks in advance!
BlueFreedom

_________________
BlueFreedom
2003 Liberty • Freedom Edition • Atlantic Blue/Graphite trim
Command Trac, Trak-Lok, Rusty's 2.5" Coil Lift, Full Skids, Rocky Road Steprails, Moabs and General Grabber At2s
Alpine head unit, Alpine Amps (40 x 4 + 500 x 1) 4 polk db650s and two 10" Polk subs.

I used to have a write up on the install..
apparently that is one of the few pics I never saved..
If you already have purchased the skid, it is fairly easy to install..
If you have not purchased the skid yet, do not buy the RRO..
Get the one from Boulder Bars if they have a version for your year..

I know you need to drill a "hole" on the drivers side of the
stock engine skid to get it to fit, other than that it is just 4 bolts..

Assuming that you have the skid row product that RRO sells, all that is needed is to enlarge the bolt hole of the factory dif skid (driver's side, rear). The factor skid plate is angled to follow the contour of the frame. The RRO skid slightly changes the angle that the bolt goes through the hole in the frame. The is why you need to enlarge the hole in the factory skid. You should have a longer bold and nut for this hole.

_________________
JacksJeep
Lifted, Locked and Ready to Wheel