ok. getting some custom rocker bars done up and wanted to know what you all think? it was pretty much my own design, not to say thier are not others like it, and are willing to make more if interested!... thinking 200$ plus shipping but not set in stone yet...pics will be up later

_________________
02 Jeep TJ Sahara, 33's locked up front
03 SAS KJ 0n 35ish boggers(Sold )
Petersens 4wheel: http://www.4wheeloffroad.com/featuredve ... index.html

Are they just the sliders themselves or do they have a step as well? I wish I could make this stuff myself!

_________________
-Gavin
2006 4x4 Sport ~ Dark Khaki
2.5" Rockfather II
Tow Hooks ~ HH Rear Hitch
Hella 500's

gwip Design

it has a lower slider for the pinch weld along the bottom then comes out and up...about 3"s, just a little, below the doors to protect the actual rocker panel... they look like the super sliders from rocky mountain...

_________________
02 Jeep TJ Sahara, 33's locked up front
03 SAS KJ 0n 35ish boggers(Sold )
Petersens 4wheel: http://www.4wheeloffroad.com/featuredve ... index.html

this is rough...real pics up tomarrow
IMG]http://i249.photobucket.com/albums/gg234/ohv_kj/bar.jpg[/IMG]

_________________
02 Jeep TJ Sahara, 33's locked up front
03 SAS KJ 0n 35ish boggers(Sold )
Petersens 4wheel: http://www.4wheeloffroad.com/featuredve ... index.html

Linky no worky
just looks like a bunch of random numbers and letters

not sure if that worked? try these two
IMG]http://i249.photobucket.com/albums/gg234/ohv_kj/bar.jpg[/I

IMG]http://i249.photobucket.com/albums/gg234/ohv_kj/bar.jpg[/IMG]

_________________
02 Jeep TJ Sahara, 33's locked up front
03 SAS KJ 0n 35ish boggers(Sold )
Petersens 4wheel: http://www.4wheeloffroad.com/featuredve ... index.html

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/

Sure would like to see the pic of what it looks like on the Jeep.

_________________
05 Liberty 4x4, Atlantic Blue
Extended Breathers
3/4 Mopar Skids
OME Lift, 245/75/16 General Grabbers AT2, ProComp Extreme Alloys 7189
Mopar Tow Hooks

Me too, please get us some!!!!!

_________________
STEVE
L.O.S.T. #075255
Patriot Blue 2002 Sport, OME Lift, 245/75/16 BFG AT's on Cragar Soft 8's, Black Widow Basket, Magnaflow Exhaust, Sirius Radio, Alpine Blackbird GPS, Silverstar Headlight Bulbs, Homemade Cross Rails, Debadged, Amsoil Bumper-to-Bumper, More Mods to Come...

this is the befor pics...i am waiting for them to dry before i put them on!




will have the after pics up tomarrow...would of been done to day but my gas run out on my welder and to late to get more...

_________________
02 Jeep TJ Sahara, 33's locked up front
03 SAS KJ 0n 35ish boggers(Sold )
Petersens 4wheel: http://www.4wheeloffroad.com/featuredve ... index.html

What kind of rack is that? Like the way the front slopes back

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

It's my own design, if i get enough interest i will make then ship...200$ +shiping...it will come raw metal so you can paint it the color you want...i am welding mine straight on the frame, you can do the same unless you want a bolt on? also you would need to notch to areas out of the lower pinch weld that goes to the frame so it will sit flush...

_________________
02 Jeep TJ Sahara, 33's locked up front
03 SAS KJ 0n 35ish boggers(Sold )
Petersens 4wheel: http://www.4wheeloffroad.com/featuredve ... index.html

i have a friend that wants the xterra rack for his lib. that looks alot like it. i think he may be into this. ill let him know!

we are staying w/ the option of 200$...tell me what you think? would rather ship ready for weld but if i get enough ppl wanting brackets i can make them...


front view

back view



no groud clearence is lost and i think the look pretty cool...black end caps will be on as well!

_________________
02 Jeep TJ Sahara, 33's locked up front
03 SAS KJ 0n 35ish boggers(Sold )
Petersens 4wheel: http://www.4wheeloffroad.com/featuredve ... index.html

are you going to weld the caps on or just use plastics? they look great!

looks great! they kinda look like sini's he made some and they are awesome!

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/

look good. i might have used thicker pipe. would be alot easier to make and cheaper than the ones i made thats for sure. good job

_________________
cactus green 03 sport 3.7
Rusty's coil lift w/ Rancho RSX shocks & 3 ring clevis
custom skids and rock rails ; Surco roof rack w/ hi lift mounted
pioneer cd/aux with Zune mounted on dash; uniden cb with 4' K40 antenna
xeon lights; grill inserts; black wheels; 245/75/16s MTRs
#1281 http://www.cardomain.com/ride/2967585/1

here are sini's

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/

i liked that idea but two things were un-easy w/ me...first to bend the tube would up the price...also the super sliders i was talking about previously l;ook just like that and i didn't want to copy a design...not sure if thier is any copy rights to things like it? also i would be conenecting, later on, to my tube bumpers...like a exo skeleton but not a roll cage...thanx for the comments though...

_________________
02 Jeep TJ Sahara, 33's locked up front
03 SAS KJ 0n 35ish boggers(Sold )
Petersens 4wheel: http://www.4wheeloffroad.com/featuredve ... index.html

sini didnt bend his, he cut welded grinded, which is what Im going to do on my rock rails when I finish my rear bumper, it looks like a 45* cut

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/