Hi,
I've got a good chance to get brand new BFG's on 15" steel rims (from 98 TJ) for $500.00 for a friends libby.
My question is would these fit?
It has the 17" alum wheels now.

Most 15" steel wheels will clear the brake calipers. 15" Aluminums don't.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...

should, are they the 5x4.5 bolt pattern?

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/

are they the stock steel rims on the TJ ? They may not fit as only the soft 8s etc in 15 inch fit well

I would check them real close on the front of the Libby before you buy, there is a litle difference between soft 8s and production steel wheels

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Good point. I didn't think about that.

Correction: Most aftermarket 15" steel wheels will clear the calipers.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...

thanks guys. I'll check them first...

There is some clearancing of the caliper necessary for stock Jeep 15s to be bolted on to a KJ

While we are talking about 15's on an 05 how about these?

http://www.jcwhitney.com/autoparts/Item ... 4711319547

Mean 29"s on a stock liberty could be a fun cheap way to throw some mud!!!

_________________
SOLD!!!
2005 Liberty Renegade
STT CustomSTUFF
4" Stump Lift.
JBA UCA's
245/75/16 GOODYEAR DURA TRACS


Thanks for throwing me under the bus Evil... Just remember this when you decide to turn yours back in to a... Real Jeep.

how about these?

http://www.jcwhitney.com/autoparts/Item ... 4711319547

_________________
SOLD!!!
2005 Liberty Renegade
STT CustomSTUFF
4" Stump Lift.
JBA UCA's
245/75/16 GOODYEAR DURA TRACS


Thanks for throwing me under the bus Evil... Just remember this when you decide to turn yours back in to a... Real Jeep.

they look like they would work stumpjumper but what BS are you going to get? once you lift it you'll want less BS, 4" is what most get after they lift.

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/

i don't know the backspacing. All jc waitawhile has to say is that they are custom fit to wrangler with 5x4.5 bolt pattern

_________________
SOLD!!!
2005 Liberty Renegade
STT CustomSTUFF
4" Stump Lift.
JBA UCA's
245/75/16 GOODYEAR DURA TRACS


Thanks for throwing me under the bus Evil... Just remember this when you decide to turn yours back in to a... Real Jeep.