THE OHIO CHAT ROOM!!!

yodejt02 · **Posted:** Thu Jan 21, 2010 4:31 pm

I am trying to see if he will come to the Indiana M&G. Since there will be alot of KJs and from different years that should give him a good look at what it would take.

tommudd · **Posted:** Thu Jan 21, 2010 5:05 pm

Pretty much all the KJs are the same really as far as design, seen one seen them all, only difference is the stupid plastic cover over the pinch weld area on 05 and later, but you can install earlier model on later model etc.
I have had two sets of Boulder Bars and now the Rocklizard, and like the latter best as far as design, looks etc.
Be interesting for sure

I wish someone would design other things instead of doing the same old thing's, we have great roof racks available, great rockrail's etc. Doesn't anyone want to produce something different? All anyone wants to do is copy what is already being sold.
I have a ton of ideas but no one to take my designs to reality!

yodejt02 · **Posted:** Thu Jan 21, 2010 5:32 pm

I am sure this guy could do something for you Tom. I think he, like everyone, is using his trade to make up the difference in his paycheck. So, if theres something you want I am sure he would try. Seemed pretty open to suggestions :mrgreen:

Two sets of rails you say............
any chance those might make it to the M&G :wink:

Boiler · **Posted:** Thu Jan 21, 2010 5:51 pm

Tom get him to build your swingout tire carrier with flip up buffet table idea. That will keep him busy for a while...

Diggerfreek · **Posted:** Thu Jan 21, 2010 6:07 pm

I'd like to see bumpers :wink:

tommudd · **Posted:** Thu Jan 21, 2010 6:16 pm

Boiler wrote:

Tom get him to build your swingout tire carrier with flip up buffet table idea. That will keep him busy for a while...

Thats on hold and will be part of the trailer build.
I have other ideas that if someone made them they would sell quickly. Small parts to replace some plastic parts currently, very cool easy to make, just have to find a fabricator that will listen to ideas :wink:

tommudd · **Posted:** Thu Jan 21, 2010 6:23 pm

Digger so would I, esp. rear bumpers. Something different than whats available. Something else that we've drawn up and been talking about.
But there are some new things coming! Soon!!! :twisted:

If you lived closer Digger I bet I could hook you up with someone here close by :wink:

Diggerfreek · **Posted:** Thu Jan 21, 2010 6:37 pm

tommudd wrote:

Digger so would I, esp. rear bumpers. Something different than whats available. Something else that we've drawn up and been talking about.
But there are some new things coming! Soon!!! :twisted:

If you lived closer Digger I bet I could hook you up with someone here close by :wink:

You are such a tease :twisted:

Like I said, one of these days I will make it out there :seuss:

tommudd · **Posted:** Thu Jan 21, 2010 6:47 pm

Any one need a lift? My old setup,100,000 miles
already together, front springs/shocks/rear springs/rear shocks ( only have 30,000) top spacer plate for the front everything you need to install, used but still some life in it.
Thought it was sold but once again I am standing here holding stuff and no $$$$$$ in my pocket

I am not a bank, nor am I rich enough to get stuff and hold parts for anyone , so if you have money in hand OK if not don't bother me! :banghead:

lift $225 QUICK SALE I need the money NOW since I have been sitting here waiting
No shipping don't even ask :SOMBRERO:

2) 265-70-16 Treadwrights with BFG AT tread and on BFG casings less than 1500 miles on them $120 (new about 160 plus shipping)

501 · **Posted:** Thu Jan 21, 2010 6:55 pm

tommudd wrote:

Boiler wrote:

Tom get him to build your swingout tire carrier with flip up buffet table idea. That will keep him busy for a while...

Thats on hold and will be part of the trailer build.
I have other ideas that if someone made them they would sell quickly. Small parts to replace some plastic parts currently, very cool easy to make, just have to find a fabricator that will listen to ideas :wink:

Any chance these parts your talking about Tom could be made out of aluminum?

tommudd · **Posted:** Thu Jan 21, 2010 7:02 pm

501 wrote:

tommudd wrote:

Boiler wrote:

Tom get him to build your swingout tire carrier with flip up buffet table idea. That will keep him busy for a while...

Thats on hold and will be part of the trailer build.
I have other ideas that if someone made them they would sell quickly. Small parts to replace some plastic parts currently, very cool easy to make, just have to find a fabricator that will listen to ideas :wink:

Any chance these parts your talking about Tom could be made out of aluminum?

Nope, I want real metal....steel or nothing :twisted:

well they could be but :-)r

rokee1998 · **Posted:** Thu Jan 21, 2010 7:29 pm

standing in the corner trying not to ruffle feathers :oops:

tommudd · **Posted:** Thu Jan 21, 2010 7:36 pm

rokee1998 wrote:

standing in the corner trying not to ruffle feathers :oops:

Just stand there for at least a half hour Dustin,
when I get back from the store I may let you go get some milk and cookies and watch Captain Kangaroo

rokee1998 · **Posted:** Thu Jan 21, 2010 7:37 pm

I don't want cookies, Wildly Cherry M&M's will suffice though :SOMBRERO:

RedKJ04 · **Posted:** Thu Jan 21, 2010 8:56 pm

Cookies don't sound bad to me :mrgreen:

tommudd · **Posted:** Thu Jan 21, 2010 11:06 pm

Let him eat cake then :wink:

Chris got any cookies baked yet?
Chris if you did are there any left ?
Chris is Erin still mad at me?
Chris answer me now!

Been over on the Land Rover sites all evening, reading up and getting ready
Maybe I'll keep the Jeep for short runs going to the store or the mall

yodejt02 · **Posted:** Fri Jan 22, 2010 12:11 am

the cheaper fix is to just get some Land Rover emblems and stickem on the Jeep..er....Land Rover :-)r

tommudd · **Posted:** Fri Jan 22, 2010 12:15 am

yodejt02 wrote:

the cheaper fix is to just get some Land Rover emblems and stickem on the Jeep..er....Land Rover :-)r

Maybe cheaper here, but I am getting ready for the big move across the pond and way easier to get LR parts over there than Jeep parts ! Only saw two Jeeps the whole month I was over there.
Plus they drive on the wrong side of the road so need a right hand steer. Or a Mail Jeep :mrgreen:

Diggerfreek · **Posted:** Fri Jan 22, 2010 12:20 am

tommudd wrote:

yodejt02 wrote:

the cheaper fix is to just get some Land Rover emblems and stickem on the Jeep..er....Land Rover :-)r

Maybe cheaper here, but I am getting ready for the big move across the pond and way easier to get LR parts over there than Jeep parts ! Only saw two Jeeps the whole month I was over there.
Plus they drive on the wrong side of the road so need a right hand steer. Or a Mail Jeep :mrgreen:

I'll ship parts for ya, and if you need, I have a very very good contact in the land of OZ :mrgreen:

yodejt02 · **Posted:** Fri Jan 22, 2010 12:21 am

No Problem I'll open a Jeep dealership.....the Brits have had an monopoly over there long enough!

and we can teach them how to drive on the correct side :BANANA:

I lived in Jamaica for awhile they're supposed to drive on the left, but really its where ever the happens to be an opening

THE OHIO CHAT ROOM!!!

Who is online