Reverse Lighting

JeepinJarhead03 · **Posted:** Sun Nov 08, 2009 11:00 pm

I used LED's in my backup lights from here

http://autolumination.com/

they worked very well and lit up better than any stock location backup lights on any vehicle i've ever owned - until i mounted a rear bumper with tube tail light guards - now they're partially behind one of the sections of tube

hyedipin · **Joined:** Thu May 11, 2006 10:20 am **Posts:** 1667

JeepinJarhead03 wrote:

I used LED's in my backup lights from here

http://autolumination.com/

they worked very well and lit up better than any stock location backup lights on any vehicle i've ever owned - until i mounted a rear bumper with tube tail light guards - now they're partially behind one of the sections of tube

Hey Jarhead,
I actually saw your other topic, and I asked the same question:
Which one of these did you buy (I saw your rear headlights picture.

) http://autolumination.com/3157_3156.htm There is a whole laundry list of lights here...

LIV42DY · **Posted:** Sun Nov 08, 2009 11:52 pm

easy and clean install.

JeepinJarhead03 · **Posted:** Mon Nov 09, 2009 12:30 am

hyedipin wrote:

JeepinJarhead03 wrote:

I used LED's in my backup lights from here

http://autolumination.com/

they worked very well and lit up better than any stock location backup lights on any vehicle i've ever owned - until i mounted a rear bumper with tube tail light guards - now they're partially behind one of the sections of tube

Hey Jarhead,
I actually saw your other topic, and I asked the same question:
Which one of these did you buy (I saw your rear headlights picture.

) http://autolumination.com/3157_3156.htm There is a whole laundry list of lights here...

I'm sorry I must have totally missed your question on the other thread

the backup lights i used were 3156 super white SMT Tower 48's (20mm x 52mm)

hyedipin · **Joined:** Thu May 11, 2006 10:20 am **Posts:** 1667

[quote="JeepinJarhead03"

the backup lights i used were 3156 super white SMT Tower 48's (20mm x 52mm)[/quote]

No problem.. Wow, those are $60/pair after shipping, more expensive than a pair of lights. But they gotta be pretty darn bright with 60 LEDs on them.
Can you post a picture of the area they illuminate with your camera from a distance?

tpcosta · **Posted:** Mon Nov 09, 2009 7:59 am

These work great if you have a hitch, I think they are made by a company called white night.

JeepinJarhead03 · **Posted:** Mon Nov 09, 2009 5:01 pm

camera sucks but i think this was the best shot i've got before the bumper went on

hyedipin · **Joined:** Thu May 11, 2006 10:20 am **Posts:** 1667

Yes, I remember seeing it, but do you have anything from another side, not right up against the jeep, but opposite direction so we can see how much it illuminates.

JeepinJarhead03 · **Posted:** Mon Nov 09, 2009 6:56 pm

not that i recall, my camera phone is pretty cheesy and now there's tube tail light guards which pretty much cover them, however even with the guards blocking probably 75% of their output they're still better than they were stock

my bumper has built in spots on either corner inside the bumper for mounting fairly large rectangular aux lights for backup lights i just havent gotten around to getting any of those put in yet

hyedipin · **Joined:** Thu May 11, 2006 10:20 am **Posts:** 1667

Ah, I see. No problem. Your license plate light is also pretty bright.

Reverse Lighting

Who is online