It is currently Fri Nov 06, 2026 10:23 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Ham Radio Setup
PostPosted: Sat Oct 18, 2008 8:19 pm 
Offline
LOST Junkie
User avatar

Joined: Sun Apr 20, 2008 10:24 pm
Posts: 628
Location: Burbank, CA
Roof Rack - SBB-5 $60
Antenna - Comet K515s $70

Works great with only 1.5 watts I hit about 100 miles away! Hope to talk to you someday this is KD6TAV saying 73's all

Image

Image

Image

[/img]

_________________
LIFTED 2008 Liberty Sport 4x4 - Automatic - Select Trac - Skid Plates - Tow Package - Sirius Radio - Popular Group Package
4" JBA Lift v2.1 with 265/75r16, a Dual Band 144 / 440 Mobile Ham Radio with SBB-5 antenna. KD6TAV
PICTURES OF MY RIG
Lifted by JEEPIN BY AL - Get yours by following my link


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 19, 2008 3:21 am 
Offline
LOST Member
User avatar

Joined: Wed Oct 10, 2007 10:17 am
Posts: 416
Location: Merced, CA
is that Comet antenna made to work without a ground? did you hook a VSWR meter and check it out? The reason I ask all that is because normally, the antenna would want to have a good ground. The roof rack doesn't give it a ground.

Rick, K6SIX

_________________
Merced, CA
2008 Liberty Sport
Red Rock Crystal Pearlcoat
Tow Package
Factory Skid Plates
[url=http://www.speedtest.net/result/828427318.png[/img]http://www.speedtest.net/result/828427318.png[/img[/url]


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 19, 2008 12:03 pm 
Offline
LOST Junkie
User avatar

Joined: Sun Apr 20, 2008 10:24 pm
Posts: 628
Location: Burbank, CA
rickm wrote:
is that Comet antenna made to work without a ground? did you hook a VSWR meter and check it out? The reason I ask all that is because normally, the antenna would want to have a good ground. The roof rack doesn't give it a ground.

Rick, K6SIX


Yes, this comet is ground independant! it states less than 1.5 swr, but if you wish I will borrow a swr meter and check it. I wanted a good gain anntenna and this as I stated is pretty good. I went with a roof rack versus one that would clamp to the edge of the rear tailgate near the rear light as the only better gain anttenna would have been 62" ( great gain 4.5 2meter and 7.2gain 440, I think those were the #'s) but if offroading that location would be prone to catching bushes and moving around a lot and wacking the truck. same if I put it on the edge of the hood. I am really happy with the performance of this antenna. it's mostly line of site as you know. we did a test one two people left both with roof mounted antennas (one drilled thru w/ 50 watts and one mag mount w/ only 5 watts) they both cut out at the same time once the went behind a mt curve. well thanks for asking. what you got? 73's

_________________
LIFTED 2008 Liberty Sport 4x4 - Automatic - Select Trac - Skid Plates - Tow Package - Sirius Radio - Popular Group Package
4" JBA Lift v2.1 with 265/75r16, a Dual Band 144 / 440 Mobile Ham Radio with SBB-5 antenna. KD6TAV
PICTURES OF MY RIG
Lifted by JEEPIN BY AL - Get yours by following my link


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 19, 2008 3:11 pm 
Offline
LOST Newbie
User avatar

Joined: Wed Nov 14, 2007 1:29 am
Posts: 82
Location: Montana
Are you guys on 2 meters?

_________________
Just purchased a brand new 08 Liberty 4x4 Limited, Auto Trans, Command Traq, Light Graystone Pearl. Looking forward to being part of the forum.


Top
 Profile  
 
 Post subject: 2 and 440
PostPosted: Sun Oct 19, 2008 6:50 pm 
Offline
LOST Junkie
User avatar

Joined: Sun Apr 20, 2008 10:24 pm
Posts: 628
Location: Burbank, CA
rickm ur in merced can you hit a repeater in fresno? A winsystem repeater? Is very busy but we could try it?

Fresno CA K6JSI 444.250 (+) 141.3 Meadow Lakes 4,580' + 40' 3847
Fresno CA K6JSI 146.790 (-) 141.3 Meadow Lakes 4,580' + 40' 3847

Sartori - did not find any linked winsystem near you. check them out at winsystem.org

_________________
LIFTED 2008 Liberty Sport 4x4 - Automatic - Select Trac - Skid Plates - Tow Package - Sirius Radio - Popular Group Package
4" JBA Lift v2.1 with 265/75r16, a Dual Band 144 / 440 Mobile Ham Radio with SBB-5 antenna. KD6TAV
PICTURES OF MY RIG
Lifted by JEEPIN BY AL - Get yours by following my link


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 20, 2008 9:03 pm 
Offline
LOST Member
User avatar

Joined: Wed Oct 10, 2007 10:17 am
Posts: 416
Location: Merced, CA
Comet makes some nice antennas. I knew they had some that did not require a ground and were made to mount just like you mounted yours.

I don't have any ham radios mounted in my vehicle right now, they are mostly all still packed away from a move a couple of years ago.

I do have a handheld, I'll have to try that Fresno repeater.

