I added an OTIS unit w/ homelink to my rig.
I lucked out and got a great deal on a used OTIS unit (Thanks Steve!) so I decided to try installing it myself. The first thing I noticed after picking it up was that the switch for the sun roof was different than the one in my rig.
Mine

OTIS Unit

So after doing some measuring and investigating of the two units I decided to see if I could modify the OTIS to accept my switch. Not quite as clean of a cut job as the pros, but I think it should work.
Back

front side:

After fishing some wire through the head liner and down the A-pillar I attached the wires to the OTIS, cut a big hole in the head liner and mounted the OTIS unit.
Found the wires I needed to hook the other ends to the KJ and turned on the Jeep...... SUCCESS!!


All I got left to do to it is pick up an Ambient Temperature Sensor, plug it in and I'll be done!
_________________
Blood Clot Red 03 Punisher Edition245/75-16 Duratracs, Soft 8's, Ironman/clevis Lift, Monroe Sensa-trac rear shocks, JBA 3.5, GTP Hood Louvers, Roof Basket & Light bar,
Mudd's Garage Rear Bumpercustom made items: cross rails, grill inserts, cargo shelf, lightbar, pin stripping & rock rails.
L.O.S.T. #DW090501