THE OHIO CHAT ROOM!!!

Diggerfreek · **Posted:** Wed Dec 16, 2009 11:12 pm

I've got more then half as many post as you do in less time :wink:

tommudd · **Posted:** Wed Dec 16, 2009 11:15 pm

Diggerfreek wrote:

I've got more then half as many post as you do in less time :wink:

This is true but I was very shy and quiet for the first two years or so. Just came on and would read for hours soaking in all of the knowledge I could. :wink:

That was also before I was so hooked, I think there are some kind of brain waves coming from LOST. I was never this hooked on drugs :shock:

Diggerfreek · **Posted:** Wed Dec 16, 2009 11:17 pm

tommudd wrote:

Diggerfreek wrote:

I've got more then half as many post as you do in less time :wink:

This is true but I was very shy and quiet for the first two years or so. Just came on and would read for hours soaking in all of the knowledge I could. :wink:

That was also before I was so hooked, I think there are some kind of brain waves coming from LOST. I was never this hooked on drugs :shock:

Aye

It must be my avy that is making us addicted :shock:

tommudd · **Posted:** Wed Dec 16, 2009 11:26 pm

trying to find a 4 inch maybe 4.5 inch hole saw, anyone have one?
Need to make some holes in metal , ....on a KJ.......can not say where.......one per side......... :wink:

Diggerfreek · **Posted:** Wed Dec 16, 2009 11:28 pm

tommudd wrote:

trying to find a 4 inch hole saw, anyone have one?
Need to make some holes in metal , ....on a KJ.......can not say where.......one per side......... :wink:

wonder why :shock:

Try homedepot :wink:

tommudd · **Posted:** Wed Dec 16, 2009 11:29 pm

Diggerfreek wrote:

tommudd wrote:

trying to find a 4 inch hole saw, anyone have one?
Need to make some holes in metal , ....on a KJ.......can not say where.......one per side......... :wink:

wonder why :shock:

Try homedepot :wink:

They may have one, afraid to go to the one close here, some group is Boycotting them for some reason!

H0USE34 · **Posted:** Wed Dec 16, 2009 11:30 pm

tommudd wrote:

Diggerfreek wrote:

tommudd wrote:

trying to find a 4 inch hole saw, anyone have one?
Need to make some holes in metal , ....on a KJ.......can not say where.......one per side......... :wink:

wonder why :shock:

Try homedepot :wink:

They may have one, afraid to go to the one close here, some group is Boycotting them for some reason!

You have a metal bumper... :twisted:

tommudd · **Posted:** Wed Dec 16, 2009 11:34 pm

H0USE34 wrote:

tommudd wrote:

Diggerfreek wrote:

tommudd wrote:

trying to find a 4 inch hole saw, anyone have one?
Need to make some holes in metal , ....on a KJ.......can not say where.......one per side......... :wink:

wonder why :shock:

Try homedepot :wink:

They may have one, afraid to go to the one close here, some group is Boycotting them for some reason!

You have a metal bumper... :twisted:

Yes but its got enough holes in it, I'm going through thinner metal than an ARB! more like ...body parts :twisted:

Diggerfreek · **Posted:** Wed Dec 16, 2009 11:46 pm

tommudd wrote:

H0USE34 wrote:

tommudd wrote:

Diggerfreek wrote:

tommudd wrote:

trying to find a 4 inch hole saw, anyone have one?
Need to make some holes in metal , ....on a KJ.......can not say where.......one per side......... :wink:

wonder why :shock:

Try homedepot :wink:

They may have one, afraid to go to the one close here, some group is Boycotting them for some reason!

