well boiler rocks that guy is so helpfull and i will tell anyone to buy his product!!!! he sent the shims out very fast and awnsered any ?s i had so thanks boiler......but anyway i just finshed these about 30min ago here are some before and after

http://img641.imageshack.us/img641/4154/dsc1036.jpg before shims









http://img30.imageshack.us/img30/6199/dsc1037s.jpg after shims








k these all depend on ur mech skill on how long these take to install ive worked on alot of cars in my time so this was a breeze.....drivers side is by far more time because of the battery tray and the fuse block u have to move out of the way to reach the top strut bolts....drivers side with mech skill about 45 min from the time i took the tire off till i bolted it back on and went to the pass side.....pass side with mech skills about 18min on the dot from the time i pulled the wheel off till i bolted it back on and let the libby down and wala done..... my rock krawler kit will be here today or tomorrow and i will install that with before and after pics stacked with the shims..... thanks again boiler and if u have a kk and are thinking about ordering these shims DO IT!!!!!

_________________
2010 liberty sport 4x4
rock krawler 3.5 lift
boiler shims
magnaflow exhaust
1.25 billet wheel spacers
245/75/16 mud claws (beefy)

Made a definite difference.
I see your kids don't know what a kickstand is either

_________________
'99 Tahoe, 3" BL, 285/75/16's , MT II's.
'05 Liberty Sport, -wifey's
'98 Poncho Fireturd, 3.8L, .....the purple pig!

thanks

lol thoes are my bikes i dont have kickstands on them lol

kickstands get in the way when im jumping lol

_________________
2010 liberty sport 4x4
rock krawler 3.5 lift
boiler shims
magnaflow exhaust
1.25 billet wheel spacers
245/75/16 mud claws (beefy)

Looks good

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch

Glad it went well!

_________________
2005 KJ Renegade
Fabrications for sale: Aluminum Roof Rack (See Page 9)
Aluminum Gas Tank Skid -- Radiator Skid -- Front Strut Shims
Coming Soon: Rear Bumpers with lots of options

thanks for posting the pics for me i could not find a insert image button lol...

_________________
2010 liberty sport 4x4
rock krawler 3.5 lift
boiler shims
magnaflow exhaust
1.25 billet wheel spacers
245/75/16 mud claws (beefy)

Pardon my ignorance. What are "Boiler Shims"?

When I was in the Air Force I used to send newbies out to get some prop wash and a six foot section of flight line. Boiler Shims .. Must be a Navy thing....

I couldn't see any difference in the pictures, Is this like "Where's Waldo?"

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.

They are a OTT spacer shim made out of aluminum.... Just like the steel ones

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch

nevermind digger got it first lol

_________________
2010 liberty sport 4x4
rock krawler 3.5 lift
boiler shims
magnaflow exhaust
1.25 billet wheel spacers
245/75/16 mud claws (beefy)

Just saw that.....

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch

Having already done this there is 5/8" to about 3/4" of lift with a 3/8" shim. It is noticeable and improves the look of the KK. Not huge but an improvement on the nose dive look.Cheap alternative for those of us who cant afford a "real" lift. Yes Boiler offers a good product/price. Lets hope he'll make more things for the KK.

Thanks, Now I see the difference in the before and after pics

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.

Hope you dont mind if I repost mine here too.Before Shims
After shims installed.

"Boiler Shims" are top plate shims produced by Boiler....me. I also make roof racks, gas tank skids, radiator skids, and I'm currently working on a rear bumper. The shims can be used to gain a small amount of lift by themselves, or in conjunction with another lift, like OME/Rancho type lifts for some extra height.

_________________
2005 KJ Renegade
Fabrications for sale: Aluminum Roof Rack (See Page 9)
Aluminum Gas Tank Skid -- Radiator Skid -- Front Strut Shims
Coming Soon: Rear Bumpers with lots of options

I got my shims today... Thanks Boiler. Will have them installed soon. Just want to verify something though... It was said the lift gives approximately .75" of lift. I just want to verify if this is correct cause i want to plan ahead so i get my truck as level as i can the first time around when i do my lift

_________________
08 Revenge- Rock Lizard (Skink Sliders & Gecko Roof Rails), High Clearance Trimmed Front Bumper, Mopar skids, Riddler Diff Cover, JBA (5.5 Arms, 6" rear Springs, Front Adjust-A-Struts), 32" DuraTracs, Superior 4.56's, Front & Rear ARB Lockers, Fastman Throttle Body, AEM Intake, Hypertech Tune, Custom Ram Air, RunCool Louvers

I didn't measure mine before I did the shims. I was rotating my tires it was up on jack stand.When a friend came over helped do the shims.So I went to the dealership found an 08 and measured it.I have different tires but they are stock size.So that's how I got that measurement.

Don't know Boiler... I think there may be a certain member that would call this ambulance chasing...

_________________
SOLD!!!
2005 Liberty Renegade
STT CustomSTUFF
4" Stump Lift.
JBA UCA's
245/75/16 GOODYEAR DURA TRACS


Thanks for throwing me under the bus Evil... Just remember this when you decide to turn yours back in to a... Real Jeep.

Evasive maneuvers!!!!!!

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch

Hmm, I've heard that before somewhere but I can't remember where...

Someone was confused about the product so I enlightened them. I'm not here to sing and dance, I'm here to make cool stuff for the Liberty and to get things into the hands of those that want them. Call it whatever you want.

Hey don't you have another 20 or 30 threads to write about a lightbar?

edit: wait a minute...this thread was ABOUT my shims being installed. I think its fair to talk about them here...my name is in the thread title for Pete's sake!

_________________
2005 KJ Renegade
Fabrications for sale: Aluminum Roof Rack (See Page 9)
Aluminum Gas Tank Skid -- Radiator Skid -- Front Strut Shims
Coming Soon: Rear Bumpers with lots of options

And any post about about oil/ air filters etc JJ can jump in then and promote.
Any mention of lifts/shocks/any part for KJs/KKs Marlin ( jeepinbyal) can jump in as well

Lawyers chase ambulances
Boiler, well he has to try and make a buck somewhere!

A good product sells itself

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited