It is currently Tue Nov 03, 2026 5:05 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 36 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Woohoo!! Guess who's going CHEROKEE?
PostPosted: Mon Mar 16, 2009 3:56 pm 
Offline
LOST Newbie

Joined: Wed Sep 17, 2008 9:46 am
Posts: 59
Location: Gone but not forgotten
:lol: I finally received my Chrome Cherokee door molding. I only needed the front so that is all I have to replace. The cost for just the front doors including shipping was about $85 US and about 18 days of waiting. :twisted:
Now I am headed outside to get started on replacement.
:D :lol: :D :lol: :D :lol: :D


Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 16, 2009 4:14 pm 
Offline
LOST Junkie

Joined: Mon Feb 23, 2009 12:56 am
Posts: 645
Location: Santa Clara, CA
I missed the build up...

What is happening here?
We want pics as well...

_________________
2008 Liberty Limited 4X4 Command Trac 2
All stock Auto with 235/60/18


Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 16, 2009 4:16 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Feb 01, 2009 2:29 am
Posts: 5956
Location: Hillsborough, NC / Corolla NC
one of my liberty badges is kinda busted up

was thinking of replacing mine with something unique

X2 on the pics! must feed the beasts!

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632


Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 16, 2009 5:58 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Feb 24, 2009 11:04 am
Posts: 1257
Location: Pembroke Pines, FL
hrogi wrote:
I missed the build up...

What is happening here?
We want pics as well...


http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=39882

_________________
Out - 2008 Jeep Liberty Limited 4x4
In - 2011 Jeep Liberty Carbon Edition http://www.cardomain.com/ride/3972889/2 ... ed-edition


Top
 Profile  
 
 Post subject:
PostPosted: Mon Mar 16, 2009 7:02 pm 
Offline
LOST Junkie

Joined: Mon Feb 23, 2009 12:56 am
Posts: 645
Location: Santa Clara, CA
I think I should had been told to search... I was to lazy to look around..
it was 3 post done..

sorry....

cool idea on changing the baging...

_________________
2008 Liberty Limited 4X4 Command Trac 2
All stock Auto with 235/60/18


Top
 Profile  
 
 Post subject: Re: Woohoo!! Guess who's going CHEROKEE?
PostPosted: Tue Mar 17, 2009 9:48 am 
Offline
Taco Killer
User avatar

Joined: Sun Sep 28, 2008 8:26 pm
Posts: 583
Location: Laredo TX
08-FL-KK wrote:
:lol: I finally received my Chrome Cherokee door molding. I only needed the front so that is all I have to replace. The cost for just the front doors including shipping was about $85 US and about 18 days of waiting. :twisted:
Now I am headed outside to get started on replacement.
:D :lol: :D :lol: :D :lol: :D

where did you get them?

_________________
2009 4x4 Silver Liberty Limited Edition, Premium Group I and II, Skid Plate Group, Exterior Appearance Group by MOPAR, Select Trac II, Sky Slider,uconnect studios,Slush Mats, Hid HEADLAMPS, Interior LED light mod, Scangauge 2, AEM brute force intake, IPOD Integration interface for RER RADIOS, OEM Front end bra.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 17, 2009 4:23 pm 
Offline
LOST Newbie

Joined: Wed Sep 17, 2008 9:46 am
Posts: 59
Location: Gone but not forgotten
8) I got them from a dealership in Scotland. 8) Spoke to the Parts Manager several times over the phone as well as through email for purchase. The phone was for credit card info because they don't have a website to purchase parts and didn't want that info sitting around in an email. They seemed more friendly and helpful then the PMs here in the states; at least the ones I've dealt with.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 17, 2009 7:09 pm 
Offline
Taco Killer
User avatar

Joined: Sun Sep 28, 2008 8:26 pm
Posts: 583
Location: Laredo TX
would it be possible to share your knowledge on placing an order for the cherokee mouldings???
who to call to, his email and the like?
Im also dying to do the cherokee mod =)
pleeeeeeeeeeeeeease?

