Just a quick question...

my hazard light switch i think is about to die.... it does not turn off unless i push it down really hard.. i mean i have to put alot of force on the button in order for the button to 'click' in.

my question is has anyone else had this problem? and how hard are they to replace?

thanks

_________________
2003 Jeep Liberty Sport 4x4

245/75/16 Good Year DuraTracs, 2" BDS Suspension Kit with Rancho RSX17505 Struts in the front, Teraflex Extended Bumpstops, Daystar Extended Bumpstops, JBA 4.5 Gen Upper Control Arms

Westin Brush Guard, 2 Hella 500 Lights mounted

Yep my neighbor did, same exact problem. I popped it out and with compressed air blew out all the crud that made its way in there. Now it works like new. Or yours could just be going out the door...........

Try blowing it with air first if that does n't work
here is one on e-bay for 20 $

http://cgi.ebay.com/ebaymotors/2002-07- ... ccessories

or hit the local junkyard.
In any case get yourself a spare before this one dies out on you.

_________________
It only takes one man to place a trail..

thanks for the reply guys... ill do the air thing first. hopefully that will work.

when i do take it out.. i assume i haver to take apart the dash? or is there another way?

_________________
2003 Jeep Liberty Sport 4x4

245/75/16 Good Year DuraTracs, 2" BDS Suspension Kit with Rancho RSX17505 Struts in the front, Teraflex Extended Bumpstops, Daystar Extended Bumpstops, JBA 4.5 Gen Upper Control Arms

Westin Brush Guard, 2 Hella 500 Lights mounted

Have to take the dash apart.

is that easy or hard to do? anyone have any suggestions to make my life easy when i take the dash apart. lol

_________________
2003 Jeep Liberty Sport 4x4

245/75/16 Good Year DuraTracs, 2" BDS Suspension Kit with Rancho RSX17505 Struts in the front, Teraflex Extended Bumpstops, Daystar Extended Bumpstops, JBA 4.5 Gen Upper Control Arms

Westin Brush Guard, 2 Hella 500 Lights mounted

Just clips and be careful/gentle when pryin off/out. Very simple really.