It is currently Sun Oct 25, 2026 10:38 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 83 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
Author Message
 Post subject:
PostPosted: Wed Jun 03, 2009 4:06 pm 
Offline
LOST Newbie
User avatar

Joined: Sun Nov 09, 2008 2:07 pm
Posts: 81
Location: Concord, NH
jsc7002 wrote:
I wouldnt mess with RC, if you have to go cheap and do a spacer go with Daystar from Bouldbers, but if you want something that will last, and ride and handle better call Dirk at DPG Off-Road (316-776-9900) and tell him you would like to order some OME HD coils for the KJ front and rear and then call Heater at Boulderbars and tell her you would like to order the Ranchos shocks and struts for the KJ, all said and done it should be around $650, and then post up in your section and have a lift party.


if I did something like that, Would that be considering shipping costs to? and will a Jeep dealership be able to install that? Other then some wranglers, i don't know many Jeep owners up here who are up for modding there jeeps. I'm just starting to get into exploring with my KJ. I'm thinking about taking it to a small jeep dealership my parents have done work with in the past, whos a RC dealer, and said he can give me a quote if I give him specs and prices.


I guess because all this is new to me I'd love it to be something simple, but I also want to do things the right way since its my daily driver. and I need to use it to go to college week as well as drive to work every day.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 4:11 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon May 22, 2006 6:28 pm
Posts: 3880
Location: Wichita/ Pittsburg, Kansas
Yes that would be including shipping, IIRC I paid about $670 for everything and shipping, and then I just read any and every lift write-up I could find for the KJ and did it myself in my garage in a day with the help of my dad, and neither one of us had ever done any suspension work before, its pretty easy and straight forward.

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 4:20 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Spacer lifts you use your old springs which if they have over 30,000 miles are pretty much junk anyways
Jeep dealerships will charge you an arm and two legs to do a simple lift. Not worth it in my book
RC=junk in the long run, read through how many have had spcer type lifts and then had to swap everything out later, not worth it again in the long run.

What you need to "upgrade" your suspension is 4 new coils and 4 new shocks
for instance
2 OME 927s for the front
2 OME 948s for the rear
2 Rancho RSX17505 for front shocks
2 Rancho RSX17004 for the rear also Teraflex front bumpstops

You can get other springs like Rustys and they will give you lift for a while but they sag badly, and they are only rated at 310 lbs about the same as stock which are rated at 300 to 320 depending on options

If you wanted to go with a spacer lift you would still want to change out the shocks so for a little bit more you have a whole new , much better riding and handeling KJ :wink:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 4:23 pm 
Offline
LOST Newbie
User avatar

Joined: Sun Nov 09, 2008 2:07 pm
Posts: 81
Location: Concord, NH
jsc7002 wrote:
Yes that would be including shipping, IIRC I paid about $670 for everything and shipping, and then I just read any and every lift write-up I could find for the KJ and did it myself in my garage in a day with the help of my dad, and neither one of us had ever done any suspension work before, its pretty easy and straight forward.


I'll definitely keep that in mind, I had thought special tools were necessary to install a suspension lift. I may end up just having this small jeep dealership do it, Hes a good guy and I think hes one of the few around here that isn't going to close this fall.

But i've written down the information you gave me in the previous post, so I can look into it more..But If i do decide to go with what you suggested, How much lift is that going to give me? do OME coils come in one size? And how much work is it to install a lift manually? I thought it needed special tools?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 4:28 pm 
Offline
LOST Newbie
User avatar

Joined: Sun Nov 09, 2008 2:07 pm
Posts: 81
Location: Concord, NH
tommudd wrote:
Spacer lifts you use your old springs which if they have over 30,000 miles are pretty much junk anyways
Jeep dealerships will charge you an arm and two legs to do a simple lift. Not worth it in my book
RC=junk in the long run, read through how many have had spcer type lifts and then had to swap everything out later, not worth it again in the long run.

