It is currently Sun Nov 08, 2026 6:32 pm

View unanswered posts | View active topics


Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » General Discussions

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Print view Previous topic | Next topic 
Author Message
0311_DoC
 Post subject: GGGRRRR someone up there hates me....
PostPosted: Wed Jul 08, 2009 4:54 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Dec 30, 2005 10:26 pm
Posts: 2133
Location: Sin City USA
So i am tightening the bolts back up on the tranny pan and the service manual says 105 torque the bolt snapped at like maybe 70 ? now what the heck do i do????

_________________
2016 JKU RUBICON

other mods coming soon...
Top
 Profile  
 
Jeepjeepster
 Post subject:
PostPosted: Wed Jul 08, 2009 6:23 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8052
Location: Kentuckeeee
Sure thats not 105 INCH lbs???? Read about that all the time.

Did it break flush? If youre not comfortable drilling/tapping the bolt out take it to a shop and have them do it.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster
Top
 Profile  
 
2006 KJ
 Post subject:
PostPosted: Wed Jul 08, 2009 6:25 pm 
Offline
LOST Addict

Joined: Mon Sep 04, 2006 10:12 pm
Posts: 2476
Location: Jamestown PA
if you can take the pan off and get on the bolt with some vice grips that could work as well.

_________________
2006 Renegade. Completely stock.
Top
 Profile  
 
jeepskate
 Post subject:
PostPosted: Wed Jul 08, 2009 6:54 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Sep 30, 2006 10:20 pm
Posts: 502
Location: Corona, CA
Yikes, yeah, that's 105 inch-pounds. (8.75 foot-pounds). Ouch! Something like this should get it out:

http://www.amazon.com/gp/product/B00062ZDF4

_________________
2002 KJ (un)Limited 4x4: OME HD lift, ARB bullbar, Warn 4X flood lights, Skid Row tranny skid, Mopar engine, transfer case and fuel tank skids, Boulder Bars, 245/75/16 Goodyear Duratracs on Moab wheels.
Top
 Profile  
 
JL Rockies
 Post subject:
PostPosted: Wed Jul 08, 2009 8:11 pm 
Offline
LOST Addict
User avatar

Joined: Mon Jan 29, 2007 12:54 am
Posts: 3865
Location: Draper, UT
Do you suffer from a persecution complex?

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.
Top
 Profile  
 
0311_DoC
 Post subject:
PostPosted: Wed Jul 08, 2009 8:45 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Dec 30, 2005 10:26 pm
Posts: 2133
Location: Sin City USA
JL Rockies wrote:
Do you suffer from a persecution complex?


probably...

_________________
2016 JKU RUBICON

other mods coming soon...
Top
 Profile  
 
0311_DoC
 Post subject:
PostPosted: Wed Jul 08, 2009 8:47 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Dec 30, 2005 10:26 pm
Posts: 2133
Location: Sin City USA
Jeepjeepster wrote:
Sure thats not 105 INCH lbs???? Read about that all the time.

Did it break flush? If youre not comfortable drilling/tapping the bolt out take it to a shop and have them do it.


yea it broke flush all I have left is the head of the bolt...

_________________
2016 JKU RUBICON

other mods coming soon...
Top
 Profile  
 
0311_DoC
 Post subject:
PostPosted: Wed Jul 08, 2009 8:48 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Dec 30, 2005 10:26 pm
Posts: 2133
Location: Sin City USA
jeepskate wrote:
Yikes, yeah, that's 105 inch-pounds. (8.75 foot-pounds). Ouch! Something like this should get it out:

http://www.amazon.com/gp/product/B00062ZDF4


yea it wasnt even that much before it busted ...

_________________
2016 JKU RUBICON

other mods coming soon...
Top
 Profile  
 
Boiler
 Post subject:
PostPosted: Wed Jul 08, 2009 10:15 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jan 30, 2009 12:38 am
Posts: 1593
Location: Muncie Indiana
google EZ Out or easy out...not sure which.

Basically you drill a hole in the fastener end, and then this thing screws into that hole, but it is a cross threaded screw. Keep screwing in, and the bolt turns the right way to come out.

_________________
2005 KJ Renegade
Fabrications for sale: Aluminum Roof Rack (See Page 9)
Aluminum Gas Tank Skid -- Radiator Skid -- Front Strut Shims
Coming Soon: Rear Bumpers with lots of options
Top
 Profile  
 
tjkj2002
 Post subject:
PostPosted: Wed Jul 08, 2009 10:41 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
0311_DoC wrote:
jeepskate wrote:
Yikes, yeah, that's 105 inch-pounds. (8.75 foot-pounds). Ouch! Something like this should get it out:

http://www.amazon.com/gp/product/B00062ZDF4


yea it wasnt even that much before it busted ...
If it busted before you reached 8lbs-ft or torque it most likely was crossthreaded,prepare for the worst and figure in the cost of drilling it out to the next size and adding a helicoil or a new trans.
Top
 Profile  
 
Guest
 Post subject:
PostPosted: Thu Jul 09, 2009 12:54 am 
If you manage to get it out...make sure you get a new pan...because if you actually torqued that bolt to 105 ft lb, that pan is fubar.
Top
  
 
icarl
 Post subject:
PostPosted: Thu Jul 09, 2009 2:32 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed May 20, 2009 12:19 pm
Posts: 255
Location: The Village
ThunderbirdJunkie wrote:
"custom Realtree pinstriping"


tbj is that "custom Realtree pinstriping" or "real tree scraping" :lol:

_________________
Car Domain
Jeep Liberty (KJ) - 2002
Top
 Profile  
 
Guest
 Post subject:
PostPosted: Thu Jul 09, 2009 2:33 am 
Aren't they the same? :lol:
Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » General Discussions

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management