I have an 06 Sport 4X4 and am considering a front hitch but cannot see where it would attach to the frame. Has anyone done this to an 06 and if so do you have pictures?

they dont make them any more so your gonna need to find a shop that can make you one or find a good used one

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/

there are two "framerails" that go into the bumper itself. You can see three holes where the OEM tow hooks bolt to...the two outermost holes on each side is where the hitch bolts, and on mine I had to drill two holes further back.

Mine's an '02, but it's the same for all years IIRC. Good luck finding a front hitch. Landy fabricated a few several months ago.

Instructions...I believe they were stated to be for 02 to 07... http://assets.iqestores.com/hitch_instr ... N65042.pdf

_________________
Brian, Blue KJ in PA
LOST#99, Mid-Atlantic LOST
Blue 2003 KJ Sport

RL Super Skinks