Auxillary Lamps on stock bumper

KJ in CO · **Joined:** Thu Apr 09, 2009 4:06 pm **Posts:** 346

Are ppl doing this with universal mounts and drilling throught the plastic bumper cover? I like the auxillary lighting but don't have the cash for a new bumper any time soon. Howdja do it??

KJ kyle · **Posted:** Sun Apr 12, 2009 9:47 am

alot of guys just drill through the plastic and put a fender washer on it.. i made a bracket out of some angle iron to mount it to the framework behind the bumper.. it works pretty well

kskj · **Posted:** Sun Apr 12, 2009 10:26 am

On the 02 thru 04 there is steel under the plastic on the bumper and if you look on the bottom side there are two holes one on each side were you can thru bolt them. I did make some brackets to mount mine on so I could move them forward on the bumper.

jeepmedic46 · **Posted:** Sun Apr 12, 2009 11:31 am

Looks good

zzack92 · **Joined:** Mon Jul 28, 2008 6:50 pm **Posts:** 371

how easy are the lights to wire?(Hella 500's) ive wanted to put em on for awhile now but hadnt had the time and also been deciding between making a lightbar and putting em on the bumper

KJ kyle · **Posted:** Sun Apr 12, 2009 8:38 pm

its easy. there is a relay your screw to the fire wall, 3 wires that go from the relay to the switch, 2 wires to each light,and one to the battery. dont even look at the diagram they supply you.. its not even close

zzack92 · **Joined:** Mon Jul 28, 2008 6:50 pm **Posts:** 371

hah alright thanks kyle

Auxillary Lamps on stock bumper

Who is online