Hey guys,
I know that someone linked a while back the instructions on how to install the Mopar Light bar, I was hoping someone could link it to me. I just ordered the kit today and will be putting it on over the weekend

Thanks!
Steve

_________________
Home of the JEEP!
03 Freedom Edition
Brush Guard, Rock/Skid Guards, Tail light Guards, Mopar Roof Lights More to come

and youre not going to invite me to watch? We will be doing one here real soon on Chris' . Did you get a new one?

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

_________________
-Jon-
02 Jeep Liberty - LOST Trail Tested Edition - sold
09 VW Tiguan 4motion - current

yeah, brand new Mopar kit. Should be getting it tomorrow I'll Post some pics of the install and let everyone know how it goes.

_________________
Home of the JEEP!
03 Freedom Edition
Brush Guard, Rock/Skid Guards, Tail light Guards, Mopar Roof Lights More to come

Another member sent me this link....

Tom, you should probably look at this too!

http://www.jeepkj.com/forum/showthread.php?t=34988

_________________
2000 Cherokee Trail Hawk
3.5" R.E Superflex Lift, R.E Quick Disconnects, R.E Rear Driveshaft, SYE, OME Steering Stabilizer, ARB Diff Covers, JW Speaker Black Heated Headlights, Mickey Thompson 16x8 wheels, 245/75r16 Toyo Open Country AT's, 15 lb Powertank

2003 KJ Sport (BLACK) 230,000+Miles (Decommissioned)

good pictures and write up

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

the only thing i did different was taped a line of paper around the whole area where i was drilling the holes so metal shavings didnt go every (in the cawl) and prematurely create rust. i dont know how necessary this was but it made me feel better. and i used a nutzert tool (big squeeze Y-shaped thing) instead of the ratchet tool they give you. that was like night and day.

_________________
2006 Renegade. Completely stock.

I have plenty of wide tape ( left from hood hole cutting) so when we do Chris' we will just tape everything off. Cut so many holes in vehicles over the last thirty years its almost....well almost no fun anymore

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Heres a pic from after the install. It was not very hard to do. the directions that come with the kit as well as the one that was posted in here are very helpful. I sealed the hell outta the holes and thank god there have been no leaks. Total time to be install was 2.5 hrs.

_________________
Home of the JEEP!
03 Freedom Edition
Brush Guard, Rock/Skid Guards, Tail light Guards, Mopar Roof Lights More to come

Nice work! That's one of my plans for the future as well. Those write-ups will definately come in handy!

_________________
Jason
'04 Red KJ Limited, OME HD/Rancho lift, 3 ring clevis, K&N drop-in, 255/70 Grabber AT2s, Flow Delta 40
"Stand on it son!"
Coming sooner or later- wheels, light bar, bull bar, skids, front recovery point, etc...