It is currently Fri Nov 06, 2026 3:48 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 31 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Front propeller shaft
PostPosted: Fri Jan 22, 2010 10:08 pm 
Offline
LOST Newbie
User avatar

Joined: Mon Jul 11, 2005 12:00 pm
Posts: 56
I got mine from a place called Driveshaft Parts at http://www.driveshaftparts.com. Their website isn't very good but I've seen them sell CV's on E-bay. Came with the joint, a boot, a crimp style band clamp, a tube of grease, 6 bolts and 3 plates. The hardest part was undoing the exhaust pipe joint and the 12 bolts to remove the front propeller shaft.

_________________
2003 Liberty Sport, 235/70R16 Firestone Destination A/T, AR Series 95 wheels


Top
 Profile  
 
 Post subject: Re: Front propeller shaft
PostPosted: Fri Jan 22, 2010 10:13 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jun 16, 2008 9:35 pm
Posts: 400
Location: Lancaster, Ohio
exhuast doesnt need touched to remove the front shaft, atleast on the 07's.

Marshelss auto parts sells used ones with low miles for $30 I picked one up for just in case when I got my tcase.

_________________
Jeepless again.

Wheeling an Isuzu Rodeo on 1 tons
and a Stock Chevy Tracker


Top
 Profile  
 
 Post subject: Re: Front propeller shaft
PostPosted: Sat Jan 23, 2010 1:21 am 
Offline
LOST Member
User avatar

Joined: Wed Mar 01, 2006 8:45 pm
Posts: 135
Location: Niagara Falls,Ontario,Canada.
Was sick with the flu so today was the day.

Propeller shaft is replaced, and had to lower the tranny to get
the shaft out, pain in the booty. ( broke 3 of the 8 bolts [ RUST ] )
Will replace w/Grade 8's on Tuesday.
Front wheel bearing done as-well, and since it was in the air
rear U-joints were replaced.

_________________
Black 03' Renny / 45RFE
All Tupperware
2.5" lift 245/70/16 Hercules Terra Trac AT's
Mopar skids
K&N drop in filter
Valvaline Synthetic all around.
' Under Construction '

http://www.cardomain.com/ride/2291075

O[[[[[[[O


Top
 Profile  
 
 Post subject: Re: Front propeller shaft
PostPosted: Sat Jan 23, 2010 9:01 am 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jun 16, 2008 9:35 pm
Posts: 400
Location: Lancaster, Ohio
07's must be differant, I took the shaft out without touching anything but the bolts. I had enough room tto lift the rear of it above the tcase and slide it back a tad so the front would drop

_________________
Jeepless again.

Wheeling an Isuzu Rodeo on 1 tons
and a Stock Chevy Tracker


Top
 Profile  
 
 Post subject: Re: Front propeller shaft
PostPosted: Sat Jan 23, 2010 9:45 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
04s same way
very simple and quick maybe 20 minute job if that

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Front propeller shaft
PostPosted: Sat Jan 23, 2010 10:05 am 
Offline
Banned For Abuse on LostJeeps.com
User avatar

Joined: Thu Jul 07, 2005 12:40 pm
Posts: 2353
Location: Kettering, Ohio
'05: took the guy about 20 minutes (warranty.) I wonder if exhaust routing for the 45rfe made a difference?

_________________
LOST # 633
'05 KJ 3.7L/6spd/241 245/75/16 MT's
'88 MJ 4.0L/AW4/231 SWB HPD30 & trac-loc D44 w/3.73's
A dirty Jeep is a happy Jeep


Top
 Profile  
 
 Post subject: Re: Front propeller shaft
PostPosted: Sat Jan 23, 2010 3:38 pm 
Offline
LOST Member
User avatar

Joined: Wed Mar 01, 2006 8:45 pm
Posts: 135
Location: Niagara Falls,Ontario,Canada.
Don't know, actually mine and another
Liberty was in the shop, both had to have the tranny
cross member lowered...

So who knows, its done and that's all that matters.

_________________
Black 03' Renny / 45RFE
All Tupperware
2.5" lift 245/70/16 Hercules Terra Trac AT's
Mopar skids
K&N drop in filter
Valvaline Synthetic all around.
' Under Construction '

http://www.cardomain.com/ride/2291075

O[[[[[[[O


Top
 Profile  
 
 Post subject: Re: Front propeller shaft
PostPosted: Sat Jan 23, 2010 3:40 pm 
Offline
LOST Member
User avatar

Joined: Wed Mar 01, 2006 8:45 pm
Posts: 135
Location: Niagara Falls,Ontario,Canada.
offroadohio wrote:
07's must be differant, I took the shaft out without touching anything but the bolts. I had enough room tto lift the rear of it above the tcase and slide it back a tad so the front would drop

You had to do yours already, wow.
Should have lasted a lot longer than roughly 3 yrs, no?

_________________
Black 03' Renny / 45RFE
All Tupperware
2.5" lift 245/70/16 Hercules Terra Trac AT's
Mopar skids
K&N drop in filter
Valvaline Synthetic all around.
' Under Construction '

http://www.cardomain.com/ride/2291075

O[[[[[[[O


Top
 Profile  
 
 Post subject: Re: Front propeller shaft
PostPosted: Sat Jan 23, 2010 8:21 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jun 16, 2008 9:35 pm
Posts: 400
Location: Lancaster, Ohio
No my front driveshaft is fine, I had to do a tcase becuase the chain broke.

After I did the tcase I still have a slight driveline vibe so I pulled the shaft to double check it.

_________________
Jeepless again.

Wheeling an Isuzu Rodeo on 1 tons
and a Stock Chevy Tracker


Top
 Profile  
 
 Post subject: Re: Front propeller shaft
PostPosted: Sat Jan 23, 2010 10:15 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
InCommando wrote:
'05: took the guy about 20 minutes (warranty.) I wonder if exhaust routing for the 45rfe made a difference?

That would be correct,you have to unbolt the left side of the "Y" pipe to remove the front driveshaft,adds 5mins to the R&I time.


Top
 Profile  
 
 Post subject: Re: Front propeller shaft
PostPosted: Sat Jan 23, 2010 10:44 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jun 16, 2008 9:35 pm
Posts: 400
Location: Lancaster, Ohio
ah, makes plenty of sense.

_________________
Jeepless again.

Wheeling an Isuzu Rodeo on 1 tons
and a Stock Chevy Tracker


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 31 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com