Taco tires/rims

E2 · **Posted:** Fri Feb 19, 2010 1:19 am

Okay so any one put start to think about changing to a 15" rim with a offset to push the rim/tires slightly outwards for better stance?

Jeepin_it_real · **Posted:** Fri Feb 19, 2010 1:36 am

wont work... 16 in is smallest

E2 · **Posted:** Fri Feb 19, 2010 1:51 am

If this is the case then makes no sense to change out rims, but just add some spacers or will that cause more rubbing for either 265/75r16 or 235/85r16 ?

Jeepin_it_real · **Posted:** Fri Feb 19, 2010 2:13 am

the tires you listed are 31.6 and 31.7 inch diameters... the 265/75 is wider actually then the 235/85... that might lead to rubbing when you cut the wheel with the spacers... i'm no tire expert tho so just adding my :2cents:

here

DirtyKK · **Posted:** Fri Feb 19, 2010 3:20 am

You shouldnt go too wide of a stance or you'll risk rubbing tires on the lip of the fender. I have 265s on a 16x8 with I believe 5" offset and the rim sits flush with the fenders and when stuffed tuck nicely.

nightdrv · **Posted:** Sat Mar 06, 2010 5:50 pm

I am putting together a set of Toyota rims, but they're 16" steelies. 4 more left to find....... :JEEPIN:

Taco tires/rims

Who is online