Im going to start one of my little piggy banks and i need to know how much to put back each time and how often.
I was wondering if many ppl ran the lift without al's A arms or if it could be done

Not a Franky but just as high and I ran stock arms for about 70,000 miles and they are still tight and useable, just had an opportunity to buy Als and did. Also a good ..repeat good, alignment person can take the time and get the alignment pretty close to where it will not give you any wear or pulling problems with the stock arms.
Granted it maybe better with Als arms but lots have ran without

just my quarters worth

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

I have stock uppers on right now, just installed a frankenlift, I was able to get the alignment completely back within specs but just barely.

_________________
Jeepless again.

Wheeling an Isuzu Rodeo on 1 tons
and a Stock Chevy Tracker

i have stock ones with my franky... alignment was perfect.. or close enough to not matter rather

_________________
2006 Renegade. Completely stock.

Me too.

_________________
My Jeep Build ----> Big Black

Sounds Good

That means maybe I can get it a little Faster less to save for

I've got stock ones with the Franky. There tight and my alignment guy can get camber and toe into specs. He cannot do caster because there is no caster adjustment. All I know is that it drives straight and I'm happy with it.

_________________
02' KJ Limited/Frankenlift I HD Coils
245/75 Big Foot A/T's on Soft 8's
EBC Greenstuffs 7000
K&N Air Filter
Full set Mopar skids
Sirius Sat Radio
Cheapa$$ Subwoofer
Custom pinstripes:)