so i got the OIL Press and Trans temp guages form autometer today. if anyone would like to tell a or give me some pointers on how to hook them up to the KJ, please let me know.

You will need a "T" adapter for the oil prssure sensor,it's right above the oil filter,since the PCM needs the electronic oil pressure sensor to function right.The trans temp you will need to drop the tranny pan and drill a hole in the tranny pan for the temp sensor.

thanks for the heads up. do you have a write up about this or can you give me some adivse on ho and here?

No write up,sorry.

Is the oil pressure gauge electric or mechanical(wires or plastic tube)? If it is electric it's to easy,just take out the OEM oil pressure sensor and use it to get a "T" fitting and put the "T" fitting in then put both sensors in and run the wires to the gauge.If it's a mechanical gauge that comes with a plastic tube,1st throw the plastic tube away and go to any parts stores and get the copper tube instead.Carefully route it into the cabin and to the gauge.

The tranny temp sensor is to easy,just drop the pan,might as well change the filter/filters while you have it dropped.Drill a hole on the side of the pan per the instructions,make sure it will not be in the way of anything and not exposed to being ripped off while offroad.Use RTV to help seal it in and put pan back on.

where did you get your gage pod and how do you like it?

_________________
'03 Liberty w/3.7L & 45FRE Tranny
Revetek 2" Lift & JBA Gen 5 A-arms
Maxxis Buckshot XMT Mudders 31x10.5 on Soft 8's
Jet Stage 2 Chip : '07 Air Intake
Relocated IAT Sensor : '05 HVAC Controls
Front Hitch : EVIC from '01 GC : Custom Rock Rails
Transgo Shift Reprogramming Kit
KC Driving Lights & Aux Backup Lights
.......all GONE!

I have a similar set up trans temp and volt meter. I didn't drop the pan yet and tap it for the sender. I have the sender tee'd into the hot line coming out of the trans. I plan on putting it in the pan in the future though.

_________________
02' Sport- SOLD

07' Dodge Ram Quad Cab 1500 4x4
Yeah it's got a hemi!

got the guages and pod from ebay. great find one day from just typing in jeep liberty in the search spot.

tjkj---thanks for the help and info. i hsould be doing this as soon as i move into new house and get everything put in the right spot. no time for KJ right now, just time for the house. but i am gonna PM in a few days and find out exactly what copper piping i should use and the best place to route it.