Need new rear shocks. Rancho or OME?

jsc7002 · **Posted:** Fri Jun 06, 2008 7:10 pm

I have some hockey pucks if anyone needs some, just send me a PM, I bought 12 then I relized that I dont need them :roll:

06Dkhaki · **Posted:** Fri Jun 06, 2008 7:31 pm

Don't know what I did, but the search function just worked now. Looks like I need some bumpstops. jsc7002, I would take you up on that offer, but I think shipping would cost me more than just going to my local sports store and picking up 6 hockey pucks. No shortage of them here in Portland.

LostEddie · **Posted:** Fri Jun 06, 2008 7:48 pm

You might want to start a new thread “ How much bumpstop to add”?

I was told that with a 2 -2.5 lift and 145/75s I will only need 1 puck per side.

Also there are write-ups on here where folks buy a cheep rubber mallet and cut the ends off to make the two rear bump stop additions. $1.99 at Harbor Freight http://www.harborfreight.com/cpi/ctaf/D ... mber=39647

tjkj2002 · **Posted:** Fri Jun 06, 2008 7:51 pm

LostEddie wrote:

You might want to start a new thread “ How much bumpstop to add”?

I was told that with a 2 -2.5 lift and 145/75s I will only need 1 puck per side.

Also there are write-ups on here where folks buy a cheep rubber mallet and cut the ends off to make the two rear bump stop additions. $1.99 at Harbor Freight http://www.harborfreight.com/cpi/ctaf/D ... mber=39647

2.5" of lift = 2.5" extra/added bumbstop.

jsc7002 · **Posted:** Fri Jun 06, 2008 7:52 pm

LostEddie wrote:

You might want to start a new thread “ How much bumpstop to add”?

I was told that with a 2 -2.5 lift and 145/75s I will only need 1 puck per side.

Also there are write-ups on here where folks buy a cheep rubber mallet and cut the ends off to make the two rear bump stop additions. $1.99 at Harbor Freight http://www.harborfreight.com/cpi/ctaf/D ... mber=39647

ya but then $7 for shipping, I was told you need 1 hockey puck for each inch of lift, so for a 3" lift 3 hockey pucks

Need new rear shocks. Rancho or OME?

Who is online