So it's been over five weeks without my KJ (stupid deployment ) and I can't help but start planning the additional modifications for her when I get back. While I'm happy with the lift I have, I'm looking to squeeze a little more height out of her. I currently have OME H/D Coils (Front & Rear), Rancho Shocks/Struts (Front & Rear), and DayStar & TerraFlex Extended Bump Stops (Front & Back). What additional parts can I install to increase the lift? Thanks for the help in advance!

_________________
http://www.cardomain.com/ride/3225256

You can add a clevis lift in the front and a couple of ISO pads in the rear.

_________________
Blood Clot Red 03 Punisher Edition
245/75-16 Duratracs, Soft 8's, Ironman/clevis Lift, Monroe Sensa-trac rear shocks, JBA 3.5, GTP Hood Louvers, Roof Basket & Light bar, Mudd's Garage Rear Bumper
custom made items: cross rails, grill inserts, cargo shelf, lightbar, pin stripping & rock rails.
L.O.S.T. #DW090501

Or there is the cradel drop about 1/2in in the front

_________________
05 KJ Limited (fully loaded)
2.5in Daystar front spacer/OME HD rear coils
Rancho RSX shocks
31x10.5x15 BFG AT on black steels
Front and rear tow hooks
Polk audio db6501 full range speakers and tweeters
12" Kicker Comp CVR sub

Cradle drop doesn't add lift.

_________________
Former CRD owner... now I just sit around and stare at the wall.

But It will give you more clearance for bigger tires thus= more lift. and happier CV angles

_________________
2003 limited 3.7L V6
Vader Edition

http://www.cardomain.com/ride/3219059

Thanks for the suggestions! I'll definitely have to explore these ideas when I get back to get some bigger tires.

_________________
http://www.cardomain.com/ride/3225256

But the biggest tire the front diff can handle can already fit without a cradle drop.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

Where are you at?

_________________
Recon bumper w/ XRC8000 winch, RL Super Skinks, Custom RL HD Komodo rear
Skid Row engine and trans skids, RL gas tank skid, Crane diff cover
Defender rack w/ KC Slimlites, Smitybilt I Rack system
Frankenlift II Premium (CRD Upgrade)+1 iso, Jeepin by Al 4.5 A arms
16x8 KMC Enduro XDs, 265/75 16 Goodyear Duratracs
Air Flow snorkel

Our UCA's are not attached to the cradle so the entire suspension assembly does not drop as it does on most other rigs. The cradle drop has minimal effect other than chagning the angles between the upper and lower control arms (not to mention making your balljoints unhappy). Not a productive mod unless you extend the knuckles and keep the factory geometry.

_________________
Former CRD owner... now I just sit around and stare at the wall.