I am off work now and am getting started on the lift.

Tale of the Tape
Front Wheels:
Ground to Flair: 32"
Center of Hub to Flair: 18 1/2"
Rear Wheels:
Ground to Flair: 32 1/2"
Centerof Hub to Flair: 19"

Pictures to follow, wish me luck.

Good Luck, give you 3 hours to get finished pictures on here!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

WOOOHOOO, cant wait for the pics.

_________________
My Rig:
2008 Jeep Wrangler JKU
OME HD lift
35" tires (thus far)
plus a ton of other things. J.E.E.P.

HAHA!! 3 hours my struts are not getting compressed until tomorrow when my tires get mounted. Should have the rear finished shortly and start the front after that.

Ppppppppffffffftttttttttttttt!!!!!!!!!!! ROTFLMAO!!!!!! Yeah,..... RIGHT..... ;'-D

_________________
Colin
LOST#85291
"Blue Bunny"
04 KJ Sport 3.7L AT 4x4
Steel IFS/DL&DTT/4.10s/Tow Pkg/Mopar-Rusty's-Skid Row skids&sliders/OME struts&springs/Rancho shocks/Terraflex bumpstops/Landy FRH/Gen Steel/Grabber AT2s/Spidertrax/Rockcrusher/Hella/Smittybilt XRC8/Bulldog wiring/NAPA brakes/JBA UCAs&spacers/Deka Intimidator

what 3 hours is plenty of time

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Alrighty, the rear is finished and the axel is loaded new numbers fro the center of the hub are a whopping 21"

I helped my friend install my FL II. In the time it took me to remove the air box and battery tray, he had the rear done and was waiting on me to get out of his way to finish the front.
The whole install was 45 mins....it was crazy.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

Just about finished with the front side of the lift much easier then I thought. only problem now are the bumpstops, I've tried and tried with no results. any suggestions?

Well that is it for tonight. Everything is done, need to do brakes tomorrow and rebuild front.

Now for the update!!! the front is full assembled and on the ground. It was a little tricky getting the forks reconnected to the lower arms no big deal though. Just ran into a little trouble on the rear drums. Had to run out and get new hardware. should be done soon and back on the road. Will update with pictures soon.

thanks to everyone for your input, and help.

update anytime soon would be nice and pics also. but if you work like i do, you probably gonna have to go out and get more alcohol.

I have pictures on my camera just need to figure out how to post them

try photobucket, it free and super easy to use

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/

Before from the side

From the Front

and the rear

Rear on Jacks

Rear Wheel Well Before

Daystar Spacer installed

On to the Front

Tear Down Begins

What's missing in this Pic?

and there goes the pinchies

after a little paint... plan on rhino-lining the wells

and the strut assembly fully asembled

More pics to come after I get some pics today of the finished product