You have a metal bumper... :twisted:

Yes but its got enough holes in it, I'm going through thinner metal than an ARB! more like ...body parts :twisted:

OH SNAP

tommudd · **Posted:** Wed Dec 16, 2009 11:52 pm

makes ya wonder

needing to have two 4.5 inch holes, one on either side

mmmmm

dual exhaust stacks maybe up through the roof

dual snorkels :shock:

dual .......4.5 inch air intakes in the hood
err wait already have holes in the hood :roll:

03CDKJ · **Posted:** Wed Dec 16, 2009 11:54 pm

tommudd wrote:

makes ya wonder

needing to have two 4.5 inch holes, one on either side

mmmmm

dual exhaust stacks maybe up through the roof

dual snorkels :shock:

dual .......4.5 inch air intakes in the hood
err wait already have holes in the hood :roll:

Dual snorkels! :lol:

LOVE IT!

tommudd · **Posted:** Wed Dec 16, 2009 11:56 pm

I think dual snorks would be cool looking, only thing I don't like about them , makes any vehicle look uneven

GOOD NIGHT IRENE :wink:

Diggerfreek · **Posted:** Thu Dec 17, 2009 12:12 am

Dual stacks is my vote!!!!!!!!!!!!!!!!

:twisted:

H0USE34 · **Posted:** Thu Dec 17, 2009 1:51 am

Dual stacks would certainly help with the being the Biggest and the Baddest KJ in Ohio.

rokee1998 · **Posted:** Thu Dec 17, 2009 7:35 am

Its 0634 hours, I am at work, it's cold outside, the locomotives are killing the mosquito population for 2010, I'm violating the no smoking law in my office, and everyone else is asleep :roll:

tommudd · **Posted:** Thu Dec 17, 2009 8:04 am

Its 7:03 right now, already been working for 30 minutes plus, ( real office work) was terrible getting to work this AM :roll:

So Rokeee going to repair the beast today and show her who is the BOSS!
Hate to see you go Loco over a Loco

Dang I am the only registered user on here right now!

rokee1998 · **Posted:** Thu Dec 17, 2009 8:09 am

Hope fully the part will be in today, it's easy to replace 8 3/4 bolts and a gasket, if they don't come thru on my bonus, I will have to leave as a matter of principle, my bonus is 10% of my quarterly salary, like getting an extra paycheck once a qtr

tommudd · **Posted:** Thu Dec 17, 2009 8:47 am

rokee1998 wrote:

Hope fully the part will be in today, it's easy to replace 8 3/4 bolts and a gasket, if they don't come thru on my bonus, I will have to leave as a matter of principle, my bonus is 10% of my quarterly salary, like getting an extra paycheck once a qtr

10% of regular salary before or after taxes? Dang that would be nice for sure! Just fiqured what mine would be if I got something like that WOW!!
You get a bonus ( hopefully) and 5 of us were told we make too much! What a different world. Our problem is we are making as much as our supervisors and they don't like that. But they also don't have to travel, go out of the office, do tons of paperwork nor go through apartments that stink to high heaven!

have a good day Dustin! I am heading out to a property

TAHOE · **Posted:** Thu Dec 17, 2009 9:32 am

Bonus would be nice. My company used to give us all our "earned" vacation on Jan1, I'm up to 4 weeks. now they changed that and we have to earn it quarterly so I worked this whole year to earn ziltch in vacation. Then we got our 401 company profit sharing within the 1st quarter, now it goes in separately each month. They are screwing us at every turn. took away a floating holiday. Oh, and most likely no raise this year either!
GuessI can lok on bright side though, I'm bringing in a paycheck.
I hate being sick... still have sore throat and can't breath!!!... and still have to be in at work

rokee1998 · **Posted:** Thu Dec 17, 2009 9:52 am

tommudd wrote:

rokee1998 wrote:

Hope fully the part will be in today, it's easy to replace 8 3/4 bolts and a gasket, if they don't come thru on my bonus, I will have to leave as a matter of principle, my bonus is 10% of my quarterly salary, like getting an extra paycheck once a qtr

10% of regular salary before or after taxes? Dang that would be nice for sure! Just fiqured what mine would be if I got something like that WOW!!
You get a bonus ( hopefully) and 5 of us were told we make too much! What a different world. Our problem is we are making as much as our supervisors and they don't like that. But they also don't have to travel, go out of the office, do tons of paperwork nor go through apartments that stink to high heaven!

have a good day Dustin! I am heading out to a property

My bonus is 10% before taxes, but they put in on a seperate check so I don't get hit as hard, if they put them on the same check, I wouldn't clear anything!

THE OHIO CHAT ROOM!!!

Who is online