Satori - I do not use 2 meters at all... my theory is that the only thing 2 meters is good for is an I.F. strip LOL

:lol:

_________________
Merced, CA
2008 Liberty Sport
Red Rock Crystal Pearlcoat
Tow Package
Factory Skid Plates
[url=http://www.speedtest.net/result/828427318.png[/img]http://www.speedtest.net/result/828427318.png[/img[/url]


Top
 Profile  
 
 Post subject: Ham Radio Setup ~ Wiring
PostPosted: Sat Feb 14, 2009 10:16 am 
Offline
LOST Newbie

Joined: Thu Jan 03, 2008 12:26 pm
Posts: 3
Location: Rockford, IL
Hi,
I'm about to add a Yaesu 857D to my KK. And of course I'm looking for a good place to wire the power cable. Any ideas? Is there good access to the engine compartment?
Thanks!
W9SWT

_________________
<== I don't know why it says Joined: 03 Jan 2008 I've been a member since Nov 2002!


Top
 Profile  
 
 Post subject: Re: Ham Radio Setup ~ Wiring
PostPosted: Sat Feb 14, 2009 7:43 pm 
Offline
LOST Junkie
User avatar

Joined: Sun Apr 20, 2008 10:24 pm
Posts: 628
Location: Burbank, CA
stwigg wrote:
Hi,
I'm about to add a Yaesu 857D to my KK. And of course I'm looking for a good place to wire the power cable. Any ideas? Is there good access to the engine compartment?
Thanks!
W9SWT


Not sure. I have my antenna wire just laying in the truck right now. As I have not yet got my mobile radio and still using a handheld with no need for power. I hope to get one today for V.Day. So you questions is a good one. I'm sure some of the KK owners have punch the firewall to power up their amps for a better stereo system. I'll keep u posted as you keep me posted.

_________________
LIFTED 2008 Liberty Sport 4x4 - Automatic - Select Trac - Skid Plates - Tow Package - Sirius Radio - Popular Group Package
4" JBA Lift v2.1 with 265/75r16, a Dual Band 144 / 440 Mobile Ham Radio with SBB-5 antenna. KD6TAV
PICTURES OF MY RIG
Lifted by JEEPIN BY AL - Get yours by following my link


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 14, 2009 8:17 pm 
Offline
LOST Member
User avatar

Joined: Wed Oct 08, 2008 11:11 pm
Posts: 431
Location: canada
the plastic cover just above your legs when you are driving is very easy to remove. it opens like a glovebox. then you have acess to the engine bay via a 1'' hole that has a rubber cover on it. you can plug your stuff directly on the battery like me or use the fuse box. all my arb cables went there.

_________________
08 KK north, select track
custom skids , sliders and steel bumpers
12k titan winch
4.56 gears, arb locker front and rear.
3'' fox lift, Jba A arms
33'' Bfg KM2 with 1 1/4'' wheel spacers


Top
 Profile  
 
 Post subject: Re: Ham Radio Setup ~ Wiring
PostPosted: Mon Mar 02, 2009 5:14 pm 
Offline
LOST Junkie
User avatar

Joined: Sun Apr 20, 2008 10:24 pm
Posts: 628
Location: Burbank, CA
stwigg wrote:
Hi,
I'm about to add a Yaesu 857D to my KK. And of course I'm looking for a good place to wire the power cable. Any ideas? Is there good access to the engine compartment?
Thanks!
W9SWT


Just installed my FT-8800R it was very easy. It fits nicely under the passenger seat and to get to the battery there is a rubber plug at the top of the passenger floor mat. The hardest part is really running the wire along the firewall to the battery on the driver side. And that is not really hard just some ties here and there. The head unit on my I place in the tray above the stereo head unit and it works out very nicely. The additional speaker fits nicely behind the plastic panel for the stereo just behind the a/c controls.

_________________
LIFTED 2008 Liberty Sport 4x4 - Automatic - Select Trac - Skid Plates - Tow Package - Sirius Radio - Popular Group Package
4" JBA Lift v2.1 with 265/75r16, a Dual Band 144 / 440 Mobile Ham Radio with SBB-5 antenna. KD6TAV
PICTURES OF MY RIG
Lifted by JEEPIN BY AL - Get yours by following my link


Top
 Profile  
 
 Post subject: Re: Ham Radio Setup ~ Wiring
PostPosted: Fri Mar 06, 2009 12:58 pm 
Offline
LOST Junkie

Joined: Tue Sep 16, 2008 3:44 am
Posts: 744
Location: Lorton, VA
E2 wrote:
stwigg wrote:
Hi,
I'm about to add a Yaesu 857D to my KK. And of course I'm looking for a good place to wire the power cable. Any ideas? Is there good access to the engine compartment?
Thanks!
W9SWT


Just installed my FT-8800R it was very easy. It fits nicely under the passenger seat and to get to the battery there is a rubber plug at the top of the passenger floor mat. The hardest part is really running the wire along the firewall to the battery on the driver side. And that is not really hard just some ties here and there. The head unit on my I place in the tray above the stereo head unit and it works out very nicely. The additional speaker fits nicely behind the plastic panel for the stereo just behind the a/c controls.



Do you have an installed pic of the headunit and antenna?

_________________
2008 Jeep Commander Overland
1999 Chevrolet Corvette

http://www.expeditionportal.com/forum/
http://www.jeepcommander.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com