_________________
2009 4x4 Silver Liberty Limited Edition, Premium Group I and II, Skid Plate Group, Exterior Appearance Group by MOPAR, Select Trac II, Sky Slider,uconnect studios,Slush Mats, Hid HEADLAMPS, Interior LED light mod, Scangauge 2, AEM brute force intake, IPOD Integration interface for RER RADIOS, OEM Front end bra.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 17, 2009 7:19 pm 
Offline
LOST Member

Joined: Sat Feb 28, 2009 10:46 pm
Posts: 203
Location: Mahwah, NJ
SilverKK09 wrote:
would it be possible to share your knowledge on placing an order for the cherokee mouldings???
who to call to, his email and the like?
Im also dying to do the cherokee mod =)
pleeeeeeeeeeeeeease?



i'm dying to do it also...haha

PM info for me to PLEASE PLEASE PLEASE!! *don't make me beg*...lol

_________________
Current Vehicle - 2010 Jeep Liberty - Silver
Planned mods: 245/70/16 Hankook Dynapro ATM tires, 16x7 Black Rock 950s, JK light bar with KC Daylighters
Previous Vehicles - 1988 Mustang GT, 2006 Wrangler X, 2008 KK, 2010 KK Deep Water Blue


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 17, 2009 7:34 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Feb 24, 2009 11:04 am
Posts: 1257
Location: Pembroke Pines, FL
What does the back of the "Cherokee" look like? Does it still have the Limited or 4x4 or 3.7L badging? Does it still say Jeep on the hood and hatch? Anything else change besides the side molding?

_________________
Out - 2008 Jeep Liberty Limited 4x4
In - 2011 Jeep Liberty Carbon Edition http://www.cardomain.com/ride/3972889/2 ... ed-edition


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 17, 2009 10:33 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 13, 2007 1:28 am
Posts: 10686
Location: Some where in Colorado
sorry about the late post buddy, but from 08-FL-KK

Image
Image

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch
Image


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 17, 2009 11:09 pm 
Offline
LOST Member

Joined: Sat Feb 28, 2009 10:46 pm
Posts: 203
Location: Mahwah, NJ
what wheels are those? i like them...haha

_________________
Current Vehicle - 2010 Jeep Liberty - Silver
Planned mods: 245/70/16 Hankook Dynapro ATM tires, 16x7 Black Rock 950s, JK light bar with KC Daylighters
Previous Vehicles - 1988 Mustang GT, 2006 Wrangler X, 2008 KK, 2010 KK Deep Water Blue


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 17, 2009 11:14 pm 
Offline
LOST Newbie

Joined: Wed Sep 17, 2008 9:46 am
Posts: 59
Location: Gone but not forgotten
OK, so for those who have chrome and want to keep their chrome remember this is a factory replacement part and you do not need to replace the rear doors. This is the part numbers for just the front doors...remember this is for CHROME...Part # 55157210AA and Part # 55157211AA. ( :oops: sorry, don't have the #s for the black :oops: ) You cannot get these part #s in the States as they are listed as Export Only. I tired two different dealers and also contacted Chrysler in Detroit. All gave me the same answer. So, this is who I found to help me. He is a super nice person so please treat him kindly.

Derek Neilson
Parts Supervisor
Murray Chrysler Jeep & Dodge
T 0141 429 1616
F 0141 429 2020
E/Mail dneilson@jmgroup.co.uk

Derek is located in Scotland and it took him about 3 days to get the parts in to his department. He took it to the PO that same day and had it sent airmail to me. It took 17 to 18 days for me to receive it. The cost was only $10 usd to ship it airmail. All totaled $84.xx for all and that includes the currency conversion costs.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 17, 2009 11:17 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 13, 2007 1:28 am
Posts: 10686
Location: Some where in Colorado
ok every one, before we kill his mail box, maybe some one would like to quarter back a group deal???

