It is currently Tue Aug 18, 2026 1:02 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: light bar
PostPosted: Mon Apr 12, 2010 2:41 pm 
Offline
LOST Newbie

Joined: Wed Apr 07, 2010 4:12 pm
Posts: 8
Location: Calgary Canada
I just bought a light bar from a 03 renagade from the wreckers just wondering were can I get all the wiring is there a part number that i need to get and give it to chrysler ? i am putting it on a it 06 liberty limited or is there somthing else i can do to hook them up Thanks!


Top
 Profile  
 
 Post subject: Re: light bar
PostPosted: Mon Apr 12, 2010 2:46 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
light bar harnes should be either 52112062AA for 02s to 04s
or 52112062AE for 05-06

not sure if that includes the switch inside and all of the hookups or not, can't remember

Did you get the mounting plate and everything top side?

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: light bar
PostPosted: Mon Apr 12, 2010 2:59 pm 
Offline
LOST Newbie

Joined: Wed Apr 07, 2010 4:12 pm
Posts: 8
Location: Calgary Canada
I got everthing but the wiring I got some wiring from chrysler but it looks like its genaric for any kind of fog lights it came with a switch relays but does not plug into the light bar this is the part number 01-034-003


Top
 Profile  
 
 Post subject: Re: light bar
PostPosted: Sat Apr 17, 2010 11:53 am 
Offline
Oilburner
Oilburner
User avatar

Joined: Fri Aug 31, 2007 9:54 am
Posts: 2788
Location: Barcelona Spain
Have you checked if you don't already have the wiring installed?

_________________
Cherokee 2,5 CRD: sold - Wrangler TJ 2.5: gone - Touareg V10 TDI: new toy

Solo Liberty en Español: Jeepliberty.es


Top
 Profile  
 
 Post subject: Re: light bar
PostPosted: Sun Apr 18, 2010 9:36 am 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 30, 2009 9:04 am
Posts: 824
Location: Canada
Manny that Harness part number looks like a Hella part Number not a Chrysler one.


Top
 Profile  
 
 Post subject: Re: light bar
PostPosted: Sun Apr 18, 2010 6:26 pm 
Offline
LOST Newbie

Joined: Wed Apr 07, 2010 4:12 pm
Posts: 8
Location: Calgary Canada
So I checked I dont have the factory wiring in my jeep so the wiring I got from chrysler they say for sure that its a mopar part so I am going to try and install this when I have some free time if anybody has some pointers on mounting it on the roof that would be great Thanks!


Top
 Profile  
 
 Post subject: Re: light bar
PostPosted: Sun Apr 18, 2010 6:32 pm 
Offline
LOST Member
User avatar

Joined: Sat Jan 09, 2010 11:49 pm
Posts: 441
Location: LOST in GEORGIA&FLORIDA!
This should help alot
http://jeepkj.com/forum/showthread.php?t=34988

_________________
GONE-2003 Liberty Freedom Edition-GONE

2011 LTZ CrewCab Z71 4x4 Silverado.
Steel Green Metallic.
2" Leveling Kit.
33" Mastercraft A/T-2
Ranch Hand Grille Guard.
Black Low Profile Kobalt Tool Box.
Front & Rear Huskey Liners.


Top
 Profile  
 
 Post subject: Re: light bar
PostPosted: Sun Apr 18, 2010 7:01 pm 
Offline
LOST Newbie

Joined: Wed Apr 07, 2010 4:12 pm
Posts: 8
Location: Calgary Canada
Thats wicked thanks for your help


Top
 Profile  
 
 Post subject: Re: light bar
PostPosted: Thu Apr 22, 2010 6:58 pm 
Offline
LOST Junkie
User avatar

Joined: Wed Sep 26, 2007 9:33 am
Posts: 525
Location: Long Island NY
I have the same problem I have the lights the cable from the light and the switch. Every dealer told me they can not get the other wires. I have to that wire (52112062AA ) I need the other two wires. In the instruction I think its wire D I need H and L. http://site.justforjeeps.com/guide/82206126AB.pdf

_________________
Benny Migs
03 Black Sport
Front OME HD Coils Struts 1/2inch clevis lift, Rear OME 132L OME HD Coils 2 ISO upper pads
30x9.5x15 General Grabbers AT2 on Craiger Soft 8's 15x7 4" BS
safari rack, super nerfs, Rear Hitch, Front ARB Bumper , JBA A-Arms




http://www.BennyMigsPhoto.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com