Hello,
Just a quickie, do you guys know what I need to do to get the T-Max winch to fit into a ARB Bumper, the holes are all wrong adn I am lost.
I was thinking of getting a steel plate to cover the original holes and punch new ones through the plate but maybe there is something easier.

Thanks alot.

_________________
...and so life goes!!!!
'03 2.5 CRD Renegade
OME HD front strut/King Springs XHD front spring and DoetschTech Rear shocks and springs
ARB Bull Bar
T-Max EW-9000 Competition(still to fit)
235/70R16 BFGs AT

A piece of plate ought to do.Make sure you prime and paint the plate to avoid any rust issues.

_________________
Bub
06 Inop Edition CRD Silver
06 Inop Edition CRD Green

holes are drilled for warn if I recall from my buddys Kj. you will need to modify for the TJMax

_________________
“You cannot solve a problem from the same consciousness that created it."

“Learn from yesterday, live for today, hope for tomorrow. The important thing is not to stop questioning.”

As long as the winch is a two piece design (control box seperate from the drum and motor body) it should be fine. I have a Mile Marker mounted to my ARB and I didn't have a problem.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.