Asfir bumper???

clreinstein · **Posted:** Wed Apr 08, 2009 12:00 am

Does anyone know if the bumper below is available?

JeepinJarhead03 · **Posted:** Wed Apr 08, 2009 12:06 am

looks like they just cut the center section off of the fascia and mounted a fairly normal bullbar with middle mounts?

clreinstein · **Posted:** Wed Apr 08, 2009 12:08 am

JeepinJarhead03 wrote:

looks like they just cut the center section off of the fascia and mounted a fairly normal bullbar with middle mounts?

I mainly liked the bullbar cause you dont lose the factory tow hooks like some brands and the skid plate built into it.

JeepinJarhead03 · **Posted:** Wed Apr 08, 2009 12:13 am

I like it too

reminds me of a properly made Westin

hehe

I love the westin styling, but i was never able to find a full size (non mid bumper level) westin for a KJ

If it's not available anymore, you could probably take a similar bullbar and fabricate the middle mounts to the front of the KJ as well as the skid

and it would either look worse, as good, or better

:lol:

jsc7002 · **Posted:** Wed Apr 08, 2009 12:55 am

I dont know why they wouldnt, Darby has their skids and rock rails, I like the fact that they are aluminum though.

calamaridog · **Posted:** Wed Apr 08, 2009 2:53 am

Try contacting them:

http://www.asfir.com/BranchFullEN.asp?ID=11

info@asfir.com

KJ kyle · **Posted:** Wed Apr 08, 2009 2:59 am

maybe its just me.. but that thing is UGLY

JeepinJarhead03 · **Posted:** Wed Apr 08, 2009 3:01 am

i was checkin out there website, perhaps it's just a language barrier thing

it says, Quality is our second nature

what's their first nature again?? :lol:

they also show tank skids listed as for 04 diesel auto KJ's

and their front skid looks like it comes up farther than mopar's in the front

also show side rails

hard to tell what these products really look like all they have on the site is a schematic

clreinstein · **Posted:** Wed Apr 08, 2009 8:26 am

calamaridog wrote:

Try contacting them:

http://www.asfir.com/BranchFullEN.asp?ID=11

info@asfir.com

I did the contact form on the website as well as the email and never heard back from them.

SweepnChoke · **Posted:** Wed Apr 08, 2009 10:39 am

clreinstein wrote:

JeepinJarhead03 wrote:

looks like they just cut the center section off of the fascia and mounted a fairly normal bullbar with middle mounts?

I mainly liked the bullbar cause you dont lose the factory tow hooks like some brands and the skid plate built into it.

I found with most of the bull bars they list removing the tow hooks for installation because they use the tow hook mounting bolts for the bull bar brackets. However in my experience you can remove the tow hook, install the bracket, re-install the tow hook under the bracket with out issue. I had a mopar tubular bull bar prior to installing the ARB bumper, and that is exactly what I did.

Blue KJ in PA · **Posted:** Wed Apr 08, 2009 11:44 am

Darby got complete ASFIR underbody protection so I'm betting he knows some contact persons...

http://www.lostjeeps.com/forum/phpBB3/vie ... ight=asfir

http://www.lostjeeps.com/forum/phpBB3/pro ... ofile&u=14

DarbyWalters · **Posted:** Thu Apr 09, 2009 1:16 am

Contact Dave at info@asfir.com...

They make some nice stuff. I do not plan on doing with my CRD what i did with my 2002 3.7L so I went with the Aluminum Skids for weight reasons.

Asfir bumper???

Who is online