It is currently Mon Nov 02, 2026 7:08 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: SEGR , Provent Mod, Where To Get? New Here
PostPosted: Thu Feb 28, 2008 1:29 am 
Offline
LOST Newbie
User avatar

Joined: Mon Feb 25, 2008 5:32 pm
Posts: 81
Location: Weatherly Pa. U.S.A
Ok, I've been reading threads on segr and mann provent but, i dunno where to get it. We just bought a 2005 libby , and I want to start with these mods to correct DC & Epa mistakes. Also just before pickin it up(we bought used from dealer with 25k) they called and said after fillin it up the glo plug light went on. I've gotten the VIP report and it stated that the libby got a plug module round 12k. They said it needs a plug, well i dunno, shouldn't they replace all plugs? O well i guess if they're gonna go it'll be in the 70k warr. It's had all the updates Including F-37(UGGGH)

I n one's opinion, what mods should be done to keep it tight and reliable, I love to modout, but my wife is gonna drive this, you get the picture.

Any feedback will be appreciated



2002 Ram Cummins H.O. 6 Sp
2005 Liberty CRD Stock
70 Buick GS455
72 Buick GS455
65 Chevy K-10 292
Diesel Locomotive Tech
Automotive Equipment Engineer


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 28, 2008 2:16 am 
Offline
LOST Junkie

Joined: Sat Dec 22, 2007 3:40 pm
Posts: 635
Location: Colorado
Welcome.

Go to the SEGR get on it now list cause LOCO is ordering them soon...probably within a week so you have to get on it ASAP.

as for the mods, all that you listed are good with the addition of the lift pump.

the mann provent is around $250 i think, bought online. you can google it, i made a contraption that will work just as good for about $30.

There are a few threads on here about the lift pump, titled "it's 10pm where's your lift pump" and another that "it is 10:01pm * ".

some unplug the fuel heater on the filter head until the lift pump is added, the plug on the drivers side (check for leaks at the plug they melt sometimes).

The SEGR you have to solder together, UFO is doing it for a price, his thread is titled "SEGR kit Building any intrest" or something very close"

all of the threads mentioned are within the first 3 pages of posts i believe.

Happy modding

_________________
Trevor

'05 Limited CRD Inferno Red Pearl Coat
Home made provent installed @ 35443, SEGR installed @ 35466, Fumoto valve @ 37500, trans and transfer case skid, In tank pump installed @ 43500, Suncoast TC & Transgo Shift Kit @ 44730, EGT, Boost, Trans temp gauges, Samco hoses, Rebuilt Trans w/ HD454RFE kit @ 56K, Inmotion Stage 2 @ 56K


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 28, 2008 2:45 am 
Offline
LOST Member

Joined: Thu May 18, 2006 12:42 pm
Posts: 190
Location: West, IN
05InfernoCRDL gave some good mods...

05infernoCRDL wrote:
Welcome.

the mann provent is around $250 i think, bought online. you can google it, i made a contraption that will work just as good for about $30.



You can get the Mann Provent 200 for ~$130 online... just google it, there are multiple providers.

_________________
Steel Blue 07 Jeep Grand Cherokee CRD :JEEPIN:
Mopar Skid Plates/GDE Programmer/Fumoto Oil Valve
80K+ miles & still smiling :D

Sold: Silver 06 Jeep Liberty Sport CRD


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 28, 2008 10:43 am 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jan 31, 2006 12:19 pm
Posts: 376
Location: Rio Rancho, NM
SEGR sign up list here...

http://www.lostjeeps.com/forum/phpBB3/vie ... 514#305514

_________________
2005 CRD Limited
1.5/2.0 Daystar Lift
V6 Airbox
SEGR ala TurboTim
255/70/16 Big O on Rubis minor trimming required
87k+ miles=3 factory TC's, 2 front pumps, 1 turbo, & drivers side wheel bearing/hub
Suncoast TC and Transgo Snake oil-41k
New Front Drive shaft-30K
Stage 2 InMotion Tune-54k, makes me go :)
B&M Tranny Cooler


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 28, 2008 11:06 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Dec 29, 2005 9:59 pm
Posts: 5171
Location: Austin, TX
provent's about $150
http://www.airnowsupply.com/tdi.htm

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 28, 2008 12:14 pm 
Offline
LOST Member

Joined: Mon Feb 18, 2008 2:59 pm
Posts: 137
Location: SJ, CA
Hi, ! how do you get a "VIP" ? report ?
I called jeep yesterday and they said they wont give that to me.

thanks !

_________________
-------------------------
Liberty CRD 2005
50K miles
ORM / EHM /facet lift pump
Suncoast TC and still shudders...
straight pipe.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 28, 2008 12:38 pm 
Offline
LOST Junkie

Joined: Sat Dec 22, 2007 3:40 pm
Posts: 635
Location: Colorado
ATXKJ wrote:


i could never find that site when i looked.. that is alot better of a price but still alot IMHO.

_________________
Trevor

'05 Limited CRD Inferno Red Pearl Coat
Home made provent installed @ 35443, SEGR installed @ 35466, Fumoto valve @ 37500, trans and transfer case skid, In tank pump installed @ 43500, Suncoast TC & Transgo Shift Kit @ 44730, EGT, Boost, Trans temp gauges, Samco hoses, Rebuilt Trans w/ HD454RFE kit @ 56K, Inmotion Stage 2 @ 56K


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 28, 2008 5:10 pm 
Offline
LOST Member

Joined: Thu May 18, 2006 12:42 pm
Posts: 190
Location: West, IN
ATXKJ wrote:


Check out http://www.republicsales.com/products/f ... rovent.php

They have them for $129.99, and if the claim is real on the front page, free shipping too.

Anyway, I hope that this helps!

_________________
Steel Blue 07 Jeep Grand Cherokee CRD :JEEPIN:
Mopar Skid Plates/GDE Programmer/Fumoto Oil Valve
80K+ miles & still smiling :D

Sold: Silver 06 Jeep Liberty Sport CRD


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 28, 2008 5:16 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Dec 29, 2005 9:59 pm
Posts: 5171
Location: Austin, TX
007husky wrote:
Hi, ! how do you get a "VIP" ? report ?
I called jeep yesterday and they said they wont give that to me.

thanks !


Someone else mentioned that but said you have to be friends with the dealer - it's not intended to be a customer report - it's for the dealership.

(I remember air supply now - that's where I bought might - I had forgotten that someone had found a $130 version)

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 29, 2008 2:19 am 
Offline
LOST Newbie
User avatar

Joined: Mon Feb 25, 2008 5:32 pm
Posts: 81
Location: Weatherly Pa. U.S.A
Thanks Guys Or Gals

I just picked it up tonight, and liking the little tractor more and more on my way home. I am so glad that this site is here, and that everybody has some info to give, I'm shure my CRD and I will be able to add somthin here soon

I went over it with a fine tooth comb and found the fuel heater leaking, and told them to replace or find another buyer other that that she ran fine, no 55MPH shudder, and i beat on it for awhile, lol he threw me the keys and said take it for a spin and I'll see ya when I see ya. So I put it through the ringer, hey it does nice line locks :wink: .

As for the Vip report. I was very persistant , basically again told him I wanted it, or find another buyer. There's allways someone at a dealer you can make nice with to get what you need. Sometimes it takes the right guy at the right time, when you have the right case of beer to offer :twisted:


Thanks Everyone


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com