It is currently Fri Nov 06, 2026 7:34 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Dlr says I need........
PostPosted: Tue Apr 21, 2009 6:23 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jul 08, 2005 12:31 am
Posts: 1979
Location: Lower NY
Gettin a little play in the front end. 128K on an '03 Rennie. Hardly offroaded. Had the LBJ mod done quite a while ago.
Mounted Revos (which seem to ride harder than stock @ approx 38lbs of air) so I'm not sure if they are just not more susceptible to 'bump steer'.

Anyway, I had the dlr check out the front end. They were just going to do it as part of their "23 point inspection" when they do the oil change (they're free - only reason I go to the Dlr) - I made them put it on the work order separately in case anything went wrong later on (that's why I think they actually checked it out instead of just blowing it off).

They say I need "links (2 @ $62 each) & bushings (2 @ $8 each)" plus labor for a total of $288. "But they aren't that bad".
Anyone know exactly what parts they mean and is this a DIY or is their price reasonable (or BS)?

_________________
My pics!!
'03 Rennie w/all Tupperware
Custom Roof Basket
Mopar Tubular Brush Guard
Garmin GPS V & Laptop w/Nav software
RAM products laptop mount
Maglite w/mount
Rear cargo bay tool cabinet
AllJs Rear Shelf
Rear receiver
250k miles!
LOST #CR051230


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 21, 2009 6:30 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
without more I would say sway bar links and bushings , bushings you can get them from Daystar or Dealer, easy job to install



Time to do 25/30 minutes maybe

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 21, 2009 7:02 pm 
Offline
LOST Addict
User avatar

Joined: Thu Jul 07, 2005 2:11 pm
Posts: 1885
Location: Grand Rapids, MI
Sway bar end links (both quick disco and stock) sold here.

http://jeepinbyal.com/cat-Front_Swaybar ... ts-19.aspx

Did they say what was wrong with the part? Bad bushings? Doubt you need to replacing the links, if the bushings are worn you can buy them separately for $3.50/ea. Not sure how hard it is to press out the bushing and install the new one.

http://jeepinbyal.com/prod-Spherical_Bushing-603.aspx

_________________
2002 Jeep KJ Sport 3.7L 4x4

245/75-16 Mastercraft Courser HSX, 16x7 Cragar, 2" OME MD Lift, ARB Bumper
AEM Brute Force Cold Air Intake, Flowmaster Super 44 Muffler

Currently working on: Full service on transmission & bed-lining ARB bumper

viewtopic.php?f=43&t=84650


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 21, 2009 7:40 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8052
Location: Kentuckeeee
Links could be the tie rod end links?

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 21, 2009 8:01 pm 
Offline
LOST Addict
User avatar

Joined: Thu Jul 07, 2005 2:11 pm
Posts: 1885
Location: Grand Rapids, MI
Did they write down a part number??

_________________
2002 Jeep KJ Sport 3.7L 4x4

245/75-16 Mastercraft Courser HSX, 16x7 Cragar, 2" OME MD Lift, ARB Bumper
AEM Brute Force Cold Air Intake, Flowmaster Super 44 Muffler

Currently working on: Full service on transmission & bed-lining ARB bumper

viewtopic.php?f=43&t=84650


Top
 Profile  
 
 Post subject:
PostPosted: Wed Apr 22, 2009 2:36 am 
Why would they put down a part number?

The fact that they didn't specifically tell him "your swaybar endlinks are FUBAR" tells ThunderbirdJunkie volumes.

Take it to a real shop. Most do free inspections.


Top
  
 
 Post subject:
PostPosted: Wed Apr 22, 2009 10:14 am 
Offline
LOST Member

Joined: Tue Sep 23, 2008 7:31 pm
Posts: 182
Ya man go to a real shop the one I go to they do a 100 point inspection free if i ask them, just part of their service, it gets any shop business cause the majority of cars have something wrong lol, but find a shop you can trust with a good reputation


Top
 Profile  
 
 Post subject:
PostPosted: Wed Apr 22, 2009 4:25 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jul 08, 2005 12:31 am
Posts: 1979
Location: Lower NY
When I brought it in (have to be there by 730 Am so they can start working on it by 9AM!) I asked for the oil/filter change. They called me in to the office at 10Am (I figured it was ready) to tell me it needed plugs (It does) air filter, tuneup, etc (another $250) and the links / bushings ($288). So as soon as I "signed here" they would get started! I said, "Just do the oil, I'll make another appt for the other stuff. Dlr actually had me set an appt for 2 weeks (which I have no intention of keeping) and then I said, Ok, I'll see you in two weeks. He said, "Oh no, since we waited for you to see if you wanted the other stuff done, I'll have him do the oil and filter now."!!

So they hadn't even done the oil & filter yet, which is what I brought it in for because they wanted me to get the other stuff done and were setting up that job!

This "Dlr" used to have a 2nd "service only" facility. They were actually honest and did what was right. Unfortunately the dlr wasn't able to keep them running due to the economy and now you have to go to the main dealership. Total rip off. Usually, I let them tell me what is "wrong" when they do the inspection for the oil change then I take it to Strauss who I have found to actually know what they are doing and have good prices for a 2nd opinion. Strauss actually found some loose front end components after I had a "noise" for over a year when it was new. Tightened a few bolts and no more noise. During the same span of time, Jeep replaced an entire rack and 2 driveshafts under warranty thinking that was causing the noise!!

My work order just says "Links and bushings". I quoted the prices of each in the first post.
Do those prices line up to sway bar links and bushings?

_________________
My pics!!
'03 Rennie w/all Tupperware
Custom Roof Basket
Mopar Tubular Brush Guard
Garmin GPS V & Laptop w/Nav software
RAM products laptop mount
Maglite w/mount
Rear cargo bay tool cabinet
AllJs Rear Shelf
Rear receiver
250k miles!
LOST #CR051230


Top
 Profile  
 
 Post subject:
PostPosted: Wed Apr 22, 2009 7:43 pm 
Offline
LOST Member

Joined: Thu Aug 02, 2007 6:25 pm
Posts: 345
Location: Third Sock From the Run
Wow. Doesn't sound good at all.
My dealer (5 star - Brigham-Gill) is pretty diligent about their service. The owner often greets me when I pull in for service, and they work very hard to make sure I'm happy. Were they to treat me like you describe, I'd go elsewhere and make sure Chrysler knew about their behavior.

_________________
07 Liberty Sport, 245x70r16 Goodyear Silent Armor
02 Wrangler Sahara, 31x10.5r15 Goodyear Silent Armor, ARB Bumper, Patriot Rear Bumper w/tire swing


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com