It is currently Wed Oct 28, 2026 5:22 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: clevis lift
PostPosted: Fri Feb 17, 2006 6:52 pm 
Offline
LOST Member
User avatar

Joined: Thu Aug 04, 2005 1:39 am
Posts: 111
Location: Boise ID
I am planning on putting a lift on my '02 limited. It is a prelowered (1" higher than most), so is a clevis lift going to help me at all?
will this make the overall lift hight after I get a lift kit installed or do I need to keep the 1/2" gain from the clevis into account when lifting it?

I've head that anything over 2.5" is not good for the CV angles, so what is the highest lift/clevis lift combo that I could do?

_________________
'02 limited w/ stuff
Image


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 17, 2006 7:30 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8052
Location: Kentuckeeee
If youre going with a full spring lift kit, your jeep being pre-lowered will not change a thing. If you get spacers, the jeep will be 1in higher than lowered jeep with spacers.

A clevis lift will help any jeep, if you do a clevis lift there is no way it cant lift the jeep.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 17, 2006 7:45 pm 
Offline
Forum Admin
Forum Admin

Joined: Sat Jul 09, 2005 9:51 pm
Posts: 2202
Location: Fall River,MA
all the clevis does is level it out,unless you like the raked look,realy no advantage other than that

_________________
PETE
ADMINISTRATOR
L.O.S.T. 4 LIFE
04 COLUMBIA ED. & 04 SPORT


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 20, 2006 4:47 pm 
Offline
LOST Newbie

Joined: Mon Jan 23, 2006 11:06 pm
Posts: 29
Location: South Central North Dakota
I have been reading a lot of discussion about the clevis lift and prelowered kjs what does the clevis lift consist of and who sells them. and what is the deal with pre lowered. I have a 02 renegade manufacture date of 3-02. I am going to order the rockfather I lift from rockyroad offroad. what would the benefit be with a clevis.

_________________
02 Liberty Renegade, Cactus green, 3.7l stage 1 jet chip, K&N filter. Still gutless . I WANT A DIESEL .


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 20, 2006 4:58 pm 
Offline
This member has been Banned

Joined: Fri Jul 15, 2005 10:20 am
Posts: 1100
Location: TEXAS
The Animal I'm most like: Velociraptor :twisted:

The advantage is more tire clearance which the front really needs, the back is already 1 1/2" higher.

The advantage to the "Rake" is increased gas MPG's. See, your front end floats up while you are driving so the rake keeps the wind resistance down.

If you dont want to use conduit nuts to prevent slips, use a "U" bolt clamped around her of any thickness you desire.

For the rear, get yourself some 1/2" thick Mudflap rubber or 3/4" plywood and trace your Isolators on to it and cut them out. Stack as many as you feel comfy with and you are lifted safely and cheap.

Just as good, durable, and solid as the other "spacer" lifts and its under $20...Now called the "Poor Man's lift".

Don't hate the PLAYA :lol: :lol: :lol:


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 20, 2006 5:32 pm 
Offline
LOST Newbie

Joined: Mon Jan 23, 2006 11:06 pm
Posts: 29
Location: South Central North Dakota
Velociraptor? I guess I need to brush up on my paleontology.
So the RAKE you refer to is the way the front end hangs lower?
I just went to the tech section and read how to do this. But Conduit nuts? I read nothing on this but i understand the u-bolts to keep strust from sliding in the clevis Am I correct of this?

_________________
02 Liberty Renegade, Cactus green, 3.7l stage 1 jet chip, K&N filter. Still gutless . I WANT A DIESEL .


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 20, 2006 5:42 pm 
Offline
This member has been Banned

Joined: Fri Jul 15, 2005 10:20 am
Posts: 1100
Location: TEXAS
Yes to all.

Some folks were running the conduit nuts and another fellow VelociRaptor made some spacers.

Type conduit nut in the search


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 20, 2006 6:20 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8052
Location: Kentuckeeee
This is the clevis lift. A Clevis is not a part that you buy, its something on your jeep.

The silver thing is a conduit nut.

http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=5880

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 20, 2006 9:05 pm 
Offline
LOST Newbie

Joined: Mon Jan 23, 2006 11:06 pm
Posts: 29
Location: South Central North Dakota
Jeepjeepster wrote:
This is the clevis lift. A Clevis is not a part that you buy, its something on your jeep.

The silver thing is a conduit nut.

http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=5880



Thanks those pics cleared up all questions about clevis lift. does this cause alignment problems though? and what are the benefits of doing this along with other lifts that others have done i have read about.

