It is currently Thu Nov 05, 2026 1:27 pm

View unanswered posts | View active topics


Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KJ 4X4 Discussion---2002-2007 Liberty Models

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
ObiHann
 Post subject: What size bolt is this?
PostPosted: Tue Jul 29, 2008 10:29 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jun 06, 2008 7:39 am
Posts: 996
Location: Halifax. Nova Scotia
The bolts that hold the back seat in, the smaller ones... what size is that? They hold the brackets down that are a support for the back seats, there is usually 1 bolt on each side, than 2 close to the middle. I lost one when I was taking my carpets out... Maybe I will just replace them all with stainless steel LOL

_________________
02 KJ "Frank The Turtle"
http://www.cardomain.com/ride/3111598
Top
 Profile  
 
daspes
 Post subject:
PostPosted: Tue Jul 29, 2008 11:26 am 
Offline
Moderator
Moderator
User avatar

Joined: Thu Apr 05, 2007 11:54 pm
Posts: 2787
Location: Jacksonville, FL
Just had mine off this weekend, along with everything else in the interior. It is either a 10mm or a 12mm. Just can't remember which one...

_________________
- Mike
'12 JK

Jeep Tech Files
Top
 Profile  
 
03CDKJ
 Post subject: Re: What size bolt is this?
PostPosted: Tue Jul 29, 2008 11:50 am 
Offline
Only in a Jeep!
Only in a Jeep!
User avatar

Joined: Mon Apr 03, 2006 6:49 pm
Posts: 3966
Location: OHIO, Indian Trail-North Carolina
ObiHann wrote:
The bolts that hold the back seat in, the smaller ones... what size is that? They hold the brackets down that are a support for the back seats, there is usually 1 bolt on each side, than 2 close to the middle. I lost one when I was taking my carpets out... Maybe I will just replace them all with stainless steel LOL


I believe they are 10 mm... If you have the others....shouldn't you be able to tell :?

_________________
2000 Cherokee Trail Hawk
3.5" R.E Superflex Lift, R.E Quick Disconnects, R.E Rear Driveshaft, SYE, OME Steering Stabilizer, ARB Diff Covers, JW Speaker Black Heated Headlights, Mickey Thompson 16x8 wheels, 245/75r16 Toyo Open Country AT's, 15 lb Powertank

2003 KJ Sport (BLACK) 230,000+Miles (Decommissioned)
Top
 Profile  
 
ObiHann
 Post subject:
PostPosted: Tue Jul 29, 2008 12:07 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jun 06, 2008 7:39 am
Posts: 996
Location: Halifax. Nova Scotia
I have the other... but I was kind of hoping I could get it off the top of someones head, that way I don't have to walk into a store and say "do you have one of these?" and feel like a idiot :D

_________________
02 KJ "Frank The Turtle"
http://www.cardomain.com/ride/3111598
Top
 Profile  
 
03CDKJ
 Post subject:
PostPosted: Tue Jul 29, 2008 12:12 pm 
Offline
Only in a Jeep!
Only in a Jeep!
User avatar

Joined: Mon Apr 03, 2006 6:49 pm
Posts: 3966
Location: OHIO, Indian Trail-North Carolina
ObiHann wrote:
I have the other... but I was kind of hoping I could get it off the top of someones head, that way I don't have to walk into a store and say "do you have one of these?" and feel like a idiot :D


yes, I know that feeling.... :wink:

_________________
2000 Cherokee Trail Hawk
3.5" R.E Superflex Lift, R.E Quick Disconnects, R.E Rear Driveshaft, SYE, OME Steering Stabilizer, ARB Diff Covers, JW Speaker Black Heated Headlights, Mickey Thompson 16x8 wheels, 245/75r16 Toyo Open Country AT's, 15 lb Powertank

2003 KJ Sport (BLACK) 230,000+Miles (Decommissioned)
Top
 Profile  
 
tommudd
 Post subject:
PostPosted: Tue Jul 29, 2008 12:36 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
cdiekhans wrote:
ObiHann wrote:
I have the other... but I was kind of hoping I could get it off the top of someones head, that way I don't have to walk into a store and say "do you have one of these?" and feel like a idiot :D


yes, I know that feeling.... :wink:


:-)r :-)r

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited
Top
 Profile  
 
tjkj2002
 Post subject:
PostPosted: Tue Jul 29, 2008 12:40 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
ObiHann wrote:
I have the other... but I was kind of hoping I could get it off the top of someones head, that way I don't have to walk into a store and say "do you have one of these?" and feel like a idiot :D
You know that most places that sell fastners will have bolt size charts so you do not need to ask that question,just bring the bolt in and find the corisponding nut that fits it to get the bolt size.
Top
 Profile  
 
ObiHann
 Post subject:
PostPosted: Tue Jul 29, 2008 12:59 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jun 06, 2008 7:39 am
Posts: 996
Location: Halifax. Nova Scotia
Cool, thanks for the info! I shall have to go a hardware shop on the way home :D

_________________
02 KJ "Frank The Turtle"
http://www.cardomain.com/ride/3111598
Top
 Profile  
 
tommudd
 Post subject:
PostPosted: Tue Jul 29, 2008 1:06 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
ObiHann wrote:
Cool, thanks for the info! I shall have to go a hardware shop on the way home :D


they also have these neat little guages that you stick a bolt in to find the size for sell as well, have a couple hanging in the garage so I know as soon as I pull a bolt out what size it is, also have for drill bits etc. great little tools for reference

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited
Top
 Profile  
 
ObiHann
 Post subject:
PostPosted: Tue Jul 29, 2008 1:11 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jun 06, 2008 7:39 am
Posts: 996
Location: Halifax. Nova Scotia
tommudd wrote:
ObiHann wrote:
Cool, thanks for the info! I shall have to go a hardware shop on the way home :D


they also have these neat little guages that you stick a bolt in to find the size for sell as well, have a couple hanging in the garage so I know as soon as I pull a bolt out what size it is, also have for drill bits etc. great little tools for reference



Well, maybe Ill get that too LOL

_________________
02 KJ "Frank The Turtle"
http://www.cardomain.com/ride/3111598
Top
 Profile  
 
Dje Ryu
 Post subject:
PostPosted: Wed Jul 30, 2008 1:52 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Feb 17, 2007 7:26 pm
Posts: 1325
Location: Casper, Wyoming
You guys wouldn't believe the tools I have available to measure thread pitches/diameters/tapers, etc.

Never taken the seats out so I don't know for certain but if the head is 12mm, then the thread pattern is probably something like M10x1.5 or M8x1.25.

_________________
Ron


"There are few problems in life the liberal application of duct tape can't solve."
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KJ 4X4 Discussion---2002-2007 Liberty Models

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management