What are yall doing for aftermarket stereo setups?

dieselndixie · **Joined:** Tue Apr 15, 2008 1:38 pm **Posts:** 17

Post pics if you can, I will post once I get everything in.
(starting from factory with blown front speaker)
I just ordered this:
130DEHP500 Pioneer DEH-P5000UB CD Receiver
1086022SI Infinity Reference 6022si 6-1/2"/6-3/4" Shallow 2-way Speakers Front and Rear

Considering an Infinity Basslink...anybody used one? I had (1) RFosgate punch stage 3 and a 200watt RF amp brdiged in my last jeep, and I just dont need that level of bass this time around...

Jeep4me99 · **Posted:** Sun Apr 20, 2008 12:10 am

This is how I roll

You should have posted this in the electronics section young grasshopper.

WURRDDDDDDDDDDDDD!

RAYMAN975 · **Posted:** Sun Apr 20, 2008 1:16 am

i have an alpine 9885, i think, headunit, 4 alpine type-s speakers, alpine type-r sub and an alpine m-850 amp, i think its around $1300 so far lol. ill try to get pics

Frostednutz · **Posted:** Sun Apr 20, 2008 3:33 am

soon to be old setup as soon as i can find a buyer...

and of course the upgraded electrical part. 0/1 gauge power/grounds, custom 200 amp alternator, deep cycle battery

soon to be replaced by 20 cub ft of death!

Sport · **Posted:** Sun Apr 20, 2008 8:42 am

RAYMAN975 wrote:

i have an alpine 9885, i think, headunit, 4 alpine type-s speakers, alpine type-r sub and an alpine m-850 amp, i think its around $1300 so far lol. ill try to get pics

nice, I am an Alpine fan myself.

JL Rockies · **Posted:** Sun Apr 20, 2008 9:36 am

My sig says it all

Jeepjeepster · **Posted:** Sun Apr 20, 2008 1:19 pm

-500watt MTX AMP(2ohm)
-12" 7500 MTX Sub in sledge hammer box
-Kinda old Pioneer Premier HD
-Stock from speakers/tweeters
-MTX speakers in the rear doors

I would like to get a 4 channel amp with some Pioneer components for the front doors and dash but thats $$. I need a new HU too.

SoDakJeep · **Posted:** Sun Apr 20, 2008 2:50 pm

mine is just 2 12 in sony xplodes and a 800w sony amp with the factory indash 6 disc. Its plenty loud for what I litsen so and it can rattle you around if you turn it up.

06LIB · **Posted:** Sun Apr 20, 2008 3:11 pm

factory nav radio, JL signal processor, infinity 6.5's in doors, 2 farad cap, 1 power acoutik amp for the doors and dash ,and another power acoutik amp for the rock fos shallow subs..... :wink:

Endurance · **Posted:** Sun Apr 20, 2008 4:47 pm

ELECTRONIC section

hardhittinz · **Joined:** Tue Jul 03, 2007 10:44 pm **Posts:** 195

jvc head unit,delphi color xm receiver,JL audio 1800d amp with 4 gauge stinger wire driving 3 - 10inch RF hx2's in ported box

tjkoen01 · **Posted:** Tue Apr 22, 2008 10:20 am

alpine, alpine, alpine and alpine.
CDA-9885 head unit with xm and ipod
type s components up front driven by MRP-T220 amp
type r coaxial in the rear doors
old alpine 12" sub driven by MRD-M300

jinstall · **Posted:** Tue Apr 22, 2008 1:21 pm

I will have a link to My Space for mine in a few minutes.

hardhittinz · **Joined:** Tue Jul 03, 2007 10:44 pm **Posts:** 195

hey tjkoen01 my dad has that same mrp-t220 amp but he has it bridged runnin a 10inch bazooka

tjkoen01 · **Posted:** Wed Apr 23, 2008 12:40 pm

hardhittinz wrote:

hey tjkoen01 my dad has that same mrp-t220 amp but he has it bridged runnin a 10inch bazooka

yeah, one of my previous roommates had one that he ran in bridged mode to drive a 10" in his GTI. I found this one on ebay for $20 and spent $8 to fix it. The main reason I got this amp is because it could fit it under the driver's seat....even fabbed up some brackets to mount it. It really makes the component speakers come alive.

hyedipin · **Joined:** Thu May 11, 2006 10:20 am **Posts:** 1667

dieselndixie wrote:

Post pics if you can, I will post once I get everything in.
(starting from factory with blown front speaker)
I just ordered this:
130DEHP500 Pioneer DEH-P5000UB CD Receiver
1086022SI Infinity Reference 6022si 6-1/2"/6-3/4" Shallow 2-way Speakers Front and Rear

hey there. Are you planning on getting any amps for the speakers or will they be powered by the receiver?
I always thought about upgrading my speakers, but never had the guts since I was not sure if the STOCK AMPS in the premium setup were more or less powerful than my Kenwood head unit.. I just didn't want to end up with weaker sound if there was a difference.. but could never find out what the stock amp specs were.. so I stuck with the stock setup, with only a ** kenwood HU because I didn't want the hassle of hooking up new amps, etc..

dieselndixie · **Joined:** Tue Apr 15, 2008 1:38 pm **Posts:** 17

well, got he unit installed....WHAT A PAIN!!!

I had the infinity system with crossovers and didnt konw that before i started.

It was a wiring nightmare, but not tooo bad i guess...just took alot of trial and error.

anyway, anyone need my old stuff. factory head unit, both rears, one front (drivers side) The passenger side speaker is blown, but the crossover is fine.

lemme know.

pics of the new rig coming...i love my pioneer head unit...the way it controls my ipod is awesome...i dont konw how i lived without having my ipod in there. it also takes USB keys!

xturboexpress · **Joined:** Wed Jan 09, 2008 1:43 am **Posts:** 75

See tha sig!

Also buying infinitys for the front doors as my stock ones have been blown for a while. Debating on Kappa 6.75 2-ways or components. Not sure yet.

What are yall doing for aftermarket stereo setups?

Who is online