What you need to "upgrade" your suspension is 4 new coils and 4 new shocks
for instance
2 OME 927s for the front
2 OME 948s for the rear
2 Rancho RSX17505 for front shocks
2 Rancho RSX17004 for the rear also Teraflex front bumpstops

You can get other springs like Rustys and they will give you lift for a while but they sag badly, and they are only rated at 310 lbs about the same as stock which are rated at 300 to 320 depending on options

If you wanted to go with a spacer lift you would still want to change out the shocks so for a little bit more you have a whole new , much better riding and handeling KJ :wink:


Its starting to sound like spacer lift is something I don't want. What you suggested with the OME Coils and the Rancho shocks, is similiar to what JSC suggested to buy? But he mentioned struts as well?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 4:31 pm 
Offline
LOST Newbie
User avatar

Joined: Sun Nov 09, 2008 2:07 pm
Posts: 81
Location: Concord, NH
Alright, Im starting to rethink having a dealership do it.. if I do get the suggested OEM and Rancho struts\shocks how much of a lift will that be?

Or maybe a better question is, Since right now Im stock anything new will be better (otherwise I have other issues). But If i just replace the springs shocks and struts (which im guessing I already stock) will it just give me an inch or two over stock?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 4:32 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 06, 2007 10:13 am
Posts: 1118
Location: DFW, TX
Cpike wrote:
tommudd wrote:
Spacer lifts you use your old springs which if they have over 30,000 miles are pretty much junk anyways
Jeep dealerships will charge you an arm and two legs to do a simple lift. Not worth it in my book
RC=junk in the long run, read through how many have had spcer type lifts and then had to swap everything out later, not worth it again in the long run.

What you need to "upgrade" your suspension is 4 new coils and 4 new shocks
for instance
2 OME 927s for the front
2 OME 948s for the rear
2 Rancho RSX17505 for front shocks
2 Rancho RSX17004 for the rear also Teraflex front bumpstops

You can get other springs like Rustys and they will give you lift for a while but they sag badly, and they are only rated at 310 lbs about the same as stock which are rated at 300 to 320 depending on options

If you wanted to go with a spacer lift you would still want to change out the shocks so for a little bit more you have a whole new , much better riding and handeling KJ :wink:


Its starting to sound like spacer lift is something I don't want. What you suggested with the OME Coils and the Rancho shocks, is similiar to what JSC suggested to buy? But he mentioned struts as well?


Yes. That is exactly what jsc had suggested. It should run you around $650 for all of the pieces combined. And there are several write-ups her on how to install it yourself. It is really pretty easy. Just takes a little time.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...
Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 4:33 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon May 22, 2006 6:28 pm
Posts: 3880
Location: Wichita/ Pittsburg, Kansas
the only 'special tool' needed would be a spring compressor and you can rent them, I rented one and it was like $40 but you get it back when you return the compressor.

the OME coils come in light duty, medium duty and heavy duty, light duty is about the same as your OEM coils as far as spring rate and HD is for winch and bumpers, which I dont have and several others but I still went with the HD, it isnt a harsh ride at all or anything. You will also need the basic hand tools, wrenches, sockets...I did my lift ALL by hand no power tools no air tools. You can also take the OEM and the new OME coils to most auto shops and they should be able to disassemble the old and reassemble using the new parts for you and it shouldnt cost too much.

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 4:40 pm 
Offline
LOST Newbie
User avatar

Joined: Sun Nov 09, 2008 2:07 pm
Posts: 81
Location: Concord, NH
Alright, Im starting to rethink having a dealership do it.. if I do get the suggested OEM and Rancho struts\shocks how much of a lift will that be?

Or maybe a better question is, Since right now Im stock anything new will be better (otherwise I have other issues). But If i just replace the springs shocks and struts (which im guessing I already stock) will it just give me an inch or two over stock?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 4:41 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Cpike wrote:
tommudd wrote:
Spacer lifts you use your old springs which if they have over 30,000 miles are pretty much junk anyways
Jeep dealerships will charge you an arm and two legs to do a simple lift. Not worth it in my book
RC=junk in the long run, read through how many have had spcer type lifts and then had to swap everything out later, not worth it again in the long run.

