It is currently Fri Nov 06, 2026 5:43 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: Question about Mopar site because I just don't get it.
PostPosted: Sun Apr 25, 2010 9:53 am 
Offline
LOST Junkie

Joined: Sun Jul 26, 2009 12:51 pm
Posts: 600
Location: SE Michigan
So I went to their site and I am looking for:

1. A thermostat (I may wait for the member who is fabbing them up) MSRP = $142.00 your price = $94.35
2. A front drive shaft (I have a pinky hole in my rear boot) MSRP = $417.00 your price = $277.77

How can there be such a difference in price? Why would anyone EVER go to a dealer to purchase a part? What am I missing? Does the dealership system really make $186.88 off of me if I drive all the way to their store and wait in their lobby instead of picking up a package off of my front porch in a few days?

It just seems too good to be true. How am I getting ripped off... I didn't try to order yet, do I need to be a member?

_________________
2005 Black KJ Sport CRD,
GDE Full Torque ECO TUNE, GDE Transmission ECO Tune,
Samco British Racing Green Hoses
Build Date 1/05
200k miles.
Original Owner


Top
 Profile  
 
 Post subject: Re: Question about Mopar site because I just don't get it.
PostPosted: Sun Apr 25, 2010 10:45 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
Are you talking about www.moparpartsamerica.com ? Their prices are good too, and when you go to purchase the parts the website will walk you through the membership process.

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject: Re: Question about Mopar site because I just don't get it.
PostPosted: Sun Apr 25, 2010 12:07 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun May 24, 2009 9:25 am
Posts: 909
Location: Kearney, NE
Yes, dealerships significantly raise the prices on you so that they, too, can make a profit. It is far cheaper to order parts online, for any manufacturer.

_________________
2006 Jeep Liberty CRD, Limited
GDE Eco Tune, GDE TCM Tune, Bauer 203* Tstat, Amsoil EaA 201 Filter, Clean MAP, Samco CAC Hoses, Magnaflow Muffler #12226.
New Mopar Fuel Filter, K&N Filterminder, Fumoto Oil Drain Valve
225/75R16 Hankook Dynapros


Top
 Profile  
 
 Post subject: Re: Question about Mopar site because I just don't get it.
PostPosted: Sun Apr 25, 2010 3:40 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Jul 29, 2008 6:34 pm
Posts: 2596
Location: America
That is like a bad stereotype that they are ripping you off. They are paying for the guy behind the counter, the building, the utilities, insurance, workers comp, employee benefits.............. I am sure I can think of 100 other things. The choice is yours if you go to the dealer or buy online. Online is much more volume then the dealer.

_________________
20 year owner of Libby CRD!
2006 LTD Bright Silver loaded with all the needed mods, CCV intact.
Equipped with HDS thermostat, plenty of heat, faster warm-ups, increased fuel mileage.


Top
 Profile  
 
 Post subject: Re: Question about Mopar site because I just don't get it.
PostPosted: Sun Apr 25, 2010 9:07 pm 
Offline
LOST Junkie

Joined: Sun Jul 26, 2009 12:51 pm
Posts: 600
Location: SE Michigan
I should have been more clear. I guess when I see a price difference that large, I assume I am not getting quality parts. I should have said that. I understand that the dealership has more to pay for, I was just wondering what the catch is. I guess there isn't one. I was talking about Moparpartsamerica. Is that the ACTUAL company that manufactures parts for Chrysler? I know they say that they are right down the street, but are they in any way sanctioned by Chrysler?

_________________
2005 Black KJ Sport CRD,
GDE Full Torque ECO TUNE, GDE Transmission ECO Tune,
Samco British Racing Green Hoses
Build Date 1/05
200k miles.
Original Owner


Top
 Profile  
 
 Post subject: Re: Question about Mopar site because I just don't get it.
PostPosted: Sun Apr 25, 2010 9:43 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 11, 2008 2:03 pm
Posts: 1866
Location: Houston, TX
MoparPArtsAmerica is a wholesale parts seller that is affiliated with a Jeep dealership in Oregon. They sell OEM Mopar-manufactured parts - but they are not the parts maker.

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Image


Top
 Profile  
 
 Post subject: Re: Question about Mopar site because I just don't get it.
PostPosted: Sun Apr 25, 2010 10:17 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jun 09, 2006 2:30 pm
Posts: 2523
Location: LOST in Wisconsin
I've ordered lots of parts from MPA and have always been satisfied. Its the same part you would get from the dealer.

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.


Top
 Profile  
 
 Post subject: Re: Question about Mopar site because I just don't get it.
PostPosted: Mon Apr 26, 2010 8:32 am 
Offline
LOST Junkie
User avatar

Joined: Fri Jan 26, 2007 12:55 pm
Posts: 621
Location: Portland, Oregon
Moparpartsamerica = Newberg Dodge according to the package.
http://www.newbergdodge.com/
http://www.buybob.com/


Top
 Profile  
 
 Post subject: Re: Question about Mopar site because I just don't get it.
PostPosted: Mon Apr 26, 2010 10:02 am 
Offline
LOST Addict
User avatar

Joined: Thu Sep 06, 2007 9:51 pm
Posts: 6302
Location: Somewhere between Heaven and Hell... But it is really hot here on Earth...
I spoke with one of the guys at Newberg when I received the wrong sensor (Problem on MPA's website) and they were very friendly. What the parts tech at the dealer told me was that MPA is basically a "volume buyer" at their dealership, and has a shop-rate account like any other repair shop. The only difference is that the prices might be a bit better still than a normal shop.

The guys at MPA (called them after the dealership) said that there was a problem with that image, but that they were blocked from listing exact part numbers on their search pages by Chrysler.

