Why does finding a lift have to be so confusing!!

Jeepjeepster · **Posted:** Mon Nov 14, 2005 5:34 pm

All i want is a simple 2in lift!! I dont want a 2.5in lift. With that said, if i get a rustys full 2.5in suspension lift, would that be anydifferent than getting the rustys 2in springs? Are those the same springs they use in the 2.5in lift or what?

Heres the Full suspension lift.
http://rustysoffroad.com/Merchant2/merc ... sus_kj_kit

And here is the 2in front and rear springs im talking about.
https://rustysoffroad.com/Merchant2/mer ... sus_kj_par

Someone plz help me!! im dieing to get a good 2in lift!

Guyute1210 · **Posted:** Mon Nov 14, 2005 5:49 pm

Quote:

im dieing to get a good 2in lift!

Why not get a good or great 2.5" lift?

Jeepjeepster · **Posted:** Mon Nov 14, 2005 5:52 pm

i dont want that much lift, im worried about the cv's and things, 2in is as high as i want.

boxhead · **Joined:** Fri Jul 08, 2005 11:14 pm **Posts:** 186

Get the RevTek. I had it on my 2003 Libby anr liked it fine. It's 2". I'm going higher on my CRD though.

krazz1e · **Posted:** Mon Nov 14, 2005 7:38 pm

fyi, the rusty full kit is 2.5" post-lowered. So in reality you are only get 1.5" off a stock '02.

meaning it's a perfect lift for your '04 as it won't bind your cv joints. be done and get rusty's.

Jeepjeepster · **Posted:** Mon Nov 14, 2005 8:56 pm

boxhead wrote:

Get the RevTek. I had it on my 2003 Libby anr liked it fine. It's 2". I'm going higher on my CRD though.

where did u buy it from? I cant seem to find a place to get it/ look at it.

Does anyone have any pics of there cv angles with the rustys lift?

Edwin · **Posted:** Mon Nov 14, 2005 10:18 pm

Jeepjeepster wrote:

All i want is a simple 2in lift!! I dont want a 2.5in lift. With that said, if i get a rustys full 2.5in suspension lift, would that be anydifferent than getting the rustys 2in springs? Are those the same springs they use in the 2.5in lift or what?

Heres the Full suspension lift.
http://rustysoffroad.com/Merchant2/merc ... sus_kj_kit

And here is the 2in front and rear springs im talking about.
https://rustysoffroad.com/Merchant2/mer ... sus_kj_par

Someone plz help me!! im dieing to get a good 2in lift!

Get the OME HD from All-J. :wink:

Steakgoddess · **Posted:** Mon Nov 14, 2005 10:24 pm

Don't know if this is good enough, but here is what I have tonight on my computer. This picture was taken right after the Rusty's was put on.

priell3 · **Posted:** Mon Nov 14, 2005 10:26 pm

This is what you're looking for 4WD Hardware 2" Lift

JoeJeeper and myself both have it installed.

Jeepjeepster · **Posted:** Mon Nov 14, 2005 11:15 pm

Do you tow priell3? I need to know how they do with towing. I need something that will not sag while towing. And does it raise the rear of the jeep up. I like having the rear higher than the front. Looks like thay are about the same in the pic, maybe i could leave the strut spacer out to keep the front down?

priell3 · **Posted:** Mon Nov 14, 2005 11:21 pm

Jeepjeepster wrote:

Do you tow priell3? I need to know how they do with towing. I need something that will not sag while towing. And does it raise the rear of the jeep up. I like having the rear higher than the front. Looks like thay are about the same in the pic, maybe i could leave the strut spacer out to keep the front down?

I don't tow with my KJ. The kit does raise the rear. The top of my rear bumper went up 3 inches.

Jeepjeepster · **Posted:** Mon Nov 14, 2005 11:27 pm

well yea, I just wanted to make sure it doesnt raise the front 3in and the rear 2.5in to level the jeep out. D you know what i mean? Some people like having the front the same level as the rear, but i dont, i like the stock look. The rear higher than the front. Thanks for the info though. I sent you a long pm too.

Why does finding a lift have to be so confusing!!

Who is online