What you need to "upgrade" your suspension is 4 new coils and 4 new shocks
for instance
2 OME 927s for the front
2 OME 948s for the rear
2 Rancho RSX17505 for front shocks
2 Rancho RSX17004 for the rear also Teraflex front bumpstops

You can get other springs like Rustys and they will give you lift for a while but they sag badly, and they are only rated at 310 lbs about the same as stock which are rated at 300 to 320 depending on options

If you wanted to go with a spacer lift you would still want to change out the shocks so for a little bit more you have a whole new , much better riding and handeling KJ :wink:


Its starting to sound like spacer lift is something I don't want. What you suggested with the OME Coils and the Rancho shocks, is similiar to what JSC suggested to buy? But he mentioned struts as well?



KJs have 4 shocks no struts although a lot of people call the front ones struts since they sit inside pf a spring like a strut does :wink:

All I have done to date I just run them up to a local mom and pop garage and they compress the springs for me, 10/15 minutes and they hand them back :wink: If you have any basic knowlede you can install a lift with reading on here and / or calling one of us. Which several have called me before they got theirs done :lol: :lol: :lol: :lol:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 4:47 pm 
Offline
LOST Newbie
User avatar

Joined: Sun Nov 09, 2008 2:07 pm
Posts: 81
Location: Concord, NH
I wonder how long it would take me to drive to Ohio....:D lol I wish there were more KJ's in my neck of the woods who did this kind of thing.

And what exactly does....
2 Rancho RSX17004 for the rear also Teraflex front bumpstops
mean? Teraflex front bumpstops are what?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 4:48 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Cpike wrote:
Alright, Im starting to rethink having a dealership do it.. if I do get the suggested OEM and Rancho struts\shocks how much of a lift will that be?

Or maybe a better question is, Since right now Im stock anything new will be better (otherwise I have other issues). But If i just replace the springs shocks and struts (which im guessing I already stock) will it just give me an inch or two over stock?


With just doing the shocks / springs you will get about 2.5 inches over what it was new. so you may end up with say 2.75 or 3 from where you are now depending on how bad your springs are, its all hard to tell since each is different. You can also do what we call a clevis lift for an extra 1/4 to 1/2 inch and then you can also install a flat top plate for more. If you look at a current post asking people to list their height and what kind of lift they have you will see quite a difference

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 6:06 pm 
Offline
LOST Member

Joined: Thu Aug 02, 2007 6:25 pm
Posts: 345
Location: Third Sock From the Run
It also kinda depends upon the dealership... some are more mod-oriented than others. In general, having the dealership do a mod like a lift is going to meet with all kinds of flak about it.
And as you're starting to figure out, for the money you spend on a spacer kit, and keeping your old springs, you're a lot better off with new springs! It's not that much more cash for new springs, and it doesn't make your old, sagging coils worse.

_________________
07 Liberty Sport, 245x70r16 Goodyear Silent Armor
02 Wrangler Sahara, 31x10.5r15 Goodyear Silent Armor, ARB Bumper, Patriot Rear Bumper w/tire swing


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 6:19 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
whoops never mind :roll:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Last edited by tommudd on Wed Jun 03, 2009 6:22 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 6:20 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Cpike wrote:
I wonder how long it would take me to drive to Ohio....:D lol I wish there were more KJ's in my neck of the woods who did this kind of thing.

And what exactly does....
2 Rancho RSX17004 for the rear also Teraflex front bumpstops
mean? Teraflex front bumpstops are what?


2 Rancho RSX17004 rear shocks
Teraflex bumpstops to replace the stock front bumpstops

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 7:20 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon May 15, 2006 9:18 pm
Posts: 487
Location: Athens, GA
where is the best place on line to get the rancho shocks, etc.