They must do a stupid amount of volume to be noticed by Chrysler like that.

_________________
Proud supporting vendor of LOST Jeeps
TRAVELING CRD TECH. I come to you!
Need help? Just ask! I've taken it apart more than most.
Email jeep [at] maincomputer [dot] com - BOARD MESSAGING IS BROKEN
Over 225 CRDs currently driving with my valves, timing belt, rockers, or ARP Studs.
Bad noises = REALLY bad things.


Top
 Profile  
 
 Post subject: Re: Question about Mopar site because I just don't get it.
PostPosted: Mon Apr 26, 2010 11:16 am 
Offline
LOST Addict
User avatar

Joined: Mon Jan 29, 2007 12:54 am
Posts: 3865
Location: Draper, UT
Our parts director owns his own plane.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.


Top
 Profile  
 
 Post subject: Re: Question about Mopar site because I just don't get it.
PostPosted: Mon Apr 26, 2010 11:59 am 
Offline
LOST Member

Joined: Mon Feb 18, 2008 2:59 pm
Posts: 137
Location: SJ, CA
may be they balance profits/lossses from other departments with the parts department.

It is unreasonable to think that they can justify a 100% markup in many parts...(like the drive shaft i m about to buy from mopartsamerica for 50% of the dealer`s price for the EXACT same part).

specially when moparts america is already making profit too and they can still give you half the price than a dealership.

In my opinion dealers are just bs... you have to wear kevlar pants when you buy a car so you don`t get screwed, they generally fail at repairs (or bs you about warranties) and are extremely overpriced.

may be I just had a lot of bad luck with dealers... but i go out of my way to avoid them.

_________________
-------------------------
Liberty CRD 2005
50K miles
ORM / EHM /facet lift pump
Suncoast TC and still shudders...
straight pipe.


Top
 Profile  
 
 Post subject: Re: Question about Mopar site because I just don't get it.
PostPosted: Mon Apr 26, 2010 12:35 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jul 12, 2005 10:23 am
Posts: 2121
Location: Kentucky, USA
Those radiators they sell at the local auto parts stores for $180-$200....you can get those on eBay brand new all day long for $35. I bought one for my ZJ and it was higher quality when I took it out of the box than the OEM part that was on my Jeep!

So the 300% markup they put on parts... um...yeah that is the reason you see Advance, O'reilly, AutoZone, etc. popping up on every corner these days.

Don't be afraid of buying online.

_________________

2005 Stone White KJ Limited CRD 4x4
Off-Road Pkg
Trac-Lok
Emu 790s/948s
Skyjacker H7088s rear/Bilsteins front
15x7 Black Rock Lobos/31x10.50 Firestones
GDE HOT Tune + TCM Tune
Euro TC
CB radio
Thrush Turbo muffler
AEM DryFlow filter


Image


Top
 Profile  
 
 Post subject: Re: Question about Mopar site because I just don't get it.
PostPosted: Mon Apr 26, 2010 2:39 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 06, 2007 9:51 pm
Posts: 6302
Location: Somewhere between Heaven and Hell... But it is really hot here on Earth...
007husky wrote:
may be they balance profits/lossses from other departments with the parts department.

It is unreasonable to think that they can justify a 100% markup in many parts...(like the drive shaft i m about to buy from mopartsamerica for 50% of the dealer`s price for the EXACT same part).

specially when moparts america is already making profit too and they can still give you half the price than a dealership.

In my opinion dealers are just bs... you have to wear kevlar pants when you buy a car so you don`t get screwed, they generally fail at repairs (or bs you about warranties) and are extremely overpriced.

may be I just had a lot of bad luck with dealers... but i go out of my way to avoid them.


No, you aren't alone in the treatment by dealers. I got hosed out of warranties by two different dealers on two different vehicles. My Jetta had 5100 miles on it when I bought it, and had been previously registered... But the scum dealer wouldn't provide the "certified used car 100k warranty" b/c they insisted it wasn't a used car. Oh, then it DROVE to Florida from Mexico where it was built? No, but you still don't get that warranty for free. You can always pay us the $1800 that warranty costs.

Then there was the fiasco on the CRD where I *HAD* the 7/70... Until Chrysler's system decided I didn't. The selling dealer offered zero help on that one too.

There is a reason they are known as "stealerships" and it is a well-earned name.

_________________
Proud supporting vendor of LOST Jeeps
TRAVELING CRD TECH. I come to you!
Need help? Just ask! I've taken it apart more than most.
Email jeep [at] maincomputer [dot] com - BOARD MESSAGING IS BROKEN
Over 225 CRDs currently driving with my valves, timing belt, rockers, or ARP Studs.
Bad noises = REALLY bad things.


Top
 Profile  
 
 Post subject: Re: Question about Mopar site because I just don't get it.
PostPosted: Mon Apr 26, 2010 2:48 pm 
Offline
LOST Addict
User avatar

Joined: Thu Jul 23, 2009 5:47 pm
Posts: 1817
Location: York,PA
never ordered a thing from MPA but have looked around the site prices seem good from what I have seen. I have gotten a few things at Stettler Dodge Jeep, nothing big just lugage rack covers and a rear wiper, I don't feel over charged by the dealer so far. I will be compairing MPA to the dealer in the future.

_________________
2006 Liberty CRD Limited Deep Beryl Green Metallic Clear coat, Fumoto valve, MH ProVent (removed), GDE Eco tune,
OME 790/948 springs, OME struts, OME N132L shocks, Jeepin by Al A-arms, Hercules Terra Trac AT2 245/75R16
Weeks Stage 1 EGR delete, 5 volt steel glow plugs


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com