tommudd wrote:
OK my ranting is over so to answer the question first asked by DJBassmanThe trails you mentioned are like TJKJ said, very unforgiving, so you need to build a rig for that purpose only, and haul it out to the trails more than likely. Sounds like you want a rig you can drive every day but also go on some of the harder trails ( with someone else along hopefully) and get great shots. So you have to think is it worth it for a full on trial rig or what do I really want. Maybe the best deal for you is to build yours to handle most of the trails and then get real freindly with those people who have the out of site rigs and tag along taking pictures of them along with the other great shots you will get.

Yes... this seems the idea I am looking/thinking of, most trails When I said no body damage, I did not mean no dents and such, just not destroying. I just did not know what the clearance the 35" gave. I get the idea now.
I like the idea of using the KJ for most trails, and tow an atv, the KJ can pull that for the most part I have a class 3 hitch.
So maybe what I am really looking at; a Frankenlift, a clevis lift. A BFG AT KO at LT265/R75 16D is 31.7". The LT285/R75 16D IS 32.8". Right now I have the BFG AT KO LT235/70R 16C which is 29.1. I have 7" clearance from the lowest point under the front diff skid plate and 8" cleance at the back dif. So, I guess if I put the 265 on, I should net 2.6" and bring the 7" to 9" clearnace. The 285 would net 3.7 and take me to 10" clearance.
I did not know I could put a R75 on, I thought I had to stay R70. There is a LT235/R85 16E that is 31.7", can this also be put on? Just asking the question. It seems every agrees some what that the best is geting to a 32" tire mark. The LT285/R75 16E is a 33" tire and it seems a larger lift is needed for that, so the 265 seems to be the target.
If I am going to lift it, I want to lift it machanicly sound. I have see all the post of the lifts were some were mixed, or not done 100% and that cause machanical issues and not from doing any trails. That is what I trully want to avoid, not doing it soundly. That is why I mentioned the disk breaks needed to be change or the diff's (grearing). Can that back tire rack hold a 265 tire, I need to look that up.
Thanks for all the answers. I did learn something from this.