_________________
02 Liberty Renegade, Cactus green, 3.7l stage 1 jet chip, K&N filter. Still gutless . I WANT A DIESEL .


Top
 Profile  
 
 Post subject:
PostPosted: Mon Feb 20, 2006 9:37 pm 
Offline
This member has been Banned

Joined: Fri Jul 15, 2005 10:20 am
Posts: 1100
Location: TEXAS
Yes you should get an alignment.

Advantage...Price


Top
 Profile  
 
 Post subject:
PostPosted: Tue Feb 21, 2006 4:27 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8052
Location: Kentuckeeee
The only benefit of this is it gives you more lift, for free.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster


Top
 Profile  
 
 Post subject:
PostPosted: Tue Feb 21, 2006 10:39 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Nov 06, 2005 5:30 am
Posts: 1036
Location: Stillwater, MN
ShadE I have done the clevis and if you want local help send me a PM and we'll figure something out. The clevis is noticeable...

_________________
'02 KJ Sport V6 4x4
3/8" Clevis lift
Rusty's 2.5 lift
255/70/R16 Fleet Farm All Terrain (yes they work)
Class 3 hitch
Hellas
Police Scanner/CB radio
LOST #: JH061986
Image


Top
 Profile  
 
 Post subject:
PostPosted: Tue Feb 21, 2006 11:25 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Dec 30, 2005 10:26 pm
Posts: 2133
Location: Sin City USA
So how much bigger tire can you get with just a clevis lift? These 225's are an embarassment to my Jeep. And before you say go out a get a lift, Since I have a CRD, Im waiting to see what happens by Summer for the possible rumor of a Superlift or something from Quinn and Heather :twisted: :twisted: :twisted:

_________________
2016 JKU RUBICON

other mods coming soon...


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 22, 2006 9:20 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Nov 06, 2005 5:30 am
Posts: 1036
Location: Stillwater, MN
depending on which year KJ you happen to have, on my prelowered '02 sport-I ran 255/70's with nothing but a clevis for 3 months with rubbing at the sway bars and pinch weld. A 255/70 isn't as tall as a 245/75 (the 255 is close to a half inch smaller-30.2 to 30.6 inches tall) but the 245 isn't as wide as a 255 (10 millimeter difference). That width would be enough to get rid of the rubbing at the swaybar for me...But I don't mind a little rubbing...

_________________
'02 KJ Sport V6 4x4
3/8" Clevis lift
Rusty's 2.5 lift
255/70/R16 Fleet Farm All Terrain (yes they work)
Class 3 hitch
Hellas
Police Scanner/CB radio
LOST #: JH061986
Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 22, 2006 10:21 am 
Offline
LOST Newbie

Joined: Fri Jan 20, 2006 10:17 am
Posts: 43
Location: Chandler Arizona
The clevis lift is really easy to do. The instructions provided on this website are accurate. As long as you have the right tools, it shouldn't take more than 2 - 2.5 hours. Just have to do an alignment afterwards.

_________________
2005 Jeep KJ Renegade. 2.5" Rusty's Lift, 3/8" Clevis Lift (custom Spacers), BFG 245/75R 16 AT, 1/25" torque stud wheel spacers, Light Bar, all factory skids.

2004 Jeep TJ Sport. 2" Terraflex lift, BFG MT/KM 31x10.5, Front sway bar disco, Cobra 75.

1990 Jeep XJ. 2" spacer lift. POS won't start!


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 23, 2006 12:45 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Dec 30, 2005 10:26 pm
Posts: 2133
Location: Sin City USA
AZ_Overdrive wrote:
The clevis lift is really easy to do. The instructions provided on this website are accurate. As long as you have the right tools, it shouldn't take more than 2 - 2.5 hours. Just have to do an alignment afterwards.


The instructions are where? in the link above or the one in the tech section?

_________________
2016 JKU RUBICON

other mods coming soon...


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 24, 2006 8:56 am 
Offline
LOST Newbie

Joined: Fri Jan 20, 2006 10:17 am
Posts: 43
Location: Chandler Arizona
In the tech section...

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=168&highlight=clevis+lift+instructions

_________________
2005 Jeep KJ Renegade. 2.5" Rusty's Lift, 3/8" Clevis Lift (custom Spacers), BFG 245/75R 16 AT, 1/25" torque stud wheel spacers, Light Bar, all factory skids.

2004 Jeep TJ Sport. 2" Terraflex lift, BFG MT/KM 31x10.5, Front sway bar disco, Cobra 75.

1990 Jeep XJ. 2" spacer lift. POS won't start!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com