Bump Stops

dirt pig · **Posted:** Fri Jan 23, 2009 4:25 am

Any one have a picture of what the factory bump stops look like?
Dimensions would be good too !!

I'm compiling the parts for a 2.5 inch lift and still need bigger(longer) bump stops.
If I lift 2.5, then I suppose I have to increase bump stop length by 2.5 also.
Is this correct?

michael_dba · **Joined:** Tue Jun 03, 2008 1:23 am **Posts:** 64

These work fine for my OTT lifted KJ.....20k miles with no blown out struts or any metal-to-metal contact.

TerraFlex bumpstops (call and ask for just the bumpstops):
http://www.teraflexplus.com/shop/produc ... ucts_id=79

.

tommudd · **Posted:** Fri Jan 23, 2009 2:13 pm

michael_dba wrote:

These work fine for my OTT lifted KJ.....20k miles with no blown out struts or any metal-to-metal contact.

TerraFlex bumpstops (call and ask for just the bumpstops):
http://www.teraflexplus.com/shop/produc ... ucts_id=79

.

Yep those are what you need work great and not that expensive

tonycrd · **Posted:** Fri Jan 23, 2009 2:33 pm

I got them here:

http://www.trailquest.com/teraflex/KJ/suspension.shtml#bumpstop

Great customer service!

BjBnet · **Posted:** Fri Jan 23, 2009 4:13 pm

tonycrd wrote:

Great customer service!

sent them an email 2 weeks ago (Jan 14 to Marlene with all my info, name, address...and asked for a total so I could call in with my CC) for ordering a pair and never heard back.

Back-n-Black · **Posted:** Fri Jan 23, 2009 4:15 pm

So what was the total cost? Looks like two are needed per side making the total count 4 @ $22 each right? $88 plus shipping?

03kjsport · **Posted:** Fri Jan 23, 2009 5:03 pm

can you get them in red? any stops out there in red that would work?

Fulltimer · **Posted:** Fri Jan 23, 2009 6:37 pm

How tall are they?

Terry

tommudd · **Posted:** Fri Jan 23, 2009 6:54 pm

03kjsport wrote:

can you get them in red? any stops out there in red that would work?

I have a can of I-H red paint you can borrow :lol:

dirt pig · **Posted:** Fri Jan 23, 2009 8:32 pm

That's a picture of the rear isn't it?
The one's I saw on the trailquest website are half moon shaped. (or is it the way you are holding it?)
As for color, I don't think it would matter as I don't think these are visible being so high up in the wheel well area.
Although when I come to think of it, If it's red then it must be faster :lol:

tommudd · **Posted:** Fri Jan 23, 2009 8:53 pm

you can see them when the KJ is sitting on the ground, they are sort of half mooned shaped its the way he is holding it

dirt pig · **Posted:** Fri Jan 23, 2009 9:16 pm

I look in my wheel wells; and all I see is plastic guards !!

So in order to do the lift, does all that inner guard have to be removed?

KJ04 · **Posted:** Fri Jan 23, 2009 9:18 pm

For the blind people! Yes, these are for the front only.

tommudd · **Posted:** Fri Jan 23, 2009 9:57 pm

KJ04 wrote:

For the blind people! Yes, these are for the front only.

BjBnet · **Posted:** Fri Jan 23, 2009 10:14 pm

another stupid question....can these be installed at a later time once the shocks and springs are in without having to take anything apart? They look like they snap in.
Thanks again

jeepkj02 · **Posted:** Fri Jan 23, 2009 10:45 pm

BjBnet wrote:

another stupid question....can these be installed at a later time once the shocks and springs are in without having to take anything apart? They look like they snap in.
Thanks again

YES! With the tire on I used a shovel for leverage and they went in with some force. Use some grease to get them to go in easier.

tommudd · **Posted:** Fri Jan 23, 2009 11:38 pm

you do not have to take the inner fender out to do a lift everything is right there

jsc7002 · **Posted:** Sat Jan 24, 2009 12:22 am

Fulltimer wrote:

How tall are they?

Terry

a little over 3"

Fulltimer · **Posted:** Sat Jan 24, 2009 12:23 am

Fulltimer wrote:

How tall are they?

Terry

Anybody?

Terry

dirt pig · **Posted:** Sat Jan 24, 2009 12:29 am

Now, I know that you use 2 hockey pucks per side in the rear.
what adhesive is used to laminate the pucks together?
And what adhesive is used to stick the 2 pucks to the mount?

(Sorry about all the stupid questions, I'm a newby afterall)

Bump Stops

Who is online