Best way to attatch this to my jeep???

Budke · **Posted:** Mon Mar 08, 2010 3:08 pm

So Terry gave me this yesterday when we went wheeling in the ONF.
Its not sticky anymore and I have no clue how to stick it on.
Ideas??

By the way, thanks a million Terry!!!

BVCRD · **Posted:** Mon Mar 08, 2010 3:14 pm

Tape mastic.

JL Rockies · **Posted:** Mon Mar 08, 2010 3:36 pm

3M double stick.

tan's2002kjlimited · **Posted:** Mon Mar 08, 2010 5:02 pm

I'm sure they sell 3m tape or velcro at Wallyworld.
Or duct tape. :ROTFL:

Diggerfreek · **Posted:** Mon Mar 08, 2010 5:13 pm

JL Rockies wrote:

3M double stick.

X2

tommudd · **Posted:** Mon Mar 08, 2010 5:17 pm

For those of us who have been on here for a long time
the answer would be;

PEANUT BUTTER

:ROTFL:

Fulltimer · **Posted:** Mon Mar 08, 2010 5:30 pm

The ones I put on my side window were put on with OUTDOOR 3M DOUBLE SIDED TAPE. Now I'm going to take them off so I'll report how well they stick. Whatever you use you will have to take the old stuff off first. The 3M stuff came from Ace Hardware.

Terry

corwyyn · **Posted:** Mon Mar 08, 2010 6:05 pm

The outdoor variety double-side tape would be good, or if you can find some the adhesive tape they use to attach cell phone/mobile radio antennas to car windows would be a good choice. Should be able to use acetone or goo-gone to remove the old sticky stuff, then wipe down with some rubbing alcohol to make a clean surface and attach the tape.

BVCRD · **Posted:** Mon Mar 08, 2010 6:08 pm

Tape mastic is the stuff we used to bond steel roof panels together. Better not want it to come off if you use it though.

Budke · **Posted:** Mon Mar 08, 2010 7:08 pm

If this comes off it'll probably be because I'll be diggerizing it.

I'll look for the outdoor 3M and tape mastic at work tomorrow night. Probably get whatever is cheapest.

TAHOE · **Posted:** Mon Mar 08, 2010 7:11 pm

I've used the 3M 2 sided emblem tape, gray, same thing that is used on vent visors/headlight covers/ etc. Pretty much stuck once you put it on.

99_XC600 · **Posted:** Mon Mar 08, 2010 7:21 pm

About 3 Lag Screws aprox 8" long.....that should about do it.

InCommando · **Posted:** Mon Mar 08, 2010 8:02 pm

HoosierJeeper · **Joined:** Sun Feb 15, 2009 8:23 am **Posts:** 1218

Gum.....

wecwbe · **Posted:** Tue Mar 09, 2010 2:02 am

99_XC600 wrote:

About 3 Lag Screws aprox 8" long.....that should about do it.

I say go for a ramset! There is nothing like judiciuos use of gunpowder! :jester:

501 · **Posted:** Tue Mar 09, 2010 3:08 am

Weld it on

Fulltimer · **Posted:** Tue Mar 09, 2010 5:44 am

I got my lettering etc off. The 3M tape that I used worked very well.

Terry

Budke · **Posted:** Tue Mar 09, 2010 10:00 am

Fulltimer wrote:

I got my lettering etc off. The 3M tape that I used worked very well.

Terry

Awesome. I will probably pick some of it up tomorrow morning when I get off work.

CRD Joe · **Posted:** Tue Mar 09, 2010 7:58 pm

Hey, how come us lifers cant get stuff like that to put on our trucks? :CAMPING:

ATXKJ · **Posted:** Tue Mar 09, 2010 9:08 pm

Well - you can bug pixeldzn and see if he has any left - but it's been a few years so I doubt it.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=12025&highlight=

Best way to attatch this to my jeep???

Who is online