debadging

phluffhead · **Posted:** Fri May 15, 2009 6:02 pm

how/what is the best way to remove the letter/numbers(3.7L, trailrated, 4x4, etc.)?
are they just glued on or is there rivets in the backside?

tommudd · **Posted:** Fri May 15, 2009 6:42 pm

they are glued on...hair dryer heat them up a little and peel them off, some Glue be gone and then wax

now for the next 75 suggestions which will follow :wink:

2006 KJ · **Posted:** Fri May 15, 2009 8:42 pm

i found the best and easiest way to do it was to mix up a bowl of mashed potato's (i used the instant kind but the real ones may work better).. cover the emblems you wish to remove with the mash'ed potato's. let them on there for.. 3 or 4 mins then rinse with a hose.. the emblems should rinse off with the mashed potato's.

suero · **Posted:** Fri May 15, 2009 10:25 pm

if you teke off the trailrated, send it to me...... :wink:

I did the same as Tom.

phluffhead · **Posted:** Sat May 16, 2009 6:21 am

plastic putty knife and goo be gone, no trace and still a nice orangey smell

trailrated badge?arent they like 2 bucks or so?would cost more to mail it

potatoes?im not from pa, id rather just scrape em off with a tree,lol

HoosierJeeper · **Joined:** Sun Feb 15, 2009 8:23 am **Posts:** 1218

2006 KJ wrote:

i found the best and easiest way to do it was to mix up a bowl of mashed potato's (i used the instant kind but the real ones may work better).. cover the emblems you wish to remove with the mash'ed potato's. let them on there for.. 3 or 4 mins then rinse with a hose.. the emblems should rinse off with the mashed potato's.

Now I'm hungry...why waste good mashed potatos??? I've heard WD-40 and a putty knife work....

timmyb457 · **Posted:** Mon May 18, 2009 7:48 am

use a hair dryer like Tom said to warm up the glue but i've always used dental floss behind it after it was warmed up

debadging

Who is online