It is currently Sun Nov 01, 2026 6:33 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: OME lift installation instructions?
PostPosted: Mon Jun 09, 2008 3:29 pm 
Offline
LOST Member
User avatar

Joined: Mon Nov 12, 2007 9:22 pm
Posts: 281
Location: the beach, nj
so I'm getting my OME MD lift installed tomorrow(tues) :D by the best in town (folks travel quite a distance just to get their suspensions installed & worked on by this place and anyway i dont have the room or tools or manpower to do it here myself) and so when i went to visit them, all was good after going over my hardware with one of the techs except he asked if it came with instructions. (what!..yeah i know, i know, it sounds like wow..they shouldn't have to ask for instructions,ha..hah) so i told him no, instructions were not provided, and then they agreed that they dont need them they just thought they'd ask since they usually deal with rough country and skyjacker. but THEN i got to thinking.....maybe there might be a certain sequence or specifics(such as washer placement, etc) for installing this particular lift kit on a KJ which wouldn't necessarily be the case for any other vehicle :shock: Anyone have access to the "official" instructions for this lift kit if there are in fact any 'actual instructions?' If not, is there anything that I should point out to them regarding install that they might miss? - thanks!

p.s. cant wait for this lift..its been a long time coming!

_________________
Black '03 Renegade
custom 3"OME MD lift w/strut plates
245/70/16 General Grabber AT2s
Spidertrax 1.25" wheel spacers
K&N Intake, Flowmaster 50 Delta Flow
Al's a-arms gen4.5, Moog LBJs
custom fishing pole roof rack
front hooks & dual hitch receivers
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 09, 2008 4:04 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
No real instructions,pretty self explanitory.Just make sure the top strut plate washer and nut get back in the correct order(strut plate,then washer,then nut) and make sure the nut get torqued properly.Torque the sway bar end link bolts and remove rear sway bar for easier rear coil install.That's about it.Oh and a ratchet strap really helps align the lower clevis to the LCA to get that lower bolt in.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 09, 2008 4:45 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
like tjkj said if they watch how they take each one apart and put them back the same way, they should not have a problem at all

Good Luck !

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 09, 2008 5:21 pm 
Offline
Jeep-O-Caching
Jeep-O-Caching
User avatar

Joined: Fri Oct 05, 2007 6:41 am
Posts: 1815
Location: Northern Virginia
dying to see the pics! this is the lift size/combo I want as well.

_________________
Jason
----------
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 09, 2008 9:15 pm 
Offline
LOST Addict
User avatar

Joined: Thu Jul 07, 2005 8:25 pm
Posts: 1361
Location: Grafton, Ohio
Just tell them to change the springs and shocks. If they need directions for that, take it somewhere else!
Tom's garage is always open and he will work for food. :lol:

_________________
Slightly modified Lt. Khaki 3.7 2004 LTD 4X4. Purchased new 8/6/03.
What I don't have....A Mag light mounted to my seat.
Original Old L.O.S.T. #000354

Nick's Pics & Mods click here: http://www.cardomain.com/ride/531173
http://www.survivaltopics.com/forums/


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 09, 2008 9:45 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
KJ04 wrote:
Just tell them to change the springs and shocks. If they need directions for that, take it somewhere else!
Tom's garage is always open and he will work for food. :lol:


food....clothes....spare parts.....whatever :wink: even cash :wink:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 09, 2008 9:56 pm 
Offline
LOST Member
User avatar

Joined: Mon Nov 12, 2007 9:22 pm
Posts: 281
Location: the beach, nj
i dropped her off tonight :( all should be good tho..they're certified suspension specialists :wink: even still...im surprising them tomorrow around noon to check in!

_________________
Black '03 Renegade
custom 3"OME MD lift w/strut plates
245/70/16 General Grabber AT2s
Spidertrax 1.25" wheel spacers
K&N Intake, Flowmaster 50 Delta Flow
Al's a-arms gen4.5, Moog LBJs
custom fishing pole roof rack
front hooks & dual hitch receivers
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 09, 2008 10:15 pm 
Offline
LOST Member

Joined: Fri Nov 02, 2007 4:17 pm
Posts: 250
Just to see how much I saved... How much does it run for a shop to do yours?

_________________
Patriot Blue 04 KJ
OME HD lift w/ 1/8" Clevis lift
LT 245/75/16 Revo's
Husky liners
Aeroturbine 2525
Amsoil


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 09, 2008 11:07 pm 
Offline
LOST Member
User avatar

Joined: Mon Nov 12, 2007 9:22 pm
Posts: 281
Location: the beach, nj
btn 4 to 5..aka std 85 per hr. its worth it for me bc its done correctly the first time :wink: :wink: ..no other option, actually :)

_________________
Black '03 Renegade
custom 3"OME MD lift w/strut plates
245/70/16 General Grabber AT2s
Spidertrax 1.25" wheel spacers
K&N Intake, Flowmaster 50 Delta Flow
Al's a-arms gen4.5, Moog LBJs
custom fishing pole roof rack
front hooks & dual hitch receivers
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com