It is currently Sun Nov 08, 2026 12:11 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: tire size question
PostPosted: Tue Jun 17, 2008 7:55 pm 
Offline
LOST Newbie

Joined: Mon Jun 16, 2008 12:46 am
Posts: 41
I have a 2wd liberty. I have 4 conduit nuts on clevis and 1 rear isolator on each side. What size tires can I run with out trimming or rubbing? Would like to get 245-75-16. is this to big?

_________________
2004 Jeep Liberty Columbia Edition. Homemade K&N air intake
1996 Jeep Cherokee
1971 Jeepster Commando Truck. Completely restored, custom lift with to many extras to list.
1966 CJ 5. restored with 33inch tires and a PTO winch. Also, to many to list.
1955 CJ 5 project.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 17, 2008 9:01 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Dec 29, 2005 9:59 pm
Posts: 5171
Location: Austin, TX
Without some type of 2 1/2 lift - I think 245/70/16 is the highest safe bet - you might be able to go higher - but it'd be a test fit and see what rubs, depends on whether you can find a tire dealer - who'll let you try different sizes.

but on the other hand - the reason 4wd Liberties are limited to 2 1/2" is because of the CV joints - that you don't have - so you might be able to stack 2 different lifts - a spacer and spring- or OTT (make sure you have bumpstops)-

check out swmpthg

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=24761&postdays=0&postorder=asc&start=0

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 17, 2008 9:26 pm 
Offline
I live here
I live here
User avatar

Joined: Sun Jul 10, 2005 6:59 pm
Posts: 5839
Location: Aurora, CO
Deleted your two other repeated threads posted in this section.

_________________
===
New KJ Gear - Desert Armor Flak

2004 Renegade Light Khaki - 4" JBA Lift - Rock Lizard Products: Komodo Dragon Rear Bumper, Prototype Winch-mount Front Bumper, Super Skink Sliders - All J's Super Tranny Skid II - 31" Firestone Destination AT's on Moab wheels - Cobra 75W CB w/ stock Antenna mod

[b]Retired, US Military


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 17, 2008 9:49 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
ATXKJ wrote:
Without some type of 2 1/2 lift - I think 245/70/16 is the highest safe bet - you might be able to go higher - but it'd be a test fit and see what rubs, depends on whether you can find a tire dealer - who'll let you try different sizes.

but on the other hand - the reason 4wd Liberties are limited to 2 1/2" is because of the CV joints - that you don't have - so you might be able to stack 2 different lifts - a spacer and spring- or OTT (make sure you have bumpstops)-

check out swmpthg

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=24761&postdays=0&postorder=asc&start=0


everyone keeps saying check out swmpthg but he finally lowered it due to problems so not a good example

Since 245-70s will run on a stck I would think raising it another inch or so you maybe able to go one more size if you are not going to off road it, jjst have to do some measurements and see how much you gained with the 4 conduit nuts

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 17, 2008 10:04 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Dec 29, 2005 9:59 pm
Posts: 5171
Location: Austin, TX
What problems did swmpthg have? I missed that.

the point for Clint was that the 2wd shouldn't have the CV problems - and if that was swmpthg's concern then the 2wd could still run the taller lift - a 'prerunner' style.

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 17, 2008 10:05 pm 
Offline
LOST Newbie

Joined: Mon Jun 16, 2008 12:46 am
Posts: 41
Thanks for the info.

_________________
2004 Jeep Liberty Columbia Edition. Homemade K&N air intake
1996 Jeep Cherokee
1971 Jeepster Commando Truck. Completely restored, custom lift with to many extras to list.
1966 CJ 5. restored with 33inch tires and a PTO winch. Also, to many to list.
1955 CJ 5 project.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 17, 2008 10:14 pm 
Offline
LOST Newbie

Joined: Mon Jun 16, 2008 12:46 am
Posts: 41
ATXKJ said an OTT lift, what is that. Not really sure?

_________________
2004 Jeep Liberty Columbia Edition. Homemade K&N air intake
1996 Jeep Cherokee
1971 Jeepster Commando Truck. Completely restored, custom lift with to many extras to list.
1966 CJ 5. restored with 33inch tires and a PTO winch. Also, to many to list.
1955 CJ 5 project.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 17, 2008 10:21 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon May 22, 2006 6:28 pm
Posts: 3880
Location: Wichita/ Pittsburg, Kansas
Clint Reynolds wrote:
ATXKJ said an OTT lift, what is that. Not really sure?


over the top=BAD! just stay away from them

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 18, 2008 1:21 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Dec 29, 2005 9:59 pm
Posts: 5171
Location: Austin, TX
an OTT lift is the type sold by Rocky Road as the Budget lift (I think Rusty's sells a version also)- it's basically a big spacer the goes on the Top - between the strut and the strut mount.

The bad name comes from the fact that if all you do is bolt in the lift - the first time you cycle the suspension full cycle - it will bottom out the strutt and kill the internals - however there's an easy fix - install a longer bumpstop. that prevents the the damage. And we have had 2-3 folks use them successfully.

And the OTT would be an easy way to 'stack' 2 lifts.

Although you would be experimenting and finding problems that no one else has dealt with so it might be something to try later - after you've done your 1st lift

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=5379&postdays=0&postorder=asc&start=0

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com