_________________
"Keep the shiny side up and the oily side down"
'06 4X4 KJ, skid plates, Daystar lift, Wrangler MT/R 245/75/16, Reese hitch, Surco Safari Rack/Hella 500's, Cobra 75 wxst/Wilson 4' Firestick, Optima Red Top, Pilot fog lights, Detours KJ Backbone/Smittybilt XRC8 winch, Spidertrax spacers.

'04 Harley-Davidson Road King FLHRI Bagger


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 7:40 pm 
Offline
LOST Addict
User avatar

Joined: Thu Jul 19, 2007 3:52 pm
Posts: 1184
Location: Atlanta, GA
Follow Tom's lead. The only place where he and I will disagree is on the Rancho over the OME "shocks" (front and back) but both should work great. :)

Do the work yourself, it is part of the hobby... :wink:

_________________
Colin
LOST#85291
"Blue Bunny"
04 KJ Sport 3.7L AT 4x4
Steel IFS/DL&DTT/4.10s/Tow Pkg/Mopar-Rusty's-Skid Row skids&sliders/OME struts&springs/Rancho shocks/Terraflex bumpstops/Landy FRH/Gen Steel/Grabber AT2s/Spidertrax/Rockcrusher/Hella/Smittybilt XRC8/Bulldog wiring/NAPA brakes/JBA UCAs&spacers/Deka Intimidator


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 7:49 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Nov 19, 2008 11:45 pm
Posts: 384
Location: Montana (Rocky Mountain Side)
Cobolt-60 wrote:
Follow Tom's lead. The only place where he and I will disagree is on the Rancho over the OME "shocks" (front and back) but both should work great. :)

Do the work yourself, it is part of the hobby... :wink:


Yep, and once you tear into once it'll make it that much easier to tear into the next time.... which once you start it never really stops, so how many conduit nuts do you actually have now Tom?

_________________
05 o|||||||o Liberty 4x4 Patriot Blue w/Custom Black Trim
Kenwood Excellon KDC-X693 w/Alpine 500w AMP Bridged dual Alpine Subs
Frankenlift I w/Extra Isolator - ARB with Warn M8000
Goodyear Duratrac's 245/75/R16 on Cregar soft 8's, Full Skids


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 8:22 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
tumanator wrote:
Cobolt-60 wrote:
Follow Tom's lead. The only place where he and I will disagree is on the Rancho over the OME "shocks" (front and back) but both should work great. :)

Do the work yourself, it is part of the hobby... :wink:


Yep, and once you tear into once it'll make it that much easier to tear into the next time.... which once you start it never really stops, so how many conduit nuts do you actually have now Tom?


How many conduit nuts , I could tell but she would be upset if I told all of her secrets.

Ranchos can be bought at a vairty of off road shops, your local parts stores, AllJs etc. and guess what they have a lifetime warranty, which OME does not :lol:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 03, 2009 8:38 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Nov 19, 2008 11:45 pm
Posts: 384
Location: Montana (Rocky Mountain Side)
tommudd wrote:
tumanator wrote:
Cobolt-60 wrote:
Follow Tom's lead. The only place where he and I will disagree is on the Rancho over the OME "shocks" (front and back) but both should work great. :)

Do the work yourself, it is part of the hobby... :wink:


Yep, and once you tear into once it'll make it that much easier to tear into the next time.... which once you start it never really stops, so how many conduit nuts do you actually have now Tom?


How many conduit nuts , I could tell but she would be upset if I told all of her secrets.

Ranchos can be bought at a vairty of off road shops, your local parts stores, AllJs etc. and guess what they have a lifetime warranty, which OME does not :lol:


:roll: :lol: somehow i knew i was gonna get that answer...... again

_________________
05 o|||||||o Liberty 4x4 Patriot Blue w/Custom Black Trim
Kenwood Excellon KDC-X693 w/Alpine 500w AMP Bridged dual Alpine Subs
Frankenlift I w/Extra Isolator - ARB with Warn M8000
Goodyear Duratrac's 245/75/R16 on Cregar soft 8's, Full Skids


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 83 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com