FL, how did you remove/install the old/new ones?

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch
Image


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 17, 2009 11:22 pm 
Offline
LOST Member

Joined: Sat Feb 28, 2009 10:46 pm
Posts: 203
Location: Mahwah, NJ
i'd be down for a group buy...however i need the black ones since i don't have the sport and not the limited...:)

_________________
Current Vehicle - 2010 Jeep Liberty - Silver
Planned mods: 245/70/16 Hankook Dynapro ATM tires, 16x7 Black Rock 950s, JK light bar with KC Daylighters
Previous Vehicles - 1988 Mustang GT, 2006 Wrangler X, 2008 KK, 2010 KK Deep Water Blue


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 17, 2009 11:30 pm 
Offline
LOST Newbie

Joined: Wed Sep 17, 2008 9:46 am
Posts: 59
Location: Gone but not forgotten
Sorry, the process went too quickly for pictures. :P
It was a nice warm sunny day here in FL, 8) about 85deg. so the vehicle was warm to the touch. I got a small screwdriver and pried the corner away from the jeep and placed a thick piece of string behind it and started sawing away. It worked for an inch or so then broke. I pulled out the big guns :P and placed an open wire tie behind the molding and started sawing again. Once I got the old molding removed I took some adhesive remover and sprayed it on and let it sit for a few minutes then started rubbing off any remaining adhesive. Process took me about an hour and 30 minutes total. It helped that the trim was hot because I have tried to remove things like this before in the cold and had one heck of a time. hope this helps :P

:arrow: May I offer a piece of advice :?: If you have some fishing line that would work perfectly in the removal of the door molding.

:wink: thanks for posting the pics Digger :!:


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 17, 2009 11:42 pm 
Offline
LOST Newbie

Joined: Wed Sep 17, 2008 9:46 am
Posts: 59
Location: Gone but not forgotten
:lol: The parts do not come with instructions on removal or replacement but when you get to that point and you need some help I have a .PDF copy that I found somewhere on the net that I can send out.

The wheels are Mamba 17x8 with a 5-1/4" BS.
My tire guy charged me extra to mount the tires because those spokes do actually ride the lip of the rim making it almost impossible for him to get the tire on.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 18, 2009 1:16 am 
Offline
Taco Killer
User avatar

Joined: Sun Sep 28, 2008 8:26 pm
Posts: 583
Location: Laredo TX
whats the part number for the "cherokee" on the back??
Looks awesome BTW

_________________
2009 4x4 Silver Liberty Limited Edition, Premium Group I and II, Skid Plate Group, Exterior Appearance Group by MOPAR, Select Trac II, Sky Slider,uconnect studios,Slush Mats, Hid HEADLAMPS, Interior LED light mod, Scangauge 2, AEM brute force intake, IPOD Integration interface for RER RADIOS, OEM Front end bra.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 18, 2009 9:31 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Feb 24, 2009 11:04 am
Posts: 1257
Location: Pembroke Pines, FL
Im all for a group buy for the sides and back ... Chrome ... That looks awesome. I have orginized group buys in the past with other cars. If its ok with everyone I can handle the group buy ...

_________________
Out - 2008 Jeep Liberty Limited 4x4
In - 2011 Jeep Liberty Carbon Edition http://www.cardomain.com/ride/3972889/2 ... ed-edition


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 18, 2009 11:28 am 
Offline
LOST Addict

Joined: Sat Sep 17, 2005 9:56 am
Posts: 1773
Location: Detroit or Ypsilanti, MI
Awesome. Great mod. (Can it be considered a Mod? lol)

I'd do it but my Jeep already says Cherokee. :P

_________________
Me - '17 KL Trailhawk 4x4, Rhino, P245/65R17 Destination A/Ts, Stock Skids, waiting for mods...
Sis - '18 Cherokee Trailhawk 4x4 - Black - Dents - Scratches - STOCK


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 36 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com