All of these years on my past 4 WDs, I have always just used whatever switches came with the lights, compressor etc
Since I am getting ready to add some things I now want to do all of the switches in the KJ the same, nice switch panel with everything in one spot. Will have about 7 or 8 switches total for; Rack forward lights, bumper Driving lights, rear back up lights, side mounted rack lights, compressor, ARB rear locker, Interior lights, etc.

Have found www.otrattw.com and have heard some good reports from them, they handle Carling Technologies switches

so any better place(s) to buy similar switches?
I like these due to having what they are for on them, looks good and professional

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Good post TOM. I’ve been thinking about the same thing. The ARB pkg will come with swithes, but that’s cool if you want to add your own. Here are the switches that I will need:

Compressor switch
ARB front air locker
ARB rear air locker
Backup Lights
Roof lights
Grill guard lights

Do they make a universal Switch Panel?

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.

They have I think what is it a 3 and 8 switch panel I think, there is a link to a site that the guy is doing panels for Wranglers, nice looking for sure with some even having an air gauge......... cool! I just skimmed over it last night as my wife was calling out "so is it Jeep stuff again tonight or time for bed???"

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

This guy has some really cool switch...for lockers, compressors, winches, lights, everything.....

http://www.12voltguy.com/

_________________
2002 Jeep KJ Sport 3.7L 4x4

245/75-16 Mastercraft Courser HSX, 16x7 Cragar, 2" OME MD Lift, ARB Bumper
AEM Brute Force Cold Air Intake, Flowmaster Super 44 Muffler

Currently working on: Full service on transmission & bed-lining ARB bumper

viewtopic.php?